Eyeclon L3 POP Manuel utilisateur
EYECLON HD Driving Image Recorder
L3 POP USER’S MANUAL
www.eyeclon.com
■ Copyright laws prohibit this manual to be copied, modified or translated without the written consent of Eyeclon.
■ The contents in this printed manual may be updated, changed or modified without notice.
For latest L3 POP operating manual updates please see Eyeclon.com.
■Eyeclon has the right to change or modify the product and manual contents at anytime
without prior notice for improvements.
■ Customer is responsible for obeying all Federal, State, and Local laws concerning the operation of the L3 POP device.
Regulations for use may vary by region.
■ Eyeclon is not responsible for damages that can occur from using unauthorized parts and accessories.
■ The L3 POP device may NOT record videos of all accidents due to device settings and operating environments.
■ The Micro SD card should be checked periodically for errors due to wear and replaced as needed.
■ Properly install the L3 POP so that it does not interfere with the driver’s vision.
< NOTE >
02
Before Using Eyeclon’s L3 POP...
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION :
Any changes or modifications to the equipment not expressly approved by the
party responsible for compliance could void your authority to operate the equipment.
< FCC Statement >
03
Before Using Eyeclon’s L3 POP...
04
1. Warning and Caution .............5
2. Product Features .....................9
3. Product Overview .................12
4. Device Installation ................16
5. Basic Operation ....................21
- Using the Touch Screen
- Device Control
- LED Indicator Light
- File List Management
- Firmware Update
6. PC Viewer .............................41
7. Others ..................................53
- Product Specifications
- Troubleshooting
- Warranty
Table of Contents
01
Warning and Caution
■ Do not disassemble, repair, or remodel the device – this can cause an electric shock.
■ Unplug the power cable if you smell something burning , smoke coming out or anything unusual.
■ Do not spray water or liquid on the device as the device will not function properly.
■ Handle the device with care.
■ Plug the power cable all the way in to make sure it is connected to the device.
■ Do not use damaged power cable.
■ Do not cut, bend, or mishandle the power cable.
■ Place the device and the cables away from heat or expose to high temperature.
■ If the device is not being used for a long period of time disconnect the power cable from the main device.
as this can cause battery discharge in the vehicle.
■ Do not use the device next to flammable liquids or gas.
■ It is dangerous to operate this device while driving.
■ Use only the voltage that is provided for this device.
■ Do not apply extreme force and place heavy items on the device and the power cable.
■ Do not use wet hands when operating this device.
These cautions are provided for user’s safety and prevent damages in the device.
Please take the time to read the manual for proper product usage.
Information to prevent factors that can cause physical damage
Information to prevent service errors or system damage
Warning
Caution
!
!
!
!
Warning
06
Warning and Caution
Warning and Caution
07
Warning and Caution
■ Always keep the camera lens cleaned.
■ Make sure the device is firmly mounted during installation as it has a tendency to shift
when driving over speed bumps or unpaved roads.
■ If the device breaks, call or bring it to a service center.
Do not touch the device as your hands might get hurt from the broken parts.
■ Do not use the device for a long period of time with the vehicle’s engine turned off.
■ Collision incidents while driving are recorded and saved as continuous files.
■ Install the hardwire cable through a professional installer.
■ Use this device only with the original parts provided from the manufacturer.
■ Reception of the GPS signal can be affected by the weather, environment, or road conditions.
■ Install the device where it does not interfere with the driver’s view.
■ Do not apply excessive force on the Micro SD card or insert it in the wrong direction.
■ Store Micro SD card separately when an accident occurs or if the device is not operating properly.
■ Stay away from parking in areas with direct sunlight.
■ The resolution quality of the video can be affected by the environmental conditions.
■ Maintain the device and the power cable in a safe area.
■ Do not use the device in high temperature or humidity.
■ The recommended operating temperature is -20° ~ 60°C / -4° ~ 140°F.
■ Windows of the vehicle should be always cleaned to use the device at best.
■ Contact customer service if you feel the device is not working properly.
!Caution
Warning and Caution
08
Warning and Caution
■ Do not use a pin or a nail to push the LCD.
■ Do not use excessive force when using the control buttons.
■ Do not use chemicals to clean the device.
■ Keep the product away from children and pets.
!Caution
Warning and Caution
02
Product Features
■ 3.5” TFT LCD
Provides clean and clear video quality.
■ Format Free Technology
Provides automatic memory format and maximizes the stability and minimizes file errors of Micro SD Card.
Automatically overwrites files when storage capacity is needed.
■ PIP Multi Screen
Multi Screen feature allows you to view front / rear view screens simultaneously.
■ Audio / Voice Guide
Provides voice guide and alert sounds / messages.
■ Micro SD Card Format
Automatic Micro SD card format.
■ Front / Rear LED
Notifies the driver recording mode while driving, or parking.
■ 3 Axis Acceleration Sensor
Embedded G-Sensor senses the collisions and records them.
■ Various Recording
Continuous, Incident-Continuous, Incident-Parking, Parking, Manual Recording types.
■ Battery Discharge
Measures the voltage (battery) real time and prevents the vehicle from being discharged.
10
Product Features
Product Features
Table des matières
