Multifunction power Meter instructions
WARNING! Please read the following instructions carefully before connecting this meter to electrical appliances.
Do not plug two or more meters together!
Indoor use only!
Not position the energy meter so that it is difcult to disconnect it from the supply!
iMportant
Don’t plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the
meter is required, remove from mains power and wipe meter with a dry cloth.
KeYBoard definition
1. MASTER CLEAR: Clear all data in memory including current time and all programs.
2. UP: Set current time, price, price programs combined with buttons SET; exchange 12-24 hour mode during clock display state.
3. SET: Set current time, price, price programs combined with buttons UP.
4. FUNC: Exchange display state. General features
Display current clock.1.
Display line voltage.2.
Display line current.3.
Display line power.4.
Display and memory accumulative total electric quantity.5.
Display and memory total on time and total electric charge,.6.
Display and memory total on time and total electric charge of price1.7.
Display and memory total on time and total electric charge of price2.8.
Display line frequency.9.
Display power factor.10.
Adjustable price / kWh11.
11 combinations of day or blocks of days available as follows:
MO / TU / WE / TH / FR / SA / SU
MO,TU, WE, TH, FR
MO,TU, WE, TH, FR, SA
SA, SU
MO, TU, WE, TH, FR, SA, SU BatterY
Insert the 3 pcs battery(LR44/AG13) according to the correct direction indication, close the cover of battery.Press master clear button after insert battery.now
the power meter is now ready to be set up for use.
Note: 1. The cover must be in place before use.
2. The battery must be taken out if not use for long time. tHe data displaY
Press FUNC button the data displays as follows:
VOLTac -> AMP -> WATT ->KWh ->TOTAL PRICE;TOTAL ON TIME -> PRICE1-> PRICE2
1.The meter will display current clock and line voltage, frequency, if plug in socket after insert battery without any operation.
2. Press FUNC button once and release, the meter will display current clock and line current, power factor.
3. Press FUNC button once again and release, the meter will display current clock and real power, power factor.
4. Press FUNC button once again and release, the meter will display current clock and accumulative KWh,power factor.
5. Press FUNC button once again and release, the meter will display total on time and total electric charge.
6. Press FUNC button once again and release, the meter will display total on time of price 1 and total electric charge of price 1.
7. Press FUNC button once again and release, the meter will display total on time of price 2 and total electric charge of price 2.
8. Press FUNC button once again and release, the meter will come back to display current time and line voltage.
Press and hold FUNC button for 5 seconds to clear accumulative total electric quantity and total electric charge during display state of total electric
charge or total electric charge of price 1 or total electric charge of price 2.
9. LCD display ----when total electric quantity, total electric charge overow, the OVER will ash at the same time.
settinG current clocK
Press FUNC button until the CLOCK displays in LCD.1.
Press SET button once time, The “WEEK DAY“will ash at same time, the clock change to SET mode. you can set the current clock now. 2.
Press UP button to set the “WEEK DAY“.3.
Press SET button once time again and release, The “HOUR“will ash.the “WEEK DAY“will stop ashing and keep display.4.
Press UP button to set the “HOUR“.5.
Press SET button once time again and release, The “MINUTE“ will ash. the “HOUR“will stop ashing and keep display.6.
Press UP button to set the “MINUTE“.7.
Press SET button once time again and release, the time come back to CLOCK display mode.8.
Press UP button during the CLOCK display state, change 12-24 hour mode.9.
To reset incorrect time, repeat above steps. After nish setting, Plug the meter into a regular 230 Volts power outlet, Plug in an appliance that you
want to use and turn the mains power on. Now the meter begins to measure the consumption of the appliance and detect the equipment that uses too
much electricity at once.
settinG price of cost/KwH
Press and hold FUNC button for 5 seconds during display state of voltage or current or power.
1. Setting price 1:
a. Press SET button once and release, SET display, the rst digital COST/kWh ash, press UP button to set it.
b. Press SET button once again and release, the second digital COST/kWh ash, press UP button to set it.
c. Press SET button once again and release, the third COST/kWh ash, press UP button to set it.
d. Press SET button once again and release, the fourth COST/kWh ash, press UP button to set it.
e. Press SET button once again and release, the radix point COST/kWh ash, press UP button to set it.
f. Press SET button once again and release, the weekday ash, press UP button to set it.
g. Press SET button once again and release, the hour of ON TIME ash, press UP button to set it.
h. Press SET button once again and release, the minute of ON TIME ash, press UP button to set it.
2. Setting price 2:
Press FUNC button once and release after nish Setting price 1. Setting price 2, repeat above steps.
stand BY Mode
Display of LCD will disappear without any operation after AC power off for 10 seconds. Press any key come back
to display.
EN
