Fantec SQ-35RU3e Manuel utilisateur

Fantec SQ-35RU3e

4 x 3.5" SATA, HDD, RAID, USB3.0, eSATA

User Manual

Important:

All data is deleted when changing the RAID mode.

Backup the HDD(s) before changing the RAID mode.

Fantec SQ-35RU3e User Manual

1. Package Contents

- 1 x user manual

- 1x 4 bay hard drive enclosure

- 4x HDD bays

- 8 x screws

- 1 x USB 3.0 cable

- 1 x eSATA cable

- 1 x power adaptor

2. Notes

-eSATA and USB 3.0 connector (downwards compatible with USB2.0 and USB1.1)

-Auto energy saving function when PC is switched off

-25% less power consumption with Green Power Design

-33%less HDD temperature with 80mm fan and intelligent ventilation design

-Up to 5Gbps transmission speed per USB3.0 connection

-SATA-II interface: supports HDDs with SATA I, II, III

-4 HDDs, Plug&Play, hot swap

-Supports HDD capacity up to 4TB in GPT format, Windows 7/Vista

-Windows XP (MBR) supports HDD/Raid drives up to 2TB (4x500GB)!

Please note:

1. Read this user manual carefully before installing and using the product.

2. This product works in temperatures between 0oC and 40oC and in relative humidity

between 0% and 80%. Ensure a well ventilated working environment.

3. Do not block the ventilation openings to allow heat dissipation.

4. Do not place any liquids or chemicals on the device.

5. The power adaptor works with 12V, 5.4A, input 100V~240V. Do not connect any other

power supply to avoid damaging the device.

6. Do not cover the power adaptor and ensure sufficient ventilation.

7. The HDD must be properly attached in the HDD insert before being inserted in the

housing.

Fantec SQ-35RU3e User Manual

3. About the device

Hardware overview

DC input

Connector for supplied power adaptor

- 12VDC, 100-240VAC, 50-60Hz

PC connection

USB 3.0

Connect USB3.0 cable to computer

eSATA

Connect eSATA cable to computer

Note: In case of concurrent connection of eSATA and USB3.0 the PC detects eSATA.

Fan speed control

Controller

Use the controller to set the fan speed

LED indicators:

Power LED

Green

LIGHTS UP: switched on

OFF: switched off

HDD 1

Blue

LIGHTS UP: HDD connected

FLASHES: access (read/write)

FLASHES CONTINUOUSLY (3Hz): HDD fault

OFF: HDD not installed/removed/sleep mode

HDD 2

Blue

LIGHTS UP: HDD connected

FLASHES: access (read/write)

FLASHES CONTINUOUSLY (3Hz): HDD fault

OFF: HDD not installed/removed/sleep mode

HDD 3

Blue

LIGHTS UP: HDD connected

FLASHES: access (read/write)

FLASHES CONTINUOUSLY (3Hz): HDD fault

OFF: HDD not installed/removed/sleep mode

HDD 4

Blue

LIGHTS UP: HDD connected

FLASHES: access (read/write)

FLASHES CONTINUOUSLY (3Hz): HDD fault

OFF: HDD not installed/removed/sleep mode

Fantec SQ-35RU3e User Manual

Front / Rear view

Power LED

HDD1 LED

HDD2 LED

HDD3 LED

HDD4 LED

Fantec SQ-35RU3e User Manual

4. Hardware installation instructions

Step1: Push the Locker switch to the left side to unlock the HDD tray.

Step2: Take out the HDD trays.

Fantec SQ-35RU3e User Manual

Step3: Gluing the rubber pad to the middle at inner side of HDD tray if your HDD is a little

shorter.

Step4: Install the HDD into the tray and insert one screw on each side. Make sure screws are

firmly tightened, holding the tray and HDD together.

Fantec SQ-35RU3e User Manual

Step5: Slide HDD trays into the case.

Step6: Push the switch to the right side to lock the HDD tray.

Fantec SQ-35RU3e User Manual

5. RAID settings

With FANTEC SQ-35RU3e you can set the Raid versions described below. The SQ-35RU3e creates

from 4 physical drives one virtual drive. This is managed by the Raid housing. The virtual drive is

displayed as a “volume”on a Windows computer. Thanks to the virtual drive you can create a Raid

with the FANTEC SQ-35RU3e even with different HDD models. The HDDs may have both different

capacities and use different speeds.

RAID mode settings

Fantec SQ-35RU3e User Manual

Important: Backup the HDD(s) before changing the RAID setting.

1. Switch on the device.

2. Ensure that the desired number of HDDs is installed and that the respective HDD LEDs light up.

3. Connect the device via USB or eSATA cable to the PC.

4. Select the Raid mode by setting the “RAID switch” on the rear of the device.

5. Press and hold “RAID Reset”for 3~5 seconds to reset the HDD mode and to set the new mode.

6. Format the HDDs.

Note: Below you will find a detailed instruction for HDD formatting.

JBOD MODE (single):

JBOD mode displays each drive individually.

After connecting the device via USB or eSATA all drives are displayed.

Fantec SQ-35RU3e User Manual

BIG MODE (spanning):

BIG mode combines individual HDDs to a large drive and therefore seamlessly enlarges the

HDD capacity limitations as they apply for separately connected HDDs. With the BIG mode

you get maximum storage capacity without replacing existing HDDs with expensive new and

larger ones.

Note: It is not possible to subsequently add further data media or to remove individual drives

from Big, in both cases Raid would be inconsistent and your data are lost!

Table des matières

Autres manuels Fantec Enceinte

Fantec

Fantec DB-ALU3e Manuel utilisateur

Fantec

Fantec QB-35US3R Manuel utilisateur

Fantec

Fantec mobiRAID X2U31 Manuel utilisateur

Fantec

Fantec DB-R35DUE Manuel utilisateur

Fantec

Fantec MD-25US Manuel utilisateur

Fantec

Fantec MR-SA1041 Manuel utilisateur

Fantec

Fantec MR-35VU3R Manuel utilisateur

Fantec

Fantec QB-X8US3R Manuel utilisateur

Fantec

Fantec MB-X5U31H Manuel utilisateur

Fantec

Fantec MR-25D Manuel utilisateur

Fantec

Fantec DB-ALU2 Manuel utilisateur

Fantec

Fantec DB-228U3e Manuel utilisateur

Fantec

Fantec US330 Manuel utilisateur

Fantec

Fantec QB-35US3R Manuel utilisateur

Fantec

Fantec MR-35VU3R Manuel utilisateur

Fantec

Fantec DB-F8U3e Manuel utilisateur

Fantec

Fantec QB-35US3R Manuel utilisateur

Fantec

Fantec QB-35US3R+AES Manuel utilisateur

Fantec

Fantec mobiRAID X2 Manuel utilisateur

Fantec

Fantec QB-X8US3-6G Manuel utilisateur

Fantec

Fantec DB-AluSky U2e Manuel utilisateur

Fantec

Fantec NVMe31-FastLock Manuel utilisateur

Fantec

Fantec DB-ALU3 Manuel utilisateur

Fantec

Fantec AluPro U3 Manuel utilisateur

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Antec

Antec Dark fleet DF-10 Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur