Extron electronics NAV E 401 D Manuel utilisateur

User Guide

NAV Pro AV Over IP

68-2978-01 Rev. A

01 22

NAV E 401 D and NAV E 201 D

Streaming HDMI Encoders

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within the

product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron website,

www.extron.com.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks (®), registered service marks (SM), and trademarks (TM) are the property of RGBSystems, Inc. or Extron (see

the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks (®)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, eLink, Flat Field, FlexOS, Glitch Free,

GlobalConfigurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,

MediaPort, NAV, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, ShareLink, Show Me, SoundField, SpeedMount,

SpeedSwitch, StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VN-Matrix, VoiceLift, WallVault, WindoWall, XPA, XTP,

XTPSystems, and ZipClip

Registered Service Mark(SM) : S3 Service Support Solutions

Trademarks (™)

AAP, AFL (Accu-RATEFrameLock), ADSP(Advanced Digital Sync Processing), AVEdge, CableCover, CDRS(ClassD Ripple

Suppression), CodecConnect, DDSP(Digital Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,

DSPConfigurator, DSVP(Digital Sync Validation Processing), EQIP, Everlast, FastBite, Flex55, FOX, FOXBOX, IP Intercom HelpDesk, MAAP,

MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), RoomAgent, Scope-Trigger, SIS,

SimpleInstructionSet, Skew-Free, SpeedNav, Triple-Action Switching, True4K, True8K, Vector™ 4K, WebShare, XTRA, and ZipCaddy



FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause interference. This interference must be corrected at the expense of the user.

ATTENTION:

• The Twisted Pair Extension technology works with unshielded twisted pair (UTP)

or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE

compliance, STP cables and STP Connectors are required.

• La technologie extension paires torsadées fonctionne avec les câbles paires

torsadées blindées(UTP) ou non blindées(STP). Aﬁn de s’assurer de la

compatibilité entre FCC ClasseA et CE, les câbles STP et les connecteurs STP

sont nécessaires.

NOTES:

• This unit was tested with shielded I/O cables on the peripheral devices. Shielded

cables must be used to ensure compliance with FCC emissions limits.

• For more information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide on the Extron website.

Battery

CAUTION: Risk of explosion — Do not replace the battery with an incorrect type.

Dispose of used batteries according to the instructions.

ATTENTION : Risque d’explosion — Ne pas remplacer la pile par le mauvais type de

pile. Débarrassez-vous des piles usagées selon le mode d’emploi.

ATTENTION:

• If not provided with a power supply, this product is intended to be supplied by a UL

Listed power source marked “Class 2” or “LPS” and rated output 12Vdc, minimum

2.0 A or 56Vdc (PoE), minimum 0.8 A.

• Si le produit n’est pas fourni avec une source d’alimentation, il doit être alimenté

par une source d’alimentation certifiée UL de classe 2 ou LPS, avec une tension

nominale 12 Vcc, 2.0 A minimum ou 56Vdc (PoE), minimum 0.8 A.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

CAUTION: Risk of minor personal injury.

ATTENTION : Risque de blessuremineure.

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the application easier.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0

[01]R000400300004000080000600[02]35 [17] [03]

E X! *X1$*X1**X2%*X2) CE}

NOTE: For commands and examples of computer or device responses used in this

guide, the character “0” is the number zero and “O” is the capital letter “o.”

Computer responses and directory paths that do not have variables are written in the font

shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are

written in the font shown here:

From the File menu, select New.

Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

viiNAV E 401 D and NAV E 201 D Encoders • Contents

Introduction .................................................... 1

About this Guide...................................................1

About the NAV System.........................................1

About the Encoder ...........................................1

About the Decoder ...........................................2

System Interaction and Capabilities ..................2

Features ...............................................................3

Installation ...................................................... 5

Mounting and Rear Panel Connections.................5

Installing the Optional Wall Box.........................6

UL and Safety Guidelines..................................6

Choosing and Preparing the Site ......................6

Make Rear Panel Connections..........................9

Test and Troubleshoot.......................................9

Complete the Physical Installation...................10

Connectors.....................................................11

Indicators and buttons....................................12

Connector and Cable Details..............................13

HDMI connectors ...........................................13

Control connector wiring.................................14

LAN and Ext connector ..................................14

Power supply wiring........................................15

Basic Operation............................................ 17

Power.................................................................17

Pairing Devices...................................................17

Operation ...........................................................18

System operation with a NAVigator.................18

Configuration and other operations.................18

Reset operations ............................................18

HTML Operation ........................................... 21

Opening the Embedded HTML Pages ................21

Using the HTML Pages.......................................24

Input Configuration Page ................................25

Output Configuration Page .............................27

Ties Page .......................................................35

Tools Pages....................................................36

Monitoring Page .............................................43

Settings Page.................................................47

About Page ....................................................57

Control System............................................. 58

Toolbelt...............................................................58

Global Conﬁgurator Plus and Professional ..........60

Global Scripter....................................................61

SIS Operation ............................................... 62

Host-to-Encoder Communications .....................62

Encoder-Initiated Power-Up Message.................62

Encoder Error Responses...................................63

Using the Command and Response Tables ........63

Common symbol definitions............................63

SIS Command and Response Tables..................64

Troubleshooting ........................................... 68

Alarms................................................................68

Contents

NAV E 401 D and NAV E 201 D Encoders • Contents viii

NAV E 401 D and NAV E 201 D Encoders • Introduction 1

Introduction

This section contains the following topics:

• About this Guide

• About the NAV System

• Features

About this Guide

This guide contains installation, configuration, and operating information for the following

Extron streaming encoders:

• NAV E 401 D Encoder — Streams HDMI video and audio over a managed 1G IP

network. Also supports Ethernet extension.

• NAV E 201 D Encoder — Streams HDMI video and audio over a managed 1G IP

network.

The encoders discussed in this guide are housed in mountable enclosures with decorator-

style wallplates. The encoders can be mounted in Underwriters Laboratories (UL) standard

wall boxes or using the included mud ring.

NOTE: In this guide:

• The NAV E 401 D and NAV E 201 D are both referred to as an “encoder.” They are

referenced by model name when differences exist.

• NAV encoders and decoders collectively are referred to as “endpoints.”

About the NAV System

The Extron NAV decoders and one or more compatible encoders form an AV distribution

and switching matrix on an Internet Group Management Protocol (IGMP) Managed IP

Network. The encoders are configured for low latency multicast streaming. The decoders

are configured to join the assigned multicast group.

About the Encoder

A NAV encoder inputs an HDMI video signal and generates a video and audio stream

that can be transmitted over an IP network using the Extron PURE3 Codec algorithm to

compress the data. The PURE3 Codec exceeds many of the performance characteristics of

existing compression formats and provides exceptionally robust protection against network

errors, making it ideal for quality-critical applications.

The data stream can include:

• HDCP-compliant HDMI video (which can include embedded digital audio [SMPTE 299M

and SMPTE 272M-A]) at resolutions up to 4k @ 60 Hz

• RS-232 and IR control signals

• NAV E 401 D only — An Ethernet Extension port allows communication to the same

network.

NAV E 401 D and NAV E 201 D Encoders • Introduction 2

You can manage the endpoints using an Extron NAVigator System Manager (see figure 1).

The base version of the NAVigator can control up to 16 endpoints with an expansion option

that can accommodate up to 240 endpoints.

The streamed NAV signal can also be routed using a managed network switch and can be

dedicated to a specific VLAN. AV switching can be done via a control system by interfacing

to the NAV decoder or the NAVigator.

NOTE: The RS-232 and IR communications are passive pass-through only.

The encoder and decoder do not generate or respond to the RS-232 and IR

communication signals.

CONFIG

NAVigator

LAN

LNK

ACT

00 BNAV

NAVigator

OOB NAV/PoE

LAN

Streaming

Network

Control

Network

HDMI

POWER

12V

2.0 A MAX L

Tx Rx GSG

RS-232 IRR

AUDIO

CONTROLOUTPUT

NAV SD 101

RESET

NAV 1G/PoE+

LAN

HDMI LOOP THRU

POWER

12V

2.0 A MAX L CONT

CTTx Rx GSG

RS-232IRR

AUDIO

LAN

CONTROLINPUT NAV E 101

RESET

NAV 1G/PoE+

HDMI

POWER

12V

2.0 A MAX L

Tx Rx GSG

RS-232 IRR

AUDIO

CONTROLOUTPUT

NAV SD 101

RESET

NAV 1G/PoE+

LAN

HDMI

POWER

12V

2.0 A MAX L

Tx Rx GSG

RS-232 IRR

AUDIO

CONTROLOUTPUT

NAV SD 101

RESET

NAV 1G/PoE+

LAN

HDMI LOOP THRU

POWER

12V

2.0 A MAX L CONT

CTTx Rx GSG

RS-232IRR

AUDIO

LAN

CONTROLINPUT NAV E 101

RESET

NAV 1G/PoE+

HDMI

POWER

12V

2.0 A MAX L

Tx Rx GSG

RS-232 IRR

AUDIO

CONTROLOUTPUT

NAV SD 101

RESET

NAV 1G/PoE+

LAN

Extron NAV E 101 Input 1

Extron NAV E 101 Input 2

Extron NAV E 101 Input 3

HDMI LOOP THRU

POWER

12V

2.0 A MAX L CONT

CTTx Rx GSG

RS-232IRR

AUDIO

LAN

CONTROLINPUT NAV E 101

RESET

NAV 1G/PoE+

Extron NAV E 201 D Input n

Extron NAV SD 101 #1

Extron NAV SD 101 #2

Extron NAV SD 101 #3

Extron NAV SD 101 #n

HDMIIN

HDMI IN HDMI OUT

STRM

HDMI HDCP

PWR

TLP 1000TV

Figure 1. Typical NAV Application

About the Decoder

One or more compatible decoders, such as the NAV SD 501 or NAV SD 101, decode the

data stream back into the original video and audio signal formats and output them locally.

System Interaction and Capabilities

Each encoder and decoder has an integrated web interface. All normal system configuration

and control is via the web interface of the NAVigator. Using a computer on the same

network and a standard web browser; such as Google Chrome™, Mozilla™ Firefox™, or

Microsoft®Edge™; you can configure any encoder or decoder unit in the system.

The embedded audio can be transported as a 2-channel LPCM uncompressed stream.

Audio can follow video to the same decoder or be broken away to a different endpoint.

A dedicated RS-232/IR port, a secure platform device (SPD), is available for distributing

RS-232 and IR data with the streamed video, such as for control of a projector.

The units are housed in 3-gang wall-mountable metal enclosures with decorator-style

faceplates available in black and white to match a variety of room decors.

The external 100 VAC to 240 VAC, 50-60 Hz power supply provides worldwide power

compatibility.

Autres manuels pour NAV E 401 D

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Extron electronics Convertisseur de média

Extron electronics

Extron electronics Scan Converter VSC 500 Manuel utilisateur

Extron electronics

Extron electronics DSC 3G-HD A Manuel utilisateur

Extron electronics

Extron electronics SME 211 Manuel utilisateur

Extron electronics

Extron electronics DVS 304 Series Manuel utilisateur

Extron electronics

Extron electronics SMD 101 Manuel utilisateur

Extron electronics

Extron electronics HAE 100 4K Plus Manuel utilisateur

Extron electronics

Extron electronics VSC 75 Manuel utilisateur

Extron electronics

Extron electronics IN1404XT Manuel utilisateur

Extron electronics

Extron electronics HDP 101 4K Manuel utilisateur

Extron electronics

Extron electronics SDI to Analog Video Converter SDI-AVR 100 Manuel utilisateur

Extron electronics

Extron electronics DVS 204 Manuel utilisateur

Extron electronics

Extron electronics NAV SD 501 Manuel utilisateur

Extron electronics

Extron electronics DVI to Analog RGB Video Converter DVI-RGB... Manuel utilisateur

Extron electronics

Extron electronics VSC 150 Manuel utilisateur

Extron electronics

Extron electronics BUC 202 Manuel utilisateur

Extron electronics

Extron electronics DSC 3G-HD A Manuel utilisateur

Extron electronics

Extron electronics Two InpuT VIdeo Scaler IN1502 Manuel utilisateur

Extron electronics

Extron electronics USP 507 Manuel utilisateur

Extron electronics

Extron electronics DVI-RGB 100 Manuel utilisateur

Extron electronics

Extron electronics SME 100 Manuel utilisateur

Extron electronics

Extron electronics Multi Video Processor MVP 104GX Manuel utilisateur

Extron electronics

Extron electronics DVS 406 Manuel utilisateur

Extron electronics

Extron electronics DVC RGB-HD A Manuel utilisateur

Extron electronics

Extron electronics Quantum Ultra Expansion System Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur