Fagerhult e-Sense Organic G3 Manuel utilisateur
e-Sense
Organic G3
Subject to change without notice. Version5_20200424
e-Sense Organic G3 – Basic Functions ................................................................................................................................ 3
Relay function ............................................................................................................................................................................. 3
Factory settings........................................................................................................................................................................... 3
e-Sense Organic programming app .....................................................................................................................................4
IR interface for smartphones...................................................................................................................................................4
Programmable functions ......................................................................................................................................................... 5
Times and light levels ................................................................................................................................................................6
Default settings (personality).................................................................................................................................................6
Explanation of menu................................................................................................................................................................... 7
Factory settings ........................................................................................................................................................................... 7
Explanation of relay function..................................................................................................................................................8
Temporary dimming ..................................................................................................................................................................9
Pre-programmed settings (personality)......................................................................................................................10-11
Setting the time after last presence detected (Dwell time)........................................................................................ 12
Daylight dimming ......................................................................................................................................................................13
Simulating a wall panel ...........................................................................................................................................................13
Zoning ............................................................................................................................................................................................ 14
Relay programming information .........................................................................................................................................15
Zone X............................................................................................................................................................................................. 16
Identifying zones used............................................................................................................................................................. 16
Conguring scenes...............................................................................................................................................................17-18
e-Sense Organic wall panel.................................................................................................................................................... 19
EnOcean Wireless Push button panel ......................................................................................................................... 20-2 4
Read an EnOcean switch................................................................................................................................................................25
Wireless communication between nodes without IR link................................................................................... 26-27
Infrared transmission..............................................................................................................................................................28
Sensor node settings.................................................................................................................................................................28
Other parameters.......................................................................................................................................................................29
Disaster Recovery Mode ..........................................................................................................................................................30
Contents
3
Subject to change without notice. Version5_20200424
e-Sense Organic is an intelligent lighting control system based on distributed information between the sensors. The sys-
tem is optimised for large oces or similar spaces. Communication between the sensors is based on infrared light, similar
to regular remote controls. The signal from one sensor, which detects presence, is distributed via the oor to other sen-
sors nearby. These sensors transmit the information further, but include a change to not adjust up to full light, but rather
a lower level. The distribution continues with the same eect so that the light does not unnecessarily switch on too often.
In order to secure communication between the light ttings below constraints has to be taken into consideration during
installation:
Installation height 2.7–3.7 meters.
Disctance between luminaires 1.0 – 3.0 meters.
e-Sense Organic G3
The system functions immediately after power is supplied to the luminaires. No programming is required during the installation stage.
An important and unique feature in e-Sense Organic is the ability to transfer information between sensors, without phy-
sical interconnection. In daily use, this relates to information about presence, but, when programming the system, such
information can also be “relayed” to other luminaires.
Upon delivery, the factory settings can be used in an oce
environment. The time after last presence, and followed
by low level is 10 + 10 minutes. If presence is detected
again at any time during the intervals, the time is reset.
Max. illumination is 100%.
The sensor is equipped with multiple functions. A PIR
sensor for presence detection, IR transmitter, IR receiver
and a light sensitive diode for measuring brightness. It
also has two LEDs which indicate whether a certain fun-
ction is enabled.
Relay function
Factory settings
IR Transmitter
Light Meter
IR Receiver
PIR Sensor
Green indicator
4Subject to change without notice. Version5_20200424
The device is supplied with a USB charger. A blue LED
indicates charging is in progress. When connecting to a
smartphone or tablet, the volume will raised fully. The
volume will be reset when disconnecting the dongle. If the
volume is adjusted while the dongle is being used, it will
stop transmitting if the volume is below 50%.
The Organic Smartphone app is a simple, intuitive user application for optimising an e-Sense Organic installation.
An entire oce with luminaires can be optimised within minutes by pressing a few buttons. The app can be downloaded
from the App Store or Google Play and includes programming assistance and links to manuals. Immediately after down-
loading the app, you sign in to your LinkedIn or Google account to access programming functions. When this is done, an
application for "Congurator" must be made (this is done via the window in the upper left corner) - go to App Settings,
change from "User" to "Congurator", press apply!
The app contains all the relevant information and contextual help you need to use these simple functions.
The smartphone app communicates with sensor nodes in luminaires via IR communication from an interface connected to
the device’s headphone jack (3.5 mm). Always make sure to point the interface (dongle) at the sensor in the luminaire to
be programmed.
Access to e-Sense Organic programming app
IR Interface for Smartphone – Fagerhult Art. no. 86279
5
Subject to change without notice. Version5_20200424
All features and functions can be changed with an app and connected dongle.
The dongle communicates via infrared light, which is the same as between
luminaires.
You can download the app from Google Play or the App Store.
The dongle can be ordered from Fagerhult (Art. no. 86279).
Access to all the app’s functions is granted upon registration and
log-in via LinkedIn or Google.
Programmable functions
• Temporary dimming in a luminaire
• Temporary dimming in a zone
• Change the maximum light level
• Change the time since last presence
• Change “personality” – default settings for dierent environments.
• Daylight dimming
• Adjust PIR sensor sensitivity
• Change the PIR sensor’s behaviour upon presence detection
(Auto or Manual activation)
• Program Scenes (can be reset on the touch panel)
• Adjust functions on the touch panel
• Behaviour when powered up
• Zoning – certain luminaires are not aected, e.g. dierence between oce and corridor.
It is important to have an understanding of all the sections in the app when programming. You can always bring up more
functions and information by swiping your nger from right to left or left to right. The function used to save settings can
be found at the bottom of the app, together with the relay function (Relay). There is always more information to read
directly in the app by clicking the (i) icon – see red arrow.
Basic programmable functions:
Using the app’s functions
Menu from the right Menu from the left Menu from the bottom
Smartphone with Dongle
6Subject to change without notice. Version5_20200424
Various parameters can be changed to adapt the system to the environment in which it is installed.
• Presence. The light switches on at the set level. This function can also be blocked if you want to switch on the light
manually.
• Time after last presence detected (Dwell Time). The duration the light should remain at the same level after last
presence. Factory setting is 10 minutes.
• Lowlight Level. The level and time for which the light will indicate that it will switch o.
• If the light switches o completely or remains at a low level, each luminaire can be programmed individually
(Minlight Level)
Times and lowlight level are saved in default scenes
(personality). You can select a scene, save, and send on to
other luminaires using the Relay function. This means you
only need to program one luminaire, and then forward the
information further.
Times and light levels
Changing times and light levels
Default settings (personality)
7
Subject to change without notice. Version5_20200424
Various parameters can be changed to adapt the system to the environ-
ment in which it is installed.
• Zones – option for placing luminaires into zones that DO NOT af-
fect one another.
• Light Output – light level settings, max., min. and low level
• Personality – choice of default settings.
• Dwell Time – setting the time after last presence
• Daylight Dimming – setting the daylight dimming
• Scenes – 7 dierent scenes can be set.
• Absence Detection – automatic switch-on when presence is detec-
ted or manual switch-on (touch panel required).
• Wall Switch Setup – settings for touch panel, zoning, and IR
strength.
• Simulated Wall Switch – simulated touch panel.
• Start Up mode – On/Auto or for a certain scene during presence
• Infrared Transmission – increases or decreases the transmission
strength of a sensor.
• Sensor Node Settings – option to save settings in the app for use in
other installations.
• Other Parameters – setting the PIR sensor’s sensitivity, uores-
cent lamp burn-in time, etc.
• Disaster Recovery Mode – all light at full illumination for 90 mi-
nutes. Cannot be cancelled during the 90 minutes.
• Sensor Node Default Setting – refer to the table below.
Explanation of menu
Factory settings
Full light 100 %
Lowlight level 0 %
Basic light level 10 %
Time aer last presence 10 min.
Time at Basic Light Level 10 min.
Basic setting (personality) Open Floor
Daylight dimming Not enabled
PIR Sensor sensitivity High
Fluorescent lamp burn-in time Not enabled
Zoning (zone) 1
Scene 0 light level (on touch panel) 50 %
Scene 1 light level (on touch panel) 10 %
IR transmitting strength 30 %
Function at rst start-up Auto-sequence rst 15 minutes. Test function
Menu from the right
8Subject to change without notice. Version5_20200424
Explanation of relay function
The Relay function facilitates the programming of multiple
luminaires that will have the same setting.
For example, change the dwell time after last presence
from 10 min to 20 min on one luminaire. Save the change
with the app. You can now “relay” the setting to the other
luminaires in the same zone. Press Relay. The program-
med sensor will now ash once per second for 30 seconds.
The other sensors will have a solid red light under the PIR
sensor. This gives you time to ensure that all luminaires
have received the information. After this, all sensors revert
to normal operation, but with a 30-second change across
the entire installation.
One function that cannot be used as above is luminaire
zoning. For this, you will need to point the dongle at each
luminaire that will change zone. If you have multiple
luminaires, you can press the zoning button and hold it in
while moving underneath the luminaires being program-
med. The sensor will ash red.
9
Subject to change without notice. Version5_20200424
1. From the Light Output tab in the menu on the right, you can
dim one luminaire at a time or an entire zone. Try pointing the
dongle at a sensor and dimming the light. The buttons are label-
led “DIM”. Dimming is temporary and resets once the system is
switched o due to absence.
2. Point at the same sensor, but use the “ZONE” buttons to control
light output in order for it to be relayed to other luminaires in
the same zone. This is called relaying information between the
sensors. Dimming is temporary and resets once the system is
switched o due to absence.
Light levels
1. Here you can adjust and save light levels for presence, for
absence prior to switching o, and lowest level. If you have ad-
justed the light to the desired level for presence, you can save it
using the “Set Max” button. After this, you can relay the setting
to other luminaires in the same zone (they will immediately
adjust to the same level as the rst programmed sensor). The
same procedure is used for other levels. With the Minlight Level
function, you can also lock specic luminaires to constantly
remain at a lowlight level. This can be used as a security feature
in stairwells, lifts, or exits.
2. By saving the settings, you can reuse the same settings for other
luminaires, e.g. on another oor or at a later date. You can use
the Recall Settings feature to reuse the settings; refer to the
chapter titled Recall Settings.
Temporary dimming of a luminaire or zone
From the Light Output tab, you can also select a precise value for the
dierent light levels: max., min., and low level. Finish by relaying to
the zone’s other luminaires.
The “Revert to Auto Mode” function is used when programming
scenes. The function enables you to leave programming mode and
revert to normal operation.
Selecting a specic light value (Dimming Levels)
Revert to Auto Mode
1
1
2
2
10 Subject to change without notice. Version5_20200424
From the Personality tab you can choose from a number of default “personalities” or function libraries. Each personality
is selected for one type of environment and installation. The factory setting works for most environments, but especially
for open-plan oce landscapes. By installing the luminaires, then waiting to see how the setting functions, you will be
able to determine which changes need to be made for an optimal installation. Not included is the setting for max. illumi-
nation, this should be done on location.
Point the dongle at a sensor, select the desired
function. Finish with “Save settings”.
If multiple luminaires are to have the same setting,
use the relay function.
An important function in the default settings is how luminaires communicate with each other over distance. “Corridor”
switches on multiple luminaires but at a lower level over distance.
• Open Floor – open-plan oce landscape.
• Open Floor Saver – oce landscape, but with fewer luminaires that switch on fully based in proximity to presence.
• Super Saver – huge saving potential in an oce.
• Corridor – switches on multiple luminaires in order to illuminate the entire length of the corridor.
• Closed Oce – only switches on a few luminaires in proximity to presence; can be supplemented with extended time
after last presence.
• Amenities – suitable for rooms with low presence, such as toilets.
• Store Room – storage rooms, cloakrooms, etc.
• Breakout – suitable for oce meeting spaces.
• Demo – used to demonstrate the system’s functions, short duration between presence and switch-o.
• All On Always – lights always on, never switch o.
• 100/50/0 – only a few luminaires switch on in proximity to presence. Greatest possible savings.
• Ripples – used to visualise how the presence and relay functions work.
• Wall Wash – illumination at 100% regardless of distance to detected presence.
• Motion Only – luminaires only react to presence; no IR information is relayed. For demonstrating the presence function.
Pre-programmed settings (personality)
Saving a personality
Description of personalities
Table des matières
Autres manuels Fagerhult Système de contrôle
