Extech Instruments ET60 Manuel utilisateur

ET60-en-US_V1.1 03/22

User Manual

Model ET60

Voltage/Continuity Tester

Introduction

The ET60 is an AC/DC Voltage tester with continuity check, NCV

detector and a work light. The attached test leads are connected

with 24” of 18-gauge wire rated at 600V. The 6” test lead

handles include spring loaded protective tip sleeves.

AC/DC Voltage

Always test on a known live circuit before use.

To check for voltage, insert test leads into outlet or carefully touch test leads

to the electrical contacts or circuit to be tested. If voltage is present, the LED

indicators will illuminate in the correct range.

Use the highest illuminated range to determine the correct voltage. If the

readings are greater than 120VAC or 48VDC, the meter will vibrate.

Non-Contact Voltage (NCV)

Always test on a known live circuit before use.

To check for non-contact voltage, place the meter near a source of electrical

energy. Press the ON/OFF button to measure NCV voltage. Note that the tip of

the meter offers the highest sensitivity. If voltage is present, the LED

indicators will illuminate.

Continuity

WARNING: To avoid electric shock, never measure continuity on circuits

that have voltage on them.

Touch the test leads to the circuit under test. The bulb at the top of the

meter will illuminate if there is continuity.

Worklight

Press the ON/OFF button to activate the work light and to measure NCV.

WARNINGS:

•Risk of Electric Shock. Always check proper operation on a known live circuit

before using.

•Never ground yourself when making electrical measurements.

•Do not use outside of rated voltages.

•Do not use in wet weather.

CAUTION: Use extreme caution when checking electrical circuits to avoid

injury due to electrical shock. FLIR Systems, Inc. assumes basic knowledge of

electricity on the part of the user and is not responsible for any injury or

damages due to improper use of this tester.

ET60-en-US_V1.1 03/22

SPECIFICATIONS

Non-Contact Voltage Range: 90~1000 volts AC

DC Voltage Range: 7 LED indicators from 6~220 volts

AC Voltage Range: 7 LED indicators from 24~600 volts

AC Voltage Frequency: 45~66 Hz

Power: Two 1.5V AAA batteries

Operating Temp.: 32~122°F (0~50°C)

Operating Humidity: 70% RH Max

Use clean, dry cloth to clean

OVERVOLTAGE CATEGORY III

Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations.

Note –Examples include switches in the fixed installation and some

equipment for industrial use with permanent connection to the fixed

installation.

Double Insulation: The meter is protected by double insulation or

reinforced insulation.

File No. 3160913

ISO-9001 Certified

www.extech.com

Table des matières

Autres manuels Extech Instruments Équipement de test

Extech Instruments

Extech Instruments ET26B Manuel utilisateur

Extech Instruments

Extech Instruments SL120 Manuel utilisateur

Extech Instruments

Extech Instruments 380395 Manuel utilisateur

Extech Instruments

Extech Instruments 480403 Manuel utilisateur

Extech Instruments

Extech Instruments 382357 Manuel utilisateur

Extech Instruments

Extech Instruments IRC350 Manuel utilisateur

Extech Instruments

Extech Instruments CB20 Manuel utilisateur

Extech Instruments

Extech Instruments 480400 Manuel utilisateur

Extech Instruments

Extech Instruments ET15 Manuel utilisateur

Extech Instruments

Extech Instruments 380366 Manuel utilisateur

Extech Instruments

Extech Instruments 422123 Manuel utilisateur

Extech Instruments

Extech Instruments TK36 Manuel utilisateur

Extech Instruments

Extech Instruments VT10 Manuel utilisateur

Extech Instruments

Extech Instruments ExStik PH150-C Manuel utilisateur

Extech Instruments

Extech Instruments PRC15 Manuel utilisateur

Extech Instruments

Extech Instruments ET20B Manuel utilisateur

Extech Instruments

Extech Instruments 380260 Manuel utilisateur

Extech Instruments

Extech Instruments MS6100 Manuel utilisateur

Extech Instruments

Extech Instruments 412300 Manuel utilisateur

Extech Instruments

Extech Instruments 480303 Manuel utilisateur

Extech Instruments

Extech Instruments 382252 Manuel utilisateur

Extech Instruments

Extech Instruments 380363 Manuel utilisateur

Extech Instruments

Extech Instruments BR146 Manuel utilisateur

Extech Instruments

Extech Instruments ET30B Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur