FatShark DOMINATOR Manuel utilisateur

WARNING: DO NOT leave the headset exposed to direct sunlight. Sunlight will magnify through

the optics and burn holes in the OLED color ﬁlter. Damage from sunlight will not be covered under

warranty. Keep goggles in protective case when not in use.

WARNING: Always operate this product in a safe and responsible manner and observe local laws.

WARNING: The Dominator by Fat Shark is not a toy. This product contains small parts and is

intended to be operated by adults. Not for children under 14 years old.

Dominator Digital Headset User Manual

Rev. 270622(DDMMYY)

THIS HEADSET INCLUDES ANTENNAS AND BATTERY REQUIRED, NOT INCLUDED

1#1125 Dominator Headset

1 Carrying Case

1Head Strap

1 XT-60 Battery Adapter

1Lens Cleaning Cloth

25.8GHz RP-SMA Directional or Omni Antenna

25.8GHz RP-SMA Omni Antenna

1Headset Battery

2Fat Shark DOMINATOR

TABLE OF CONTENTS

Diagrams ...............................................................................................................................................................3

Button controls.....................................................................................................................................................4

Linking ...................................................................................................................................................................4

Standby Mode ......................................................................................................................................................5

Signal strength and channel selection ...........................................................................................................5

Share options .......................................................................................................................................................5

Video transmitter options...................................................................................................................................6

Camera options....................................................................................................................................................6

Display settings....................................................................................................................................................6

Recording options................................................................................................................................................7

Buzzer options......................................................................................................................................................7

Playback options..................................................................................................................................................7

Firmware information ..........................................................................................................................................8

Restore factory settings......................................................................................................................................8

Betaflight Setup....................................................................................................................................................9

Canvas Mode (Betaflight) ...................................................................................................................................9

OSD Setup (Betaflight)........................................................................................................................................9

Troubleshooting ..................................................................................................................................................11

DOMINATOR HEADSET SPECIFICATIONS

DISPLAYS:

Dual Full HD 1080p OLED displays

FIELD OF VIEW (FOV):

46°

HEADSET ADJUSTMENTS:

Inter-Pupillary Distance (IPD): 57–70mm

Adjustable Focus Range: +2 to -6 diopter

HEADSET INTERFACE

• 2 top buttons (enter, record start/stop)

• 5 way switch (menu navigation)

• 1 bind button (recessed - insert tool to press)

• 1 power button (mechanical press on/ press off)

HEADSET OUTPUT:

USB-C (HDMI)

INPUT POWER:

5.5mm Barrel Connector, 7–21V Center Pin Positive

SD CARD SLOT

Micro sized SD card reader for recording video and ﬁrmware updates

ANTIFOG FAN

Slide vent for control

ANTENNAS (REQUIRED, NOT INCLUDED)

4 RP-SMA (top for omni antennas, front for omni or directional antennas)

OPERATING FREQUENCIES:

5.725–5.850GHz

WEIGHT:

315 g

OPERATING TEMPERATURE:

32°–104°F (0°–40°C)

COMPATIBLE VIDEO TRANSMITTER PROTOCOL:

Avatar HD

3Fat Shark DOMINATOR

Bottom View

Rear View

Top View

Front View

RP-SMA CONNECTORS

FOR OMNI ANTENNAS

RP-SMA CONNECTORS

FOR DIRECTIONAL OR

OMNI ANTENNAS

ANTI-FOG FAN CONTROL

POWER BUTTON

USB-C

IPD AND FOCUS

MICRO SD CARD SLOT

VIDEO DISPLAYS

Each eye adjustment can be controlled separately.

Slide to adjust IPD (The spacing between your

eyes). Twist to adjust focus.

DIAGRAMS

4Fat Shark DOMINATOR

Linking is the process of pairing the video goggles with the video transmitter. You will need to complete the linking process in order for the goggles to receive

video from the transmitter. You can link multiple transmitters to the same set of goggles.

1. Power ON the goggles. Wait for the goggles to display the main standby screen.

2. Power ON the video transmitter. Wait for the LED to blink green.

3. Press the link button on the video transmitter, the LED on the video transmitter turns red.

4. Use a tool to press the link button on the goggles; they will beep to indicate link mode.

5. When linking is complete, the goggles will stop beeping and the LED on the transmitter will turn green.

LINKING

• The transmitter will not send a video signal unless the goggle it is linked to is turned on.

• The transmitter will power up and transmit on the channel selected at the goggle.

• By default, the Public Channel will be selected. This channel should not be used for ﬂying your drone and should only be used

to select a channel for operation.

• The system may prevent you from selecting channels currently in use by other pilots.

• Once you have selected a channel, the goggle and transmitter will go to your selected channel on future power ups.

• If your previously selected channel is occupied by another pilot while your system is not powered up, the system may default

back to Public Channel and prompt you to pick a dierent channel.

Right-hand view

BUTTON CONTROLS

After linking the video transmitter will operate under these conditions

RECORD

BACK

5-WAY SWITCH

LINK

POWER INPUT

Press the 5-way switch in the center,

or up/down/left/right for dierent

functions from the button.

Button Input Action

Back Short press Back one level Escape

Record Short press Start/stop video recording

5-Way Switch

Press center Enter Pause/play

Press up Menu up

Press down Menu down

Press left Menu left

Press right Menu right

5-WAY SWITCH

5Fat Shark DOMINATOR

SIGNAL STRENGTH AND CHANNEL SELECTION

STANDBY MODE

SHARE OPTIONS

6Fat Shark DOMINATOR

CAMERA OPTIONS

VIDEO TRANSMITTER OPTIONS

DISPLAY SETTINGS

Camera, Transmit Power,

Frame Rate, and

Low Battery tabs have

sub menus available.

Select the tab to open the

sub menu.

7Fat Shark DOMINATOR

RECORDING OPTIONS

PLAYBACK OPTIONS

BUZZER OPTIONS

8Fat Shark DOMINATOR

FIRMWARE INFORMATION

RESTORE FACTORY SETTINGS

9Fat Shark DOMINATOR

OSD SETUP (BETAFLIGHT)

1. Connect the Flight Controller to Betaflight 4.x (MultiWii API version 1.41) or above

2. Select “Ports”

3. Select UART port that is connected with VTX, and set baud rate to 115200.

4. Save

CANVAS MODE (BETAFLIGHT)

Currently only Betaflight supports msp_displayport. Do not attempt to perform this CLI update on INAV. Please make sure that the FC firmware version is the latest version