Extron electronics SSP 7.1 Manuel utilisateur

SSP 7.1 Setup Guide

Overview

The Extron® SSP 7.1 is a 7.1 channel surround sound processor with four digital

inputs and one analog input. The unit accepts a range of source formats and

uses various listening mode options for use in 5.1 to 7.1 surround sound system

conﬁgurations.

The listening mode determines which audio signals will be passed to the speakers.

Each combination of source format and speaker conﬁguration has a default

listening mode. The default listening mode can be overridden by the front panel

controls and the SSP 7.1 Setup and Control Software to select a mode that matches

the requirements of the room and the personal preferences of the listener.

This guide provides basic instructions for an experienced installer to install and perform the initial conﬁguration of the

SSP 7.1. For further details, see the SSP 7.1 User Manual on the Extron Web site (www.extron.com).

SSP 7.1 Installation

Attach the four rubber feet provided with the SSP 7.1, and place the unit on any convenient ﬂat surface. The SSP 7.1 can

also be mounted in a rack with the optional rack-mounting kit (RSU 126, part number 60-190-10), or under furniture with

the optional under-furniture mounting kit (MBU 125, part number 70-077-01). For complete instructions on mounting the

unit, consult the SSP 7.1 User Manual, on the Extron Web site (www.extron.com).

SSP 7.1 Front and Rear Panel Features

a Conﬁguration port

b Input source format indicator

c Mode Override selector

d Input selections

e Volume adjustment knob and LED bar /analog input

gain level control and LED bar

f AC power input

g Audio inputs

h Audio outputs

i RS-232 port

NOTE: Neither the conﬁguration port nor the RS-232 port take precedence over the other. Instructions from either are

processed in the order they are received.

SSP 7.1 Cable Connections

The SSP 7.1 uses an IEC power cable to connect to a 100 - 240 VAC, 50-60 Hz, power source.

The SSP 7.1 accepts four digital inputs and one analog input:

• Inputs 1 and 2 accept digital signals through S/PDIF optical cables.

• Inputs 3 and 4 accept digital signals through S/PDIF coaxial cables.

• Input 5 accepts a balanced or unbalanced, stereo or mono analog input through a 5-pin captive screw connector.

The SSP 7.1 outputs are balanced/unbalanced, line level, analog signals that feed into multi-channel ampliﬁers for

conﬁgurations up to 7.1 surround sound. See the wiring card (included) to ensure correct connections to the SSP 7.1.

Connect the front panel Conﬁg port or rear panel RS-232 port to a PC that has the SSP 7.1 Setup and Control Software

installed (see "SSP 7.1 Setup and Control Software Installation" on the next page).

SSP 7.1

SURROUND SOUND PROCESSOR

1 2 3 4 5

CLIP

INPUTS

MODE OVERRIDE

TO ALL

PL II/IIx

DOWNMIX

DTS NEO:6

2-CH

PCM

DTS

SOURCE

CONFIG

VOLUME

4 5

100-240V .5A

50-60Hz INPUTS

DIGITAL

OUTPUTS SSP 7.1

ANALOG

FRONT CENTER SURROUND BACK RS-232

Tx Rx

SUB

WOOFER

LRLRLS RS LB/CB RB SUB

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. patent numbers: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467;

7,212,872 and other U.S. and worldwide patents issued and pending. DTS, DTS Digital Surround, ES, and Neo:6 are registered trademarks

and the DTS logos, symbol and DTS 96/24 are trademarks of DTS, Inc.

SSP 7.1 Setup Guide (Continued)

68-1339-50

Rev C

07 10

SSP 7.1 Setup and Control Software Installation

Install the SSP 7.1 Setup and Control Software on a PC running Microsoft® Windows® 2000 or later. For full details about

computer requirements, see the SSP 7.1 User Manual on the Extron Web site (www.extron.com).

Insert the provided disk into the computer's CD/DVD drive. The disk should open automatically. If it does not, open it from

"My Computer." Select the Software tab, locate the program, click Install, and follow the on-screen instructions.

The program can also be downloaded from the Extron Web site (www.extron.com) by clicking on the Download tab,

selecting Software from the list at the left of the screen, and locating the program. Click on Install and follow the

on-screen instructions.

By default, the program is installed in the folder C:\Program Files\Extron\SSP7.1 and an icon may be placed on the

computer's desktop.

SSP 7.1 Setup and Control Software Conﬁguration

The SSP 7.1 is "plug and play" for a 5.1 speaker setup. When the unit is

connected to power, an audio source, and speakers, it produces an audio

output that corresponds to the default listening mode for the current

combination of source format and speaker conﬁguration. If a different

listening mode or speaker conﬁguration is required, change it through the

SSP 7.1 Setup and Control Software.

1. Ensure the control computer is connected to the Conﬁg port or RS-232

port of the SSP 7.1.

2. Start the software. The program opens with the "Connect to device?"

dialog box (shown in the ﬁgure at right).

3. Decide whether to connect directly to the device (Live mode) or to

work in Emulate mode (check the Emulate/Work ofﬂine box). For more

information about Live and Emulate modes, see the SSP 7.1 User Manual.

4. If working live, you may need to change the computer port and baud

rate. The default baud rate is 38400.

5. For Live mode, click Connect. For Emulate mode,

click Work Ofﬂine.

6. The program opens with the Main tab selected

(shown in the ﬁgure at right). There are a

total of three tabs (Main, Speaker Setup,

and Listening Mode Setup). Four further

tabs are available under the Speaker Setup

tab (Speaker Conﬁguration, Speaker

Delay, Testing & Output Trim, and Speaker

Equalization). Three tabs are available under

Listening Mode Setup (Preferences, Override

Preferences, and Dolby, DTS, and Mono

Settings).

NOTE: The order of the tabs provides a logical

sequence for conﬁguring the SSP 7.1.

Extron recommends that each tab is

conﬁgured in the order it appears at the

top of the screen, from left to right.

The Main tab recreates all the features found on the front panel of the SSP 7.1. The remaining panels allow the speakers

and listening mode to be conﬁgured. Full details about using the SSP 7.1 Setup and Control Software can be found in the

SSP 7.1 User Manual on the Extron Web site (www.extron.com) or in the help ﬁle for the program.

Extron USA - West

Headquarters

+800.633.9876

Inside USA/Canada Only

+1.714.491.1500

+1.714.491.1517 FAX

Extron USA - East

+800.633.9876

Inside USA/Canada Only

+1.919.863.1794

+1.919.863.1797 FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800

+971.4.2991880 FAX

Autres manuels pour SSP 7.1

Autres manuels Extron electronics Équipement d'enregistrement

Extron electronics

Extron electronics RGB 192 Manuel utilisateur

Extron electronics

Extron electronics AXI 02 AT Manuel utilisateur

Extron electronics

Extron electronics TLI Pro 201 Manuel utilisateur

Extron electronics

Extron electronics SSP 7.1 Manuel utilisateur

Extron electronics

Extron electronics DMP 64 Manuel utilisateur

Extron electronics

Extron electronics RGB 109xi Manuel utilisateur

Extron electronics

Extron electronics RGB 203 Rxi Manuel utilisateur

Extron electronics

Extron electronics RGB 190FM Manuel utilisateur

Extron electronics

Extron electronics RGB 560 AKM Manuel utilisateur

Extron electronics

Extron electronics CIA111 Manuel utilisateur

Extron electronics

Extron electronics RGB 580x Manuel utilisateur

Extron electronics

Extron electronics StudioStation 100 Manuel utilisateur

Extron electronics

Extron electronics PIP 422 Manuel utilisateur

Extron electronics

Extron electronics RGB 500 AKM Manuel utilisateur

Extron electronics

Extron electronics Inline CIA116-1 Manuel utilisateur

Extron electronics

Extron electronics CVEQ1 WM Manuel utilisateur

Extron electronics

Extron electronics Converter CVC 200 Manuel utilisateur

Extron electronics

Extron electronics IPL T S Series Manuel utilisateur

Extron electronics

Extron electronics USB-C HD 101 Manuel utilisateur

Extron electronics

Extron electronics Computer-Video Interface RGB 508 AKM Manuel utilisateur

Extron electronics

Extron electronics Interfaces RGB 500 Series Manuel utilisateur

Extron electronics

Extron electronics RGB 304 Manuel utilisateur

Extron electronics

Extron electronics RGB 560 AKM Manuel utilisateur

Extron electronics

Extron electronics RGB 472xi Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien