6
Fundamental Safety Precautions
Do not use the machine in flammable or potentially explosive environments.
Persons who due to their physical, mental or motor response abilities are unable to operate the
machine safely may only use the machine under supervision or instruction by a responsible person.
Persons with heart pacemakers or other medical implants must not use this machine.
Children must not be allowed to use the machine.
Inspect the machine for visible signs of damage before use. Do not use a visibly damaged machine.
Before beginning work, check the condition of the safety chain and the function of the switches on
the machine.
Repairs to the mains cable may only be carried out by a qualified electrician.
Repairs to the machine may only be carried out by an authorised workshop or by the works after-
sales service. Unqualified repairs can lead to considerable danger for the user.
Repairs to the machine during the warranty period may only be carried out by a service centre
authorised by the manufacturer, as otherwise the warranty will be voided.
Defective parts may only be replaced with original spare parts. Only these parts guarantee that the
safety requirements are satisfied.
Do not leave the machine unsupervised during operation.
Store the machine in a dry, temperate location out of the reach of children.
Do not leave the machine standing outdoors and do not expose it to moisture.
Make sure that your work area is sufficiently lit (>300 Lux).
Do not use low power machines for heavy working.
Make sure that your workplace is clean.
Keep the machine clean, dry and free of oil and grease.
Follow the instructions on lubricating and cooling the tool
Electric Shock Hazard
Danger to life by electric shock!
Contact with live wires or components could lead to serious injury or even death!
Observe the following safety precautions to avoid electric shocks:
Do not open the housing of the machine. Risk of electric shock if live terminals are touched.
Never immerse the machine or the plug into water or other liquids.
Use only extension leads or cable drums with a cable crosssection of 1.5 mm².
Only use extension leads that are approved for the place of work.
Check the condition of the extension lead regularly and replace if damaged.
Avoid direct body contact with grounded parts (e.g., tubes, radiators, steel girders) to reduce
the risk of electric shock in the event of a defect.
