General Instructions Before Riding
1) To ensure the vehicle is functioning correctly, do a quick check
of the vehicle’s tires and check that the brakes are working.
(For more detailed maintenance instructions see the
Maintenance Schedule). Your vehicle has been thoroughly
checked by our engineers before delivery. but on the spot
checks are equally important.
2) When the key is inserted and turned to the "ON" position, the
power indicator will illuminate. If current drain is over 80A, the
power will be automatically cut off to avoid over-heating.
3）To avoid unplanned acceleration, always turn the key to the
“OFF” position before dismounting or leaving the bike
unattended.
4）SAFETY NOTICE: Be sure that you are seated on the bike and
stands are clear of the floor before touching the throttle handle.
If you twist the throttle before you are ready to go or while you
are mounting the bike it may run away from you and could lead
to an accident.
5）Be careful. The side stand is automatic rebound.
6）This vehicle may be ridden in wet conditions, but be sure to
avoid soaking it during cleaning to avoid damaging any of the
electric components.
7）The vehicle should not be left in strong, direct sunlight for long
periods as some of the electric components may overheat.
8）Motorcyclists must abide by the same traffic rules and
regulations as other motorists. Before taking your motorcycle
on a public road, be familiar with traffic rules and regulations
and any special requirements for motorcycles.
9）Never drink and ride. Alcohol slows reflexes and greatly limits
your ability to operate a motorcycle. Even a very small amount
of alcohol will reduce your ability to operate a motorcycle safely.
10）Frequently ride at economical speed will be great help
on battery life and range. Especially at crowded city traffic.
2
