THEKEYPADBUZZER
At the same time that any of the AMBER LIGHTS go off to indicate
a system problem, a trouble buzzer may sound. (Installer option)
- -
To silence the trouble buzzer:
1. Pressa (“Bypass”)
2. Press m ) (“Trouble Zone”)
I
NOTE: Remember to unbypass the trouble buzzer after the problem
has been corrected. Thisis accomplished by repeating steps I. and
2. above.
l
A MOMENTARY BEEPoccurs whenever a key isdepressed, indicating
that the system has received the number you have entered
l
Approximately 7 to 10 CONTINUOUS BEEPSis verification that your
system has successfully reached the central monitoring station with
a signal.
l
STEADYBUZZING is a reminder to DISARM your system after entering
the premises through one of the predetermined exit and entry zones.
OPTIONAL DIGITAL KEYPAD FUNCTIONS:
Ifyour system has been designed to incorporate the”panic”option,
RwGniignal to the central station and may or may not sound
an alarm at your premises (depending on theoptionyou selected).
To send a panic signal:
1. Press c and
q
simultaneously for approximately % second
El Cl
NOTE: If silent panic was selected, you will not receive the vm
cation buzzer.
AMBUSH
n
2. To reset audible panic, press
q
for about % second.
cl
(installer lfyour system has been designed to incorporate the “ambush”
pre-set option,youll program a special AMBUSH CODE for “User 0” (see
option) programming Ambush Code, p. 6 .)
- To send an ambush signal:
1. Enter your User 0 &Digit Ambush Code
Example O-6-4-3-7
g 2. Enter any other user number (l-3) plus User O’s4-Digit Ambush Code
Example: 2-6-4-3-7
NOTE: If Ambush is not used, your user 0 code will function like all
other user arm/disarm codes]. 4
