Ezviz Mini 360 Manuel utilisateur
UD01155B
EN
ES
FR
1
EN
Setup
Step 1 Power-on
Plug the power cable into the Camera and to the power adapter and then into a power
outlet, as shown in the figure below. The LED indicator will flash red and blue when
the camera is ready for setup.
Power Cable
Power Outlet
2
Step 2 Camera Setup
1. Create an user account
- Connect your mobile phone to Wi-Fi.
- Download and install the EZVIZ app by searching “EZVIZ” in App Store and Google
PlayTM.
- Launch the app and register for an EZVIZ user account following the start-up
wizard.
2. Adding a camera to EZVIZ
- Log in the EZVIZ app.
- From the EZVIZ app Home screen, tap “+” on the upper-right hand corner to go to
the scan QR code interface.
3
EN- Scan the QR Code on the bottom of the camera.
- Enter the verification code located on the bottom of the camera.
- Enter the correct time zone and DST information and tap “Finish” to finish setup.
3. To Change the Default Password
The camera uses the verification code as the default camera password. After
adding the camera, you are required to change the device password to ensure your
video security. The password is used for the Image Encryption. If you turn on the
Image Encryption, you are required to input your password when you live view or
play back the camera.
- Go to the camera settings screen to change the default password.
Bottom of the Camera
4
- Tap on “Change Password”.
- Tap on “Edit”.
- Enter the original verification code located on the bottom of the camera.
- Enter the new password. Please use letters and numbers between 6 to 12
characters.
5
ENThe camera can be mounted on the wall or ceiling.
• Make sure the wall is strong enough to withstand three times the camera's weight.
• The installation surface should be clean and flat.
1. Make sure the on the base towards you and fix the base to the wall with three
screws.
2. Align the camera to the base, and rotate the camera clockwise 15° to secure it
with the base.
3. Connect the power cable to the camera. If the camera was previously connected to
the Wi-Fi network, it will automatically connect back to the same Wi-Fi network.
Wall Mounting (Optional)
6
Turning on Smart Mask
- Log into the EZVIZ app.
- Select the camera in the home screen.
- Tap on the “Smart Mask” icon.
- The camera lens will rotate up and hide under the lens cover.
Smart Mask
Lens will rotate up under the lens cover
7
EN
Appendix
Box Content
Mini 360 (x1) Base (x1)
Power Cable (x1) Network Cable (x1) Screws (x3)
Power Adapter (x1) Quick Start Guide x(1)
8
Basics
Name Description
LED Indicator Red and Blue Alternately: Camera is ready for Wi-Fi setup.
Steady Blue: The camera is connected by a user.
Slowly Flicker in Blue: The camera is running properly.
Steady Red: The camera is starting.
Slowly Flicker in Red: The Wi-Fi connection has failed.
Fast Flicker in Red: The microSD card error.
Dual MIC
LED Indicator Speaker
Lens
9
EN
Name Description
Power Input 5V±10%
Network Interface 10M/100M Self-adaptive Ethernet Interface
Reset Button Hold down the reset button for 10 seconds to restore default settings.
MicroSD Card
Slot
Insert microSD card for local storage.
MicroSD Card Slot
RESET Button
Network Interface
Power Input
Table des matières
Langues :
Autres manuels Ezviz Caméra IP
Ezviz
Ezviz CS-C2C-D0-1D1WFR Manuel utilisateur
Ezviz
Ezviz C1HC H.265 Manuel utilisateur
Ezviz
Ezviz C6 Manuel utilisateur
Ezviz
Ezviz C2min Manuel utilisateur
Ezviz
Ezviz CS-C3A Manuel utilisateur
Ezviz
Ezviz CS-C3T Manuel utilisateur
Ezviz
Ezviz Husky Air Manuel utilisateur
Ezviz
Ezviz C2 Cube Manuel utilisateur
Ezviz
Ezviz C2 MINI Manuel utilisateur
Ezviz
Ezviz CS-C1C Manuel utilisateur
