Fbt AMICO 10 USB Manuel utilisateur
R
10 USB
Integrated Sound System
FBT elettronica SpA -
Via Paolo Soprani 1 - Zona Ind.le Squartabue - 62019 RECANATI - ITALY
Tel. 071 750591 - Fax. 071 7505920 - email: [email protected] - www.fbt.it
ENGLISH
INDEX
WARNING - IMPORTANT SAFETY INSTRUCTIONS - PRECAUTIONS
GENERAL FEATURES
COVER / HANDLE
GENERAL FEATURES
DIMENSIONS
CONNECTORS
ARTWORK
CONTROLS & FUNCTIONS
Mono Section / Stereo Section
Effect Section
Master Section
USB INTERFACE
SUPPLY AND POWER SECTION
BLOCK DIAGRAM
DIAGRAMS
THE AMICO SYSTEM IN VARIOUS APPLICATIONS
TECHNICAL SPECIFICATIONS
AMICO 1O SAT
1
2/3
4
5
6
7
8
9
10
11
12
13
14
15
16/17
18
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
!
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
|
|
|
<
|
|
|
<
!
!
WARNING
|
|
|
<
|
|
|
<
!
IMPORTANT SAFETY INSTRUCTIONS
1
GENERAL FEATURES
PWM AMPLIFIER SWITCH MODE POWER SUPPLY ANALOG PROCESSOR TONE CONTROLS LIGHTWEIGHT
The new AMICO 10 USB is a completely integrated ready-wired sound system offering a convenient «plug & play» solution for houses of
worship, church youth group events, school classrooms, auditoriums and various school activities, business conferences and small musical
groups performing live in small to medium sized venues. The mixer, amplification and subwoofer are contained in a single ultra lightweight,
yet extremely sturdy polypropylene enclosure. A storage compartment in the rear of the AMICO 10 USB houses the two 2-way satellite
speakers, allowing the wheeled system to be transported as a one piece unit.
> Analog audio processor with 24dB/oct electronic crossover network and ADAP (Advanced Dynamic Active Protection) for total protection
of the components
> 3 class D power amplifiers with switch mode power supplies to power the subwoofer and the two satellite speakers
> Built-in mixing console with 6 x XLR mic inputs with phantom power supply, 2 x mono inputs and 4 x stereo input channels, 3-band EQ., 99
selectable digital effects with effects send & return controls, 1 x effects send, 1 x monitor send, headphone jack out and master volume
control
> USB in/out to play back music programs/files from a PC or to record from the master audio output of the AMICO to a PC
recording program
> The AMICO 10 USB provides a quick and easy set-up: complete system setup in less than 5 minutes
> Multi-function knobs to block/unblock and remove the cover/lid transport handle
> Removable back panel for access to the satellite speaker’s storage compartment. The back panel protects the satellite
speakers and keeps them secure when transporting the complete system
2
GENERAL FEATURES
Fully-integrated mixer
Fold-away cover / handle
Trolley-type transport system with
100 mm diameter non-marking
rubber wheels
Multifunction knobs to lock/release
or completely remove the cover-handle
Removable rear panel to protect and
immobilise the satellite speakers in
their storage spaces during transportation
All the integrated internal components are
prewired and ready for use, without requiring any
additional connections for truly
user-friendly operation
Multifunction compartment for system expansion
with wireless microphone, CD player, MD player, etc...
A pair of two-way passive cabinets
Satellites storage space with locating
guide to prevent even the smallest
movements
3
O
3 power amplifiers driving the
sub-woofer and 2 satellites
COVER / HANDLE
INSTRUCTIONS FOR OPENING ( TRANSPORT POSITION ) AND REMOVING THE COVER/HANDLE
4
3
12
4
GENERAL FEATURES
Speakon connector input for connection
to the system amplifier
Adapter for horizontal wall support
Built-in handle
Built-in adapter for stand mounting
FBT logo
Protective metal grille
5
AMICO 10 SAT
DIMENSIONS
6
SUPPLIED ACCESSORIES
CONNECTORS
XLR connectors are “female” for input devices and “male” for output signals. As a matter of fact, the XLR-XLR connecting cables used, for instance, to connect
a microphone to a mixer always have a female socket at one end and a male plug at the other end.
They are three-pole connectors often used to transmit balanced mono signals. XLR three poles correspond to ground (1), positive signal (2) and negative
signal (3) respectively. Generally, Cannon are used to connect microphones to mixers or preamplifiers; otherwise, they are often used to connect the
balanced outputs of a mixer to loudspeakers and monitors.
Jacks are the typical connectors used for transmitting two separate signals of two channels -right and left- by means of a single connector and, thus, they can
be mono or stereo.
Mono (TS) Jack connectors -also called unbalanced- differ from stereo (TRS) jack connectors –also called balanced- in their structure. Mono jack plugs are
divided into two parts, Tip and Sleeve, to which the two poles are connected: the two poles are, respectively, the real signal, through the wire of the mesh
(positive pole), and the earth, located at the level of the metal shielding mesh beneath the rubber protective coating.
Stereo or balanced Jack connectors are divided into three parts since they feature a central Ring connected to a second wire, which is the third pole (negative
pole). In this case, conventionally, as for balanced signals, the left channel travels over the tip and the right one over the ring. Stereo Jack connectors are often
used instead of the mono ones when a mono balanced signal shall be transmitted, i. e. in order to generate an audio signal without earth hum and interference
and, thus, as faithful to the original as possible.
Balanced connections are recommended mainly if cables are longer than three meters since the length is proportional to the possibility of interferences and,
therefore, it could affect signal “cleanliness”.
RCA connectors cannot be balanced since they only have two poles: signal (centre pin) and ground (outer ring). Therefore, they are unbalanced mono
connectors.
This type of connectors, often paired, are mainly used for the stereo signals of hi-fi devices such as CD or record player, etc.
SPEAKON is a connector which is specially adapted for connecting power terminals to loudspeakers; when inserted in an appropriate socket it locks so as to
prevent accidental disconnection; moreover it is equipped with protection against electrical shocks and guarantees the correct polarisation.
7
stereo
mono
schema
diagram
schema
diagram
RCA PHONO JACKS
CONNESSIONE DI USCITA STEREO CONNESSIONE DI USCITA BRIDGE
AL DIFFUSORE
TO SPKR
AL DIFFUSORE
TO SPKR
USCITA POSITIVA
POSITIVE OUT
USCITA NEGATIVA
NEGATIVE OUT
USCITA NEGATIVA
NEGATIVE OUT
USCITA POSITIVA
POSITIVE OUT
STEREO OUT CONNECTION BRIDGE OUT CONNECTION
maschio
male
femmina
female
schema
diagram
BASE
PUNTA
TIP
MONO SECTION STEREO SECTION EFFECT SECTION MASTER SECTION
SUPPLY AND POWER SECTION
8
ARTWORK
Table des matières
Autres manuels Fbt Système stéréo
