INTRODUCTION
PAGE 3
INTRODUCTION
Read this manual carefully
before operating your FAST
equipment. The information pre-
sented will prepare you to safely
operate and service your
machine. Require all operators to read this
manual carefully and be acquainted with all
the operating and adjustment procedures
before attempting to operate. Failure to follow
the information in this manual and on decals
may result in personal injury or equipment
damage.
This manual should be considered a perma-
nent part of this equipment and should remain
with the equipment when you sell it. Replace-
ment manuals can be obtained from your
FAST dealer.
This equipment has been engineered and
manufactured to provide dependable and sat-
isfactory use. Like all mechanical products, it
will require cleaning and upkeep. Inspect your
equipment before putting it into service. Your
authorized FAST dealer has trained mechan-
ics, genuine FAST service parts, and the nec-
essary tools and equipment when service is
needed. Use only genuine FAST parts for ser-
vice or repairs. Substitute parts will void the
warranty and may not meet standards for safe
and satisfactory operation.
Warranty is provided as part of FAST’s support
program for customers who operate and main-
tain their equipment as described in this man-
ual. The warranty is explained on the warranty
certificate you should have received from your
dealer. This warranty provides you with the
assurance that FAST will back its products
where defects appear within the warranty
period. Should the equipment be abused, or
modified to change its performance beyond
the original factory specifications, the warranty
will become void.
These instructions have been compiled from
field experience and engineering data. Some
information may be general in nature, due to
unknown and varying operating conditions.
However, through experience and these
instructions, you should be able to develop
procedures suitable to your particular situa-
tion.
The illustrations and data used in this manual
were current at the time of printing. However,
due to possible in-line production changes,
your machine may vary slightly in detail. We
reserve the right to redesign and change the
machines as may be necessary without notifi-
cation.
Throughout the manual references are made
to right and left direction. These are deter-
mined by standing behind the equipment fac-
ing the direction of forward travel.
Equipment Identification
The equipment serial number is located on the
serial tag or serial plate attached to the main
frame.
Write the equipment serial number below. Use
the serial number when ordering parts and
service.
We recommend that you also file the model
and serial number in a secure place off the
machine.
MODEL___________________________
SERIAL NUMBER___________________
PURCHASE DATE __________________
