EXFO FTB-2 Manuel utilisateur



FTB-2/FTB-2 Pro and FTB-4 Pro

Accessing Connectors and Ports

Headset/microphone port

(for 3.5 mm connectors)

External monitor port

(for monitors compatible with a DisplayPort interface)

USB 2.0 host port

Ethernet (RJ-45) port

USB 2.0 host port

USB 3.0 host port

Module slots

(two or four slots,

depending on models)

Stylus

Built-in power meter and VFL (optional)

Replacing Batteries

Position the unit so that its front panel rests on a flat surface such as a table.

Lift.

Turn the screws counterclockwise until

the compartment door is loose.

Remove.

Charging Batteries

Connect your unit to AC

power with the provided

AC adapter/charger (FTB-2

and FTB-2 Pro) or

power cord (FTB-4 Pro).

Pull on the battery’s tab to free it

from its socket. 5

Slide in the new battery (poles facing down

and pointing towards the back of the

battery socket). 6

7Put back in place.

While applying slight pressure, turn the

screws clockwise until they are tightened.

Battery status LED

Green: Fully charged

Green, blinking: Charging

Yellow: Battery level is low

Quick Reference Guide

Printed in Canada (2017-03)

P/N: 1070843 Version: 3.0.0.1 For more information,

refer to the user guide.

Keyboard/screen capture button

Press once to show the on-screen keyboard.

Press once again to hide it.

Hold down for a few seconds to take a screen capture.

Task-switching button

Press once to view the list of running applications.

Press as many times as needed to select the

desired application.

On/Off button

Press for one second to turn the unit on.

Press for one second to send the unit to sleep (default behavior).

Using Your Unit

Information about the inserted module To start the applications related to

the module

Button bar

To access modules and instruments, test tools,

utilities, documentation, and to configure your unit

To retrieve information about your unit

To view the online help

Inserting Modules

For an FTB module,

press to turn off your

unit.

CAUTION

For FTB modules: Never insert or remove a module while the unit is

turned on. This will result in immediate and irreparable damage to

both the module and unit.

For FTBx modules: There is no need to turn off your unit before

inserting or removing modules. However, to remove them properly

and avoid problems, follow the instructions from the user guide.

2Place the module vertically so that you can

see its faceplate and the protruding edges are

on the left side.

3Insert the protruding edges of the module into

the grooves and push all the way to the back.

4Secure the module.

For an FTBx module, turn

the two retaining screws

clockwise.

For an FTB module, turn the

retaining screw (located on

the left panel) clockwise.

For heavier FTB modules such as the OSA or the FTB-88100NGE

PowerBlazer, secure the module with front locking screws

(turn clockwise).

Module adapters (must be installed before inserting FTB modules)

Autres manuels pour FTB-2

Ce manuel convient aux modèles suivants

Autres manuels EXFO Instrument de mesure

EXFO

EXFO Optical Xplorer OX1 Manuel utilisateur

EXFO

EXFO OSA20 Manuel utilisateur

EXFO

EXFO PPM-350C Manuel utilisateur

EXFO

EXFO IQS-2400 Manuel utilisateur

EXFO

EXFO OmniCure R2000 Manuel utilisateur

EXFO

EXFO IQS-5320 Manuel utilisateur

EXFO

EXFO EPM-50 Manuel utilisateur

EXFO

EXFO FLS-2600B Manuel utilisateur

EXFO

EXFO FLS-2200 Manuel utilisateur

EXFO

EXFO T500S Manuel utilisateur

EXFO

EXFO FPM-300 Manuel utilisateur

EXFO

EXFO Burleigh Wavemeter WA-1100 Manuel utilisateur

EXFO

EXFO IQS-1100 Manuel utilisateur

EXFO

EXFO ETS-1000L Manuel utilisateur

EXFO

EXFO FTB-5700 Manuel utilisateur

EXFO

EXFO IQS-1700 Manuel utilisateur

EXFO

EXFO FTB-5800 Manuel utilisateur

EXFO

EXFO PPM-350B Manuel utilisateur

EXFO

EXFO PMD Analyzer 5500B Manuel utilisateur

EXFO

EXFO ETS-1000G Manuel utilisateur

EXFO

EXFO R5000 Manuel utilisateur

EXFO

EXFO FTB-5600 Manuel utilisateur

EXFO

EXFO IQ-5320 Manuel utilisateur

EXFO

EXFO bv10 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

Acterna

Acterna MS1400 Manuel utilisateur