Evolur CRUISE RIDER Manuel utilisateur
Read all instructions before
assembling and using product.
IMPORTANT - Keep instructions for
future use. 0922R2-365EV
Owner’s Manual
CRUISE RIDER
Scan the QR code to register your product
https://www.evolurbaby.com/customer-care/product-registration/
2www.evolurbaby.com/help
…. for choosing Evolur and congratulations on joining our family;
a family that has been transforming lives for over 30+ years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to provide you with safe
and affordable baby products and accessories.
THANK YOU...
LIMITED WARRANTY:
• Evolur warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
• This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
• This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
3
www.evolurbaby.com/help
WARNINGS
IMPORTANT!
FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT
IN SERIOUS INJURY OR DEATH.
• ADULT ASSEMBLY REQUIRED.
• NEVER LEAVE CHILD UNATTENDED. ALWAYS KEEP CHILD IN VIEW WHILE IN STROLLER.
• AVOID SERIOUS INJURY FROM FALLING OR SLIDING OUT. ALWAYS USE SEAT BELT. AFTER
FASTENING BUCKLES, ADJUST BELTS TO GET A SNUG T AROUND YOUR CHILD.
• AVOID FINGER ENTRAPMENT: USE CARE WHEN FOLDING AND UNFOLDING THE STROLLER.
BE CERTAIN THE STROLLER IS FULLY ERECTED AND LATCHED BEFORE ALLOWING YOUR
CHILD NEAR THE STROLLER.
• NEVER USE STROLLER ON STAIRS OR ESCALATORS. YOU MAY SUDDENLY LOSE CONTROL
OF THE STROLLER OR YOUR CHILD MAY FALL OUT. ALSO, USE EXTRA CARE WHEN GOING
UP OR DOWN A STEP OR CURB.
• AVOID STRANGULATION.
• DO NOT PLACE ITEMS WITH A STRING AROUND YOUR CHILD’S NECK, SUSPEND STRINGS
FROM THIS PRODUCT, OR ATTACH STRINGS TO TOYS.
• USE OF THE STROLLER WITH A CHILD WEIGHING MORE THAN 45 LB (20.5 KG) OR TALLER
THAN 37.8 IN (96CM) WILL CAUSE A HAZARDOUS UNSTABLE CONDITION TO EXIST. USE THE
STROLLER WITH ONLY ONE CHILD AT A TIME.
• TO PREVENT A HAZARDOUS, UNSTABLE CONDITION, NEVER PLACE PURSES, SHOPPING
BAGS, PARCELS OR ACCESSORY ITEMS ON THE HANDLE (OTHER THAN APPROVED
STROLLER BAGS). NEVER PLACE ANYTHING ON THE CANOPY.
• TO PREVENT A HAZARDOUS, UNSTABLE CONDITION, DO NOT PLACE MORE THAN 10 LB (4.5
KG) TOTAL IN THE STORAGE BASKET INCLUDING THE 2 LB (1 KG) IN THE BASKET
POCKET.(IF SUPPLIED)
• TO AVOID BURNS, NEVER PUT HOT LIQUIDS IN THE CUP HOLDERS.(IF SUPPLIED)
• TO PREVENT TIPPING, DO NOT PLACE MORE THAN 3 LB (1.36 KG) TOTAL IN THE
CUPHOLDERS/SNACK TRAY.
• DO NOT USE STORAGE BASKET AS A CHILD CARRIER.
• DO NOT ALLOW YOUR CHILD TO STAND ON THE BASKET. IT MAY COLLAPSE AND CAUSE
INJURY.
• NEVER PLACE CHILD IN THE STROLLER WITH HEAD TOWARD FOOTREST.
• NEVER ALLOW YOUR STROLLER TO BE USED AS A TOY.
• DISCONTINUE USING YOUR STROLLER SHOULD IT BECOME DAMAGED OR BROKEN.
• STROLLER TO BE USED ONLY AT WALKING SPEED PRODUCT NOT INTENDED FOR USE
WHILE JOGGING, SKATING, ETC.
• CAREGIVER MUST ALWAYS HELP CHILD GET INTO AND OUT OF THE STROLLER.
• NEVER LEAVE YOUR CHILD UNATTENDED IN THE STROLLER/RIDER. FIVE POINT SAFETY
HARNESS SHOULD BE KEPT ON AT ALL TIMES WHEN A BABY/CHILD IS IN THE
STROLLER/RIDER. NEVER HANG A SHOPPING BAG, PURSE, DIAPER BAG OR ANY OTHER
BAG TO THE HANDLE OF THE STROLLER/RIDER. ADDITIONAL WEIGHT ON THE HANDLE
COULD TIP THE STROLLER OR A BABY/CHILD COULD GET ENTANGLED BY A STRAP
CAUSING SUFFOCATION OR INJURY. PLEASE FOLLOW ALL SAFETY PROTOCOLS WHILE
USING THIS PRODUCT.
4www.evolurbaby.com/help
WARNINGS (cont.)
• THE STROLLER IS DESIGNED FOR USE ON FLAT OR GENTLY SLOPING SURFACES, AND MAY
BE UNSTABLE ON HIGHER SLOPING AND UNEVEN SURFACES AND USERS SHOULD BE
AWARE OF THE POSSIBILITY OF THE STROLLER ROLLING AWAY OR TIPPING OVER.
• WITH YOUR HAND THROUGH THE WRIST TETHER STRAP LOOP, PUSH THE STROLLER
HOLDING BOTH HANDLES.
• THE FRONT WHEELS MAY WOBBLE OR OSCILLATE WHEN WALKING FAST.
• THE STROLLER CAN BE TAKEN UP CURB BY EITHER PRESSING DOWN ON THE HANDLES
AND RAISING THE FRONT WHEELS AND MOUNTING THE CURB OR TURNING THE STROLLER
AROUND AND PULLING THE STROLLER UP THE CURB.
• CAUTION IS REQUIRED WHEN PUSHING THE STROLLER ACROSS STEEP SLOPES OR
UNEVEN SURFACES THIS MAY CAUSE STROLLER TO BECOME UNSTABLE AND FALL OVER.
ALWAYS HOLD THE HANDLES FIRMLY.
• DO NOT RUN WITH THE STROLLER.
• WHENEVER YOU STOP, ALWAYS APPLY THE BRAKES BEFORE YOU LEAVE THE STROLLER.
• DO NOT HANG BAGS OR GOODS FROM THE HANDLE AS THIS COULD CAUSE THE STROLLER
TO TIP OVER.
• THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR A CHILD UNDER 6 MONTHS OLD.
12° or less more than 12°
X
5
www.evolurbaby.com/help
PARTS
If there are any missing parts, please contact Evolur before using the product.
Connecter
Guard Rail
Front Wheel
L & R
Rear Wheel
L & R
Brake Rail
Canopy
Shoulder
Strap
T-BarFrame Head Support
Guard Rail
Guard Rail
Support
Guard Rail
Housing
Seat Back
Seat
Front Wheels
Join-Point
Head Support
Brakes
Storage Latch
2nd Lock
Harness
Handle
Adjust Button
Handle Tube
Rear Wheel
Folding Lock
D-Ring
6www.evolurbaby.com/help
1
RIDER ASSEMBLY
J
I
1. Open the storage latch (figure A) and lift
up the handle of the rider until it stands
erect, clicking into place (figure B).
Next, pull up on the handle to extend it
(figures C and D). Note: each time you
open the rider, ensure that it is
completely latched.
2. Front Wheels: Slide each Front Wheel
onto the mounting post at the front of
the rider until they click into place
(figure E). To remove the Front Wheel,
push the release button as shown in
(figure F).
3. Rear Wheels: Put the Brake Rail into the
left Rear Wheel until it clicks into place
(figure G). Next, slide the left Rear
Wheel into the wheel mount until it
clicks into place (figure H). Next, mount
the right Rear Wheel and slide the Brake
Rail into the right Rear Wheel at the
same time (figure I).
Note:
• Tug on the front and rear wheels to
ensure that they are secure. To remove
the Rear Wheels, release the pin lock as
shown in (figure J).
7
www.evolurbaby.com/help
1
RIDER ASSEMBLY (cont.)
4. To open up the seat, release the rotary
button and simultaneously adjust the button
to pull up the seat back (Figure A).
5. Support into the top of the seat back until it
clicks into place (Figure B). To remove the
Head Support, press the release button and
release it (Figure C).
6. Guard Rail:
• Put the Guard Rail Housing into the Seat
until it clicks into place ( Figure D). Attach
the Guard Rail to the Seat Back (Figure E).
• To detach the Guard Rail, push the release
button under Guard Rail Housing and pull
out Guard Rail from Seat (Figure G).
• Pull the release buttons on the side of the
Seat Back to remove the Guard Rail (Figure
H).
Release
Button
H
F
E
G
The rotary button
The adjust
button
8www.evolurbaby.com/help
2
FOLDING THE RIDER
1. Press the Handle Adjust Button and push
the handle downward (figures A & B).
2. Press the rotary button and the adjust
button behind the seat back and proceed to
fold the Seat Back down (figure C & D).
3. Press and hold the Folding Lock and pull
the 2nd Lock upward to fold the rider
(figures E and F). Next, allow the rider to
drop and fold automatically (figures G & H).
Folding
Lock
2nd
Lock
The rotary
button
The adjust
button
9
www.evolurbaby.com/help
3
USING THE HARNESS
WARNING:
• USE THE HARNESS AT ALL TIMES.
• When not in use, disconnect shoulder straps
fromthe waist strap and buckle to prevent
trangulation.A five point harness is provided
to restrain your child. Buckletongues
separate for added safety. To econnect
buckletongues and to secure the child in the
harness, please followthe steps below
carefully.
1. Slide the shoulder strap tongue (1) into the
top of the waist buckle tongue (2) on both
sides.
2. Push both buckle tongues (1+2) into the
buckle housing (3) until the buckle tongues
click into place.
3. You can tighten or loosen the crotch straps
by sliding the bar sliders. The waist strap
and harness needs to fit firmly around the
child.
4. To tighten or loosen the shoulder strap, hold
and lift the slider and then pull the harness
strap, to adjust to the desired fit. The waist
strap and harness needs to fit firmly around
child.
5. To release the buckle from the buckle
housing, squeeze the button on the buckle
housing (figure A and B).
A
B
C
10 www.evolurbaby.com/help
4
SECURING YOUR CHILD TO HARNESS
4. To tighten or loosen the shoulder strap,
hold and lift the slider and then pull the
harness strap, to adjust to the desired fit.
The waist strap and harness needs to fit
firmly around child.
5. To release the buckle from the buckle
housing, squeeze the button on the buckle
housing (figure A and B).
Table des matières
Langues :
Autres manuels Evolur Poussette
