Fantom Drives GF2000T Mode d’emploi

QuickStart

Installation Guide

Windows & Mac

Thank you for choosing Fantom Drives! Your Fantom Drives G-Force has

been built to the highest standard of quality and workmanship and, when

used according to the instructions in this guide, will provide years of

trouble-free operation. We at Fantom Drives take great pride in bringing

personal satisfaction to each of our customers.

Your Fantom Drives' disk drive is compatible with all USB-capable Apple

Macintosh computers running Apple® Mac® OS 10.4 (or greater) and

PC-Compatible computers running Microsoft® Windows ® XP, Vista,

Seven, and Windows Server® 2003/2008.

9-22-2010 1DMDUM-GF Rev 7(G)

The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation

of this document to assure its accuracy, Fantom Drives assumes no liability resulting from errors or omissions in this document, or from the use of the

information contained herein.

Fantom Drives reserves the right to make changes in the product design without reservation and without notification to its users.

Fantom Drives and the Fantom Drives Logo are registered trademarks of BNL Technologies, Inc. Macintosh, MacOS, and the MacOS logo are trademarks

of Apple Computer Inc. Microsoft Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other names and logos are

property of their respective owners.

or by any means, in whole or in part, without the prior written consent of Fantom Drives, 20525 Manhattan Place, Torrance CA 90501.

WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

FCC Compliance Statements

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate

frequency energy and, if not installed and used in accordance with the instructions, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to equipment off and on, the user is encouraged to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna

• Increase the distance between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Fantom Drives

20525 Manhattan Place

Torrance, CA 90501

Sales: 310-320-7272

Support: http://www.Fantomdrives.com/help

www.Fantomdrives.com

By MicroNet

returning the Product to Fantom Drives. Fantom Drives is not liable

for any loss or damage to these items.

This limited warranty does not cover: (1) any consumables (such as

batteries) supplied with this product; cosmetic damages; damage or

loss to any software programs, data or removable storage media;

or damage due to the Product such as but not limited to excessive

heat or humidity, or modifications of this Product; (2) improper

installation, operation, testing or maintenance of this Product;

(3) power failure or connection to improper voltage supply; or;

(4) attempted repair by any party other than Fantom Drives. This

Warranty does not apply when the malfunction results from the use

of this Product in conjunction with accessories, products or ancillary

or peripheral equipment, or where it is determined by Fantom

Drives that there is no fault with this Product itself.

This Limited Warranty is invalid if the factory applied serial number

has been altered or removed from the Product.

Repair or replacement as provided under this warranty is the

exclusive remedy of the consumer. Fantom Drives shall not be

liable for any incidental or consequential damages for breach of

any express or implied warranty, breach of contract, negligence,

strict liability or any other legal theory related to this product. Such

damage include, but are not limited to, loss of profits, loss of data,

loss of use of the product or any associated equipment, down time

and purchaser’s time. Except to the extend prohibited by applicable

law, any implied warranty of merchantability or fitness for a particular

purpose on this product is limited in duration of this warranty.

Some states do not allow the exclusion or limitation of incidental or

consequential damages, or allow limitations on how long on implied

warranty lasts, so the above limitation or exclusions may not apply

to you. This warranty gives you specific rights; you may have other

rights which vary from state to state.

Contents

Introduction ............................................................ 2

Parts & Accessories List ......................................... 2

System Requirements ............................................. 3

Precautions............................................................. 4

Fantom Drives G-Force at a Glance ........................... 5

Connecting the drive to Your Computer ..................... 6

Formatting Your Fantom Drives External Hard drive ... 7

Formatting the drive in Mac OS X .............................. 7

Formatting the drive in Windows ............................... 8

Optimizing Windows Caching Algorithm .................... 9

How to safely dismount and turn off your

Fantom Drives External Hard drive ......................... 10

Troubleshooting /

Frequently Asked Questions (FAQ) ........................ 11

Glossary ............................................................... 14

Warranty Statement ............................................ 16

Contact Information .............................................. BC

One Year

Limited Warranty

Fantom Drives warrants this product (the “Product”) against defects in

material or workmanship as follows:

1. LABOR: For a period of one (1) year from the original date of

purchase from Fantom Drives or its authorized relseller, Fantom Drives

will repair defective Product (or, at its option, replace with a new or

recertified product) at no charge. After this 1 year period, you must pay

for all labor charges.

2. PARTS: For a period of one (1) year from the original date of purchase

from Fantom Drives or its authorized reseller, Fantom Drives will supply,

at no charge, new or rebuilt replacement parts in exchange for defective

parts of this Product. Any replacement parts will be warranted for

the remainder of the original warranty period or ninety (90) days from

installation by Fantom Drives. All exchanged parts replaced under this

warranty will become the property of Fantom Drives.

This warranty only covers the hardware components packaged with the

Product. This warranty does not cover any software contained in, or

included with, the Product; any such software is provided “AS IS”. Please

refer to any documentation included with the software for your rights

and obligations with respect to the software.

This warranty extends only to you, the original purchaser. It is not

transferable to any one who subsequently purchases the Product from you.

Proof of purchase in the form of a bill of sale (which is evidence that

the Product is within the warranty period) must be presented to obtain

warranty service.

To obtain warranty service you must take the Product, or deliver the

Product freight prepaid, in either it’s original packaging, or in a package

that provides the Product with a degree of protection equivalent to

that of the original packaging, to Fantom Drives. Items shipped with

insufficient packaging will void the item's warranty, and may be rejected

for service.

Fantom Drives is not responsible for any damage to, or loss of, any

programs, data, or other information stored on any media or any part

of any Product serviced hereunder. Be sure to remove all features,

parts, options, alterations, and attachments not under warranty prior to

2 15

Introduction

Welcome, and thank you for purchasing Fantom Drives G-Force,

the external hard disk drive from Fantom Drives.

Parts &

Accessories List

The package should contain the following items:

• Fantom Drives G-Force

• USB Cable

• AC Adapter

• Quick Start Installation Guide

If you are missing any items listed above, please fill out the

customer support form at:

http://micronet.com/support/missingpart.htm

Please retain a copy of your receipt. You will need it if warranty

repair service is required in the future.

Byte - A unit of digital data, usually made up of eight bits.

Data Stream - The flow of data between digital devices such as

computers and hard drives.

Driver - Software that enables the computer to communicate

with a peripheral.

Gigabyte - 1,024 Megabytes, or approximately one billion bytes.

The capacity of most hard drives is measured in Gigabytes.

Hardware - Physical components of a computer system

(computer, hard drives, printers, etc.)

Hub - A device which links peripherals together onto the same

bus.

Interface - Junction between two items of hardware or software

for the exchange of data.

Mb (Megabit) - One million bits.

Mbps (Megabits per second) - A data transmission speed of

one million bits per second. Data transmissions are typically

measured in bits (kilobits, megabits etc) per second.

MB (Megabyte) - 1,048,576 bytes.

Operating System (OS) - Software that controls the assignment

and use of hardware and application software resources.

Peripheral - A generic term for hard drives, printers, scanners

and other discreet devices that add functionality to a computer.

Port - A connection which enables compatible peripherals to

send and receive data.

Software - A set of instructions that enable the computer to perform

pre-programmed functions in the order specified by the user.

Storage - Any equipment which stores data, such as hard

drives, CDs, and DVDs.

14 3

Q: I do not see my drive listed in the My Computer window,

but it does appear in the Device Manager list.

A: Right-click on My Computer. Select Manage in the pop-up

menu. In the Computer Management window and navigate to

Storage -> Disk Management. In the Disk Management window,

you should see a list of available storage devices. Look for the

disk that has a capacity closest to your Fantom Drives unit,

and right-click on the corrolating right-hand box. In the pop-up

menu that appears select "Delete Partition." The description will

change to say “Online" & "Unallocated”. Right-click on the box

and select Create New Partition in the pop-up menu. When the

Partition Wizard appears, select "Primary Partition" and click

"Next." Click "Next" in the next dialog, selecting the default value

for the drive. You will then see a drive letter (you can change

this drive letter if you wish); click "Next." You will then be asked

to format the drive.

Q: After I connected the drive to my PC, I got the following

alert message: HI-SPEED USB Device Plugged into non-HI-

SPEED USB Hub.” What does this mean?

A: Windows 2000 and XP users will get this alert message if you

plugged the drive into a USB port that only supports USB 1.1.

This is fine, except your drive will operate at USB 1.1 speeds.

If an issue cannot be resolved by using our FAQ, please

contact Technical Support via the Fantom Drives support site

at http://www.Fantomdrives.com/help

Glossary

Bit - The smallest unit of digital data. In binary code, a bit is

represented logically as a either 1 or a 0.

Buffer - RAM cache that temporarily stores data so it can be

delivered to a device as it is needed.

Bus - An electronic link for the transmission of data between

digital devices, such as computers and computer peripherals.

System Requirements

System Requirements for Mac

• G4/G5 or Intel based Apple Macintosh Computer

• Mac OS X 10.4 or newer

• Available USB port or available eSATA port

System Requirement for PC

• Pentium-based PC with 733 MHz or faster CPU

• Microsoft® Windows® XP SP2, Vista, Seven

• Microsoft® Windows Server® 2003, 2008

• Available USB or available eSATA port

USB 2.0 compatibility with USB 1.1

USB 2.0 ports are backward compatible with USB 1.1.

However, if you connect the drive to a USB 1.1 port, it will

operate at USB 1.1 speeds.

If your computer does not have eSATA ports, you may purchase

an eSATA expansion card for your computer. Contact your

authorized Fantom Drives reseller for further details.

4 13

Precautions

Failure to follow the precautions described below may cause

damage to your Fantom Drives External Hard drive and void the

warranty.

• DO NOT open the case. Doing so will void the warranty.

• DO NOT use a third-party AC adapter or power cord. Doing so

may damage the drive and void the warranty.

• DO NOT bump, jar or drop the drive as this may damage it and/

or result in loss of data.

• DO NOT disconnect any cables while the drive is powered on

without first properly dismounting the device via your operating

system; doing so can result in data loss and possible damage.

• DO NOT set any liquids or beverages on the drive as they may

damage the internal electronics.

• Fantom Drives highly recommends that you regularly back-up the

files stored on your Fantom Drives external hard drive.

Fantom Drives is not responsible for any data loss, nor will

Fantom Drives perform any recovery of lost data or files.

FAQs for PC Users:

Q: My computer does not recognize the drive.

A: Make sure all of your connections are secure. If you have an

add-on card, make sure it is working properly and/or update the

driver. Also, make sure you have all the latest updates for your

Windows installation

Q: Does the drive work with Norton Ghost?

A: Yes. Norton Ghost 2003 or newer support USB drives.

Fantom Drives does not provide any additional drivers.

Q: I formatted my hard disk under Windows XP, but my Vista

machine does not allow me to delete or modify files on the drive.

A: Windows Vista and XP handle file permissions differently. In

Windows XP the default user group has full permissions to every

volume, whereas in Vista they do not. To fix this condition, you

need to grant the users group modify privileges to the drive:

1. Right-click the drive letter in Explorer and select properties

2. Click the security tab

3. Click "Edit." You will be asked to enter your administrator password.

4. Select "Users" and check the Modify box

5. Click OK.

Q: Where are the drivers for my operating system?

A: Windows 2000 and newer already include all the necessary

drivers. There are no drivers available for Windows NT or 98.

Q: When I leave my computer idle for a while, my drive won’t

work properly.

A: The most likely cause is that your computer is going into

sleep mode. The immediate solution is to shut down your computer

and turn off the drive, and then restart your computer. Once your

computer is completely booted up, turn on the drive. You should

see the drive in the Windows Explorer. To prevent this problem

from recurring, open the “Power Settings/Energy Saver” and set

it to never go into sleep mode.

12 5

Q: Can I leave my G-Force on all the time, or should I turn it

off when not in use?

A: The G-Force is meant to be left on, but does not add any

limitations on being turned off. Drive reliability is affected by

repeated power cycles, and the G-Force cannot alleviate this.

In addition, Micronet recommends that the drive’s power supply

is connected through a UPS or surge protector; In the case of

a power surge, or brown/black out, the hard drive’s sensitive

electrical components will not be damaged.

FAQs for Mac Users:

Q: Why is my drive asking me to format it? It was already

formatted and it contains data.

A1:Run a disk repair utility on the drive.

A2:Perform permission repair on your system drive. Open the

disk utility (located in /Applications/Utilities/Disk Utility.app.)

Select your system drive (usually the first disk listed) and click

"Repair Disk Permissions" in the "First Aid" Tab.

A3:Restart your computer. As soon as the bootup chime

sounds, press and hold down the option-command-p-r key

combination to reset the PRAM. Release the keys when

the chime sounds a second time. Please refer to your Mac

manual for more information on these procedures

Q: My computer does not recognize the drive.

A: Check to make sure that all of your connections are secure

and that the power switch is in the "ON" position. Then check if

your External Hard drive is listed in the Apple System Profiler. If the

problem persists, verify that the appropriate port used is functioning.

Q: I'm trying to copy files to/from FAT32 volumes or network

shares, and it keeps failing.

A: FAT32, HFS+, and other file system formats allow different

standards of filename length or use of special characters.

Rename the offending file(s) and try the operation again.

Q: I have a FAT32 disk, and when I try to copy a large file I

get an error saying there is not enough room on the drive-- I

have lots of free space!

A: FAT32 only allows files up to 4GB in size. To copy larger files,

please reformat the volume using MacOS Extended Format.

Fantom Drives G-Force

Hard Disk

at a Glance

AC Adapter Port

Power Switch

USB 2.0 port

Disk Activity/Power

Indicator Light

eSATA port

Security Lock Slot

6 11

Troubleshooting/

Frequently Asked

Questions (FAQs)

General Questions

Q: I bought a 500GB drive, but my computer is showing

465GB. Where is the missing capacity?

A: Hard drive manufacturers market drives in terms of decimal

(base 10) capacity. In decimal notation, one megabyte (MB) is

equal to 1,000,000 bytes, and one Gigabyte (GB) is equal to

1,000,000,000 bytes. Many operating systems use the binary

(base 2) numbering system to describe disk capacity; In the

binary numbering system, one megabyte is equal to 1,048,576

bytes, and one gigabyte is equal to 1,073,741,824 bytes.

Simply put, decimal and binary translates to the same amount

of storage capacity.

Q: Is my external hard drive bootable?

A: Yes! As long as your host hardware and operating system

support booting from eSATA or USB. Refer to your computer’s

documentation for more information

Q: My drive was working fine yesterday but now its gone!

A: The disk may have been shut down without being dismounted,

or may have failed. If you do not hear and feel the drive spin up

when you connect the power, the drive will need to be replaced.

If you verify that the computer input and the drive data cable are

working, you may be able to repair or recover the data with your

computer’s disk repair utility or a third party utility.

If your disk repair utility cannot repair or see the disk, the

drive has failed and will need to be replaced. If data recovery

is desired, please contact an established professional data

recovery firm. For a checklist of what qualities you might seek,

see www.drivesavers.com/why_drivesavers/index.html or www.

ontrack.com/services.

Connecting the drive

to Your Computer

1. Plug the AC adapter cord into the power port on the back of

the drive. The plug should not require much effort to insert. If

the plug will not go in, do not force it; the plug is probably upside

down. Rotate the plug and try again. Incorrectly inserting the

plug could damage the drive and void the warranty.

2. Plug the power cord into the cord socket in the AC adapter.

Plug the other end into an AC outlet.

3. Connect the appropriate cable to your host:

USB and eSATA plugs are shaped so they can only

be properly inserted one way. Be sure to insert

the plugs properly or you may damage the drive

and void the warranty.

(USB) Connect the square USB 2.0 connector

(type B) of the included USB cable to the square

USB plug on the G-Force and the rectangular end

to a free USB port on your computer.

(eSATA) Connect an eSATA cable to a free eSATA

port on your computer.

If your computer does not have eSATA ports,

you may purchase an eSATA expansion card for

your computer. Contact your authorized Fantom

Drives reseller for further details.

4. Flip the power switch located on the back of the G-Force to

the "ON" position (labelled "-".) Once the drive is powered up, your

computer should recognize it and the drive will be ready to format.

10 7

How to Safely

Dismount and Turn Off

Your G-Force

What do 'mounting' and 'dismounting' mean? When a device

such as a hard drive is mounted, that means the computer

‘sees’ the device and is able to communicate with it. When you

dismount a device, the computer no longer sees it. The device

may still be running but the computer cannot access it, as

though the device no longer exists.

Never turn off or unplug a hard drive without dismounting it first.

Doing so could cause data on the drive to be lost or damaged.

How to safely dismount and turn off the

drive with the computer running

Mac Users

Drag the icon for the External Hard drive to the Trash. The drive will

dismount and you can then safely turn if off. You may then unplug the

power cord and data cable if you want to disconnect the drive.

PC Users

1. Locate the System Tray. The System Tray includes the time

display in the bottom right, and icons to the left of the time. One

of the icons will be an hot plug icon ( ).

2. Left-click on ( ). You will receive the alert message “Safely

Remove..” followed by the drive description and drive letter for

the device.

3. Left-click on the appropriate device (with the drive letter

matching the one used by the External Hard drive). After a few

seconds, Windows will give you a message that it is safe to

remove the device.

Formatting Your Drive

The G-Force comes preformatted at the factory with the NTFS file

system, the native file system for Windows

. Linux and Mac OSX

hosts require a third-party driver such as NTFS-3G to achieve full

read/write capability with NTFS volumes. If you intend to use this

drive exclusively on MacOSX it is advised to reformat your disk with

the HFS ("Mac Extended") file system.

Formatting a hard drive erases all data contained on it. Please

be sure to create a copy of the files you wish to keep to another

location before reformatting.

Formatting the drive in Mac OS X

1. Launch the “Disk Utility” application located in Applications/Utilities.

2. Highlight your new drive and select the “Partition” tab

3. Select the new partition map type.

4. For each partition in the volume scheme, select the desired

file system format and volume name (optional)

Although it is possible to format using the DOS file system, we

do not recommend this as an artificial capacity limit may be

imposed on the drive and performance will be unpredictable.

5. Click the “Options” button. Select “Apple Partition Map” in the

dialog box and click “OK”.

6. Click “Apply.” Your Fantom Drives G-Force is ready to use!

Formatting the drive in

Windows Hosts

1. Open the disk management console. A list of the attached drives

and their respective volumes will appear. Select the G-Force Disk.

The Disk Management Console can be accessed by right-

clicking on the "My Computer" icon ( ) and selecting

"Manage" from the drop down menu. On Windows Vista

and newer, click the Windows Start menu orb, in the search

box type diskmgmt.msc, and press enter. Disk Management

is found under "Storage" in the resultant window. For an

illustrated guide, please see

http://www.fantomdrives.com/support/faqs

2. Right-click on the drive letter and select Format in the pop-up

menu. The Format dialog box will appear.

If the hard disk is not signed for

use, the New Partition option is

unavailable (superimposed no-entry

icon). In this case a signature can

be written on the hard drive by right clicking on the disk

description window and selecting "Initialize Disk".

3. Under Capacity, verify the drive capacity. It should be close to

the stated capacity of your drive in gigabytes.

4. In the File System pop-up menu, select NTFS. The default

formatting option is full format. A full format will fully verify the

disk media. A Quick format is quick, but will do less verifying of

the drive than a full format. Click Start. Once the format process

is complete, your external hard drive is ready to use.

5. In Windows XP and Vista, it is possible to optimize the drive

for performance or quick removal. To select your desired mode,

open the device manager (located in \Windows\System32\

devmgmt.msc on your system drive.) Right-click Fantom Disk in

Disk drives, and select properties. Select the Policies Tab near

the top left of the window, and click your desired optimization

level. Press OK when finished, and you may close the disk

management applet.

8 9

Optimizing Windows Caching Algorithm

By default, Windows XP optimizes caching for performance on

external drives. Vista optimizes caching for quick removal. As a

result, Windows XP appears to have faster access to external

disks but at a greater risk of data corruption and loss. To

change Windows' caching algorithm, open the disk management

console (as described on page 8) on your system drive. A list of

the attached drives and

their respective volumes

will appear. Right-click

on the Fantom external

disk in the disk list and

select properties. Select

the Policies Tab near the

top left of the window,

and click your desired

optimization level. press

OK when finished, and

you may close the disk

management applet.

Optimizing for performance can greatly enhance the

throughput of your disk but is much more vulnerable to

data loss! Make sure to have appropriate backup strategies

before enabling this feature!

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fantom Drives Stockage

Fantom Drives

Fantom Drives G-Force Megadisk Mode d’emploi

Fantom Drives

Fantom Drives MDU1000 Mode d’emploi

Fantom Drives

Fantom Drives eXtreme Thunderbolt 3 Manuel utilisateur

Fantom Drives

Fantom Drives TFD1000U16 Mode d’emploi

Fantom Drives

Fantom Drives Gforce 3 Manuel utilisateur

Fantom Drives

Fantom Drives GreenDrive Quad Mode d’emploi

Fantom Drives

Fantom Drives DataShield Pro Manuel utilisateur

Fantom Drives

Fantom Drives MGD-16FC16A Manuel utilisateur

Fantom Drives

Fantom Drives MTT160 Mode d’emploi

Fantom Drives

Fantom Drives GDII1000EU Mode d’emploi

Fantom Drives

Fantom Drives Gforce 3 Mode d’emploi

Fantom Drives

Fantom Drives GD1000EU Manuel utilisateur

Fantom Drives

Fantom Drives MDE4000 Mode d’emploi

Fantom Drives

Fantom Drives GF1000EU Mode d’emploi

Fantom Drives

Fantom Drives G-Force Megadisk Mode d’emploi

Fantom Drives

Fantom Drives Titanium Manuel utilisateur

Fantom Drives

Fantom Drives MGT-08SC08A Manuel d'installation et d'exploitation

Fantom Drives

Fantom Drives GF1000T Mode d’emploi

Fantom Drives

Fantom Drives MGD-16FC16S Manuel d'installation et d'exploitation

Fantom Drives

Fantom Drives GD1000EU Mode d’emploi

Fantom Drives

Fantom Drives Black Diamond Mode d’emploi

Fantom Drives

Fantom Drives GF1000EU Mode d’emploi

Fantom Drives

Fantom Drives MXNAS2500 Manuel utilisateur

Fantom Drives

Fantom Drives DataDock II Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur