Eyedro E5B-M-E3 Manuel utilisateur

Quick Start Guide

3-Phase

Electricity Monitoring System

with Wireless Mesh connectivity

Model: E5B-M-E3 /

E5B-M-E3-SUB

For applications not exceeding

600VAC

Before Getting Started

This Quick Start Guide provides very high level

installation instructions. Detailed installation in-

structions are available in the Product Guide at

eyedro.com/support

This product is intended for indoor use only

Installation may require the cover of the main electrical panel to

be removed while some wires are still electrified. Even when the

main breaker has been turned ‘OFF’ certain areas of the panel

may still be dangerous and carry the risk of shock, burn, and elec-

trocution. Installation should be performed by a qualified electri-

cian. DO NOT attempt installation unless you know where

electrified areas within the panel are.

Notes:

1. Always use the AC power adapter that came with your

E5B-M-E3(-SUB) system.

2. Do not plug your Eyedro power adapter into an Uninterruptible

Power Supply (UPS) as this will result in incorrect measure-

ments.

3. The AC power adapter must be powered via a circuit

that is downstream of the panel where the current sensors are

installed.

Visit eyedro.com for any

questions or comments.

We value your feedback.

Online Support Resources

Visit eyedro.com/support for online product setup

wizard, user manuals, videos, and various support

resources

Limited One Year Warranty

Full warranty details are available in the Product

Guide at eyedro.com/support.

Important: This product contains no user serviceable

components. Do not attempt to open the case of the

unit or tamper with the internal components. Doing so

will void the product warranty.

eyedro.com/support

Quantity Description

A1Eyedro module (3 port)

200A current sensor.

Note: Sensors NOT included

with –SUB models

C16VAC power adapter

1. Verify Package Contents 3. Install Hardware

3.1 Install current sensors on the line1 conductor of

the circuit(s) to be monitored.

1Line/Live/Hot conductor(s)

3.2 Connect sensors and power adapter to the Eyedro

module.

2. Record Serial Number:

(located under barcode on module)

_ _ _ - _ _ _ _ _

4. Create a MyEyedro User Account

4.1 Go to my.eyedro.com to create your online

account (or log in if you have an existing account).

4.2 Add the device to your user account:

go to Configuration, select Devices then enter the

serial number you recorded in Step 2.

4.3 ENJOY! Log into MyEyedro as often as you like to

view your electricity consumption.

4.4 For more details about the MyEyedro cloud service,

review the MyEyedro User Guide located at

eyedro.com/support

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Eyedro Instrument de mesure

Eyedro

Eyedro E5B-M-P2 Manuel utilisateur

Eyedro

Eyedro E5B-M-GWE3 Manuel utilisateur

Eyedro

Eyedro EH Series Manuel utilisateur

Eyedro

Eyedro EYEDRO-HOME Manuel utilisateur

Eyedro

Eyedro EBEM1 Manuel utilisateur

Eyedro

Eyedro E5B-M-T2 Manuel utilisateur

Eyedro

Eyedro E5B-M-GWE3 Manuel utilisateur

Eyedro

Eyedro E5B-EW-E3 Manuel utilisateur

Eyedro

Eyedro EHWEM1 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur