| English10
erating this product. You can help prevent accidents
by being familiar with your product’s controls and by
observing safe operating procedures and safety signs.
Always use your common sense to avoid all situations
considered beyond your capability. Do not use while
that could be hurt, as well as items that could be dam
aged away, while operating. Never allow children or
people unfamiliar with these instructions to use the
product. Local laws may restrict the minimum age of
the operator. Bear in mind that the operator or user
is responsible for accidents or unexpected events oc
curring to other people, animals or their property. Do
not expose the product to excessive moisture, dust,
dirt or corrosive vapors. Do not mount equipment or
accessories on the machine not foreseen or approved
by the manufacturer. Never attempt to modify the
can result in serious personal injury or the death of the
operator or others. Consult your authorized dealer for
disassembly and service, not covered in this manual. If
prevent further damage. In case foreign body has en
tered the machine, stop it immediately, inspect it for
protective equipment when operating the unit.
Always wear clothing which does not hamper
safety boots with non–slip soles. Never wear
cessory and clothing that could catch in the ma
chine. Tie up your hair if it is long.
extinguisher.
Do not touch rotating parts and the cutting tool
hot during use and should be allowed time to cool
down before touching them.
All of the operational levers of the machine must
move from one position to the other easily and
must not need forcing. The electric cables and in
particular the main plug cable must be in perfect
protection devices must be clean and dry as well
as securely fastened to the machine. Operate the
always use the correct tool for each job in order
to avoid machine failure or injury and avoid over
loading the machine. The voltage and frequency
ratings of the electricity supply must be within
before operating.
it from mains:
fWhen mounting or removing accessories and
tools.
fWhenever you leave the machine unattended.
fDuring cleaning or maintenance.
fDuring machine repositioning, transportation or
storage.
In case of a malfunction or jam of the machine,
it from power source. The machine should not
be started again if the jam is not cleared or the
malfunction amended, at an authorized service
center when needed. The machine could poten
tially jam when:
fThe power tool is overloaded.
f
ing safety rules as well while operating:
f
Do not attempt to machine metal parts or any ma
terials that could fracture or shatter.
fDo not use cutting tools that are not sharp or well
ting tool must be replaced once it becomes worn
cutting tools designed for the machine.
f
be inspected at regular intervals.
f
spect the safety cover and feed table for proper
alignment and do not operate if out of alignment.
f
f
to use lateral pressure equipment and spring load
f
mobile table or similar equipment to place them
on while feeding.
f
f
sawdust and chippings from the machine when
running is strictly prohibited.
f
the cutting tool has reached the operating speed.
fDo not allow premature interruption of the cut
PT 204 PLUS | PTS 252 PLUS
