Extron electronics XTP T HD 4K Manuel utilisateur

IMPORTANT:

Go to www.extron.com for the complete

user guide, installation instructions, and

specifications bef

ore connecting the

product to the power source.

XTP T HD 4K and XTP R HD 4K • Setup Guide

The XTP T HD 4K Transmitter and XTP R HD 4K Receiver are XTP®extenders for video, audio, bidirectional control, and Ethernet

transmission over a shielded twisted pair cable. This guide provides instructions for an experienced installer to install and connect

the XTP T HD 4K and XTP R HD 4K.

Transmitter Connectors Receiver Connectors

A DC power connector

B HDMI input connector

C HDMI Loop-Thru connector

and HDMI audio switch

D Analog Audio input

connector

E RS-232 and IR Over XTP

connector

F XTP output connector

G LAN connector

H DC power connector

I XTP input connector

J LAN connector

K RS-232 and IR Over XTP

connector

L HDMI output connector and

HDMI audio switch

M Analog audio output connector

N S/PDIF audio output connector

O Relay connectors

Figure 1. Rear Panel Connectors

Installation

Before starting, turn off or disconnect all equipment power sources and mount the transmitter or receiver on a table or in a rack.

Input Connections

1. Connect a digital video source to the female HDMI connector (see gure 1, B) on the transmitter. It accepts HDMI, DVI (with

an appropriate adapter), or dual mode DisplayPort video signals.

NOTES:

• Use an Extron LockIt®Lacing Bracket to secure HDMI cables to the rear panel connectors.

• Video input from a DisplayPort source must be a dual mode DisplayPort source.

2. Connect a digital video display to the HDMI Loop-thru connector (C) on the transmitter to locally display the input source. A

display that is not HDCP-compliant displays a green screen when HDCP-encrypted content is sent to it.

3. Connect balanced or unbalanced stereo audio to

the 3.5 mm, 5-pole captive screw connector (D).

Wire the connector as shown to the right.

XTP Interconnections

1. For the transmitter, connect a shielded twisted pair cable between the XTP output connector on the transmitter (F) and the

XTP input connector on an XTP twisted pair receiver or XTP matrix switcher. For the receiver, connect a shielded twisted pair

cable between the XTP input connector on the receiver (I) and the XTP output connector

on an XTP twisted pair transmitter or XTP matrix switcher.

ATTENTION: Do not connect this connector to a computer data or

telecommunications network.

The XTP T HD 4K and XTP R HD 4K are compatible with shielded twisted pair (F/UTP,

SF/UTP, and S/FTP) cables. Extron recommends using the following practices to achieve

full transmission distances up to 330 feet (100 meters) and reduce transmission errors.

• Use Extron XTP DTP 24 SF/UTP cable for the best performance. At a minimum,

Extron recommends 24 AWG, solid conductor, STP cable with a minimum bandwidth

of 400 MHz.

• Terminate cables with shielded connectors to the TIA/EIA-T568B standard.

• Limit the use of more than two pass-through points, which may include patch points,

punch down connectors, couplers, and power injectors. If these pass-through points are required, use shielded couplers

and punch down connectors.

POWER

12V

HDMI

0.7A MAX

Rx GTx

RS-232 IR

RxTx

−+ −+

LOOP THRU

RESET

AUDIO

OFF

AUDIO

XTP T HD 4K

LAN

SIG LINK

XTP OUT

INPUTS OVER XTP

POWER

12V

1.1A MAX

Rx GTx

RS-232 IR

XTP R HD 4K

RxTx

-+ -+-+

AUDIO

RESET

LAN

OVER XTP OUTPUTS RELAYS

SIG LINK

XTP IN HDMI

OFF

S/PDIF

XTP T HD 4K

XTP R HD 4K

AB CDEFG

HIJKLMNO

Do not tin

the wires!

Unbalanced Stereo InputBalanced Stereo Input

Tip

Ring

Tip

Ring

Slee

vesTip

Sleeve

Tip

TIA/EIA-T568B

Pin Wire Color

1White-orange

2Orange

3White-green

4Blue

5White-blue

6Green

7White-brown

8Brown

12345678

RJ-45

Connector

Insert Twisted

Pair Wires

Pins:

Wire color

White-green

Green

White-orange

Blue

White-blue

Orange

White-brown

Brown

Wire color

T568A T568B

White-orange

Orange

White-green

Blue

White-blue

Green

White-brown

Brown

268-2716-50 Rev. A

11 16

NOTE: When using shielded twisted pair cable in bundles or conduits, consider the following:

• Do not exceed 40% ll capacity in conduits.

• Do not comb the cable for the rst 20 meters, where cables are straightened, aligned, and secured in tight bundles.

• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.

• Separate twisted pair cables from AC power cables.

2. To pass bidirectional serial or infrared signals to a control or controlled device, connect

the device to the RS-232 and IR Over XTP connector (see ﬁgure 1, Eand Kon the

previous page). Wire the connector as shown to the right.

NOTE: RS-232 and IR data can be transmitted simultaneously.

3. Connect a host device or control LAN or WAN to the LAN RJ-45 connector (Gand J)

for pass-through 10/100 Ethernet communication. The LEDs indicate link and activity

status.

Output Connections

1. Connect a digital video display to the HDMI output connector (L) on the receiver.

2. Connect a balanced or unbalanced, stereo

or mono audio device to the 3.5 mm, 5-pole

captive screw connector (M) on the receiver

for 2-channel stereo analog audio. Wire the

connector as shown to the right.

3. Connect an audio device to the female orange

RCA connector (N) tor for digital S/PDIF audio output.

Control Devices, Relays, and Power Connections

1. Connect a host device, such as a computer, to the front panel female USB mini-B connector (see P

to the right) of the transmitter or receiver to congure the device or update rmware.

2. Connect the equipment controlled via momentary or latching contact, like projector screens or lifts,

to these normally open relays (O). Do not exceed 24 V at 1 A for each port.

3. Power either device in one of the following methods:

• Connect the provided external power supply to the 2-pole captive screw connector (Aand H) for local power.

• Connect an XTP Power Injector to the XTP twisted pair interconnection between an unpowered transmitter or receiver

and a locally powered XTP endpoint device or XTP matrix switcher (see the XTP Power Injector user guide at

www.extron.com),

• Connect the transmitter or receiver to an XTP matrix switcher and enable remote power on the XTP matrix switcher.

Operation

After the XTP devices and all connected devices are properly connected and powered on, the system is fully operational.

HDMI Audio Switch

On either device, move and hold (for about 1 second) the HDMI audio switch (Cand L) up to enable embedded audio on a

display connected to the associated HDMI connector or down to disable it. The switch returns to the middle position after it has

been released. The associated LED lights when audio is enabled and remains unlit when audio is disabled.

Conﬁguration and Control

To directly congure the transmitter or receiver, connect a host device to the front panel USB conguration port. On the host

device, use the Extron XTP System Conguration Software (recommended) or Simple Instruction Set (SIS™) commands in

DataViewer (see the XTP T HD 4K and XTP R HD 4K User Guide at www.extron.com).

Tx/Rx

Pins

RxTx

RS-232

RxTx

TxRx

RxTx

IR Device

RS-232 Device

Do not tin

the wires!

Balanced Audio Output

Tip

Ring

Tip

Ring

Sleeves

Unbalanced Audio Output

Tip

No Ground Here

Tip

Sleeves

XTP T HDMI

CONFIG

INPUT

AUDIO SIGNAL CLIP

HDCP

SIGNAL

ANALOG AUDIO

HDMI AUDIO

XTP T HDM

INP

NAL

LIP

NAL

AUDI

HDMI A

Autres manuels pour XTP T HD 4K

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Extron electronics Récepteur

Extron electronics

Extron electronics MTP T AV Manuel utilisateur

Extron electronics

Extron electronics TP Receivers Family Manuel utilisateur

Extron electronics

Extron electronics Fiber Optic Transmitter-Receiver Pair FOX 500 DVI... Manuel utilisateur

Extron electronics

Extron electronics XTP SFR HD 4K Manuel utilisateur

Extron electronics

Extron electronics XTP SFR HD 4K Manuel utilisateur

Extron electronics

Extron electronics FOX3 SR 301 Manuel utilisateur

Extron electronics

Extron electronics FOX3 T 301 Manuel utilisateur

Extron electronics

Extron electronics DTP3 T 202 Manuel utilisateur

Extron electronics

Extron electronics Receivers TP Series Manuel utilisateur

Extron electronics

Extron electronics MTP 15HD A Series Manuel utilisateur

Extron electronics

Extron electronics XTP R HWP 201 Manuel utilisateur

Extron electronics

Extron electronics DTP2 R 212 Series Manuel utilisateur

Extron electronics

Extron electronics XTP SR HDMI Manuel utilisateur

Extron electronics

Extron electronics PowerCage FOX SR HDMI Manuel utilisateur

Extron electronics

Extron electronics Twisted Pair Transmitter VTT001 Manuel utilisateur

Extron electronics

Extron electronics MTP 15HD A Series Manuel utilisateur

Extron electronics

Extron electronics Digital Video Transmitter and Receiver HDMI 201... Manuel utilisateur

Extron electronics

Extron electronics MTP 15HD RS Series Manuel utilisateur

Extron electronics

Extron electronics VersaTools MTP T SV Manuel utilisateur

Extron electronics

Extron electronics PowerCage FOX SR HDMI Manuel utilisateur

Extron electronics

Extron electronics XTP SR HDMI Manuel utilisateur

Extron electronics

Extron electronics Dual Link DVI Transmitter and Receiver DVI DL 201... Manuel utilisateur

Extron electronics

Extron electronics XTP FT HD 4K Manuel utilisateur

Extron electronics

Extron electronics FOX3 T 301 Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur