EVOLT ME 250 Manuel utilisateur
www.evoltadventure.com
ME 250
250W MAX POWER
ELECTRIC Mini Bike
8
Mini Bike
This operator's manual contains important safety information and
maintenance information. Read it carefully before using this vehicle.
Failing to follow the warnings contained in this operator's manual could
result in INJURY or DEATH。
Keep this manual in a safe place. It is very important that this
owner's manual be reviewed by any rider and it should remain with the
vehicle when transferred to a new owner.
All information images and specifications contained in this manual
are based on the latest product information available at the time of
publication. Due to improvements or production changes, there could
be discrepancies in this manual. E-Volt reserves the right to make
product changes at any time, without notice and without obligation to
make the same or similar changes to any vehicle previously built or sold
DO NOT OPERARE THIS VEHICLE ON PUBLIC ROADWAYS or
any location where there is vehicular traffic. Doing so would be very
dangerous and could also be in violation of local traffic laws and
restrictions. Always wear a helmet and protective eyewear and clothing.
No part of this owner's manual may be reproduced or copied
without express written permission from E-Volt.
Essential Technical Parameters
1. Vehicle
1.1
1.2
1.3
Dry mass (Net Weight):22kg(48lbs);
Gross mass (Gross Weight):25kg(55lbs);
Maximum load(weight): 45kg (100lbs);
2. Motor
2.1 Type: DC, with brush;
2.2 Rated continuous output power: P=250W;
2.3 Rated speed:2750 士7.5%rpm;
2.4 Rated voltage:24V;
2.5 Rated output torque: 1.21 (N.m)
3. Controls
3.1 Rated input voltage:24V;
3.2 Input voltage range:20~28V;
3.3 Input current without load: ≤115MA,
3.4 Max. output current of the motor: 30 士1A;
3.5 Under-voltage protection(Volt): 20 士0.5V;
3.6 Max. conduction value: ≤95% (with the output current of the
control <2A);
3.7 Starting voltage of handlebars: ≥ 1.4V;
3.8 Protection voltage of the handlebars: ≤1.8V;
4. Charger
4.1 Input: 100-240 VAC, frequency 50/60 Hz, input current: 1.8A Max.,
4.2 Out put: 24V DC 1.5A
5. Batteries
5.1 Size: 151 *65*96(100) mm;
5.2 Type: Lead Acid Battery, 2 X 12V ,9AH
CONTENTS
Names of all structural components……………………..1
Introduction……………………………………………………..2
Safety……………………………………………………………...3-5
Initial Setup……..………………………………………………6-8
Operating Controls………………………………………….9-10
Before You Ride……………………………………………..11-12
Basic Operation……………………………………………..13-14
2-Stage Safety Speed Limiter………………………..15
Maintenance &…………………………………………..…..16-21
Troubleshooting Guide…………………………………..22-23
ME250 Product Registration……… ………..…..24
Names of all structural components
Thanks for your choosing the ME250 Electric Powered Mini Bike!
The ME250 mini bike was designed as a recreational vehicle for off-
road use only and by a single rider only. This mini bike is built for
younger riders who are under 100 lbs. with minimal experience
Before riding, please take your time to get acquainted with your
mini bike and how it works. To protect your investment, we urge you to
keep it well maintained. In addition to regular maintenance, it is
important to observe and perform all pre-ride and periodic checks
outlined in this manual, where you will also find helpful safety
information, instructions and helpful tips. Keep the manual well to refer
to later on as questions may come up
As you read through this manual you will find information that is
noted with a NOTICE symbol. This is to point out key bits of information
that will help you avoid damage to your mini bike and property around
you. This manual covers basic maintenance procedures as well
Read the warranty page careful so that you understand your rights
and responsibilities
Whenever you ride, tread lightly by staying on established trails
and in approved areas. Protect the environment and keep off-road
riding areas open for future use.
Your personal safety and the safety of those around you is our
primary concern Operating this mini bike safely is an important
responsibility and should not be taken lightly
We have provided you with safe operating procedures; warning
labels on your mini bike and in this manual. This information will alert
you to potential hazards that could harm you or others.
It is understood that it is not practical or possible to warn you about
all possible hazards associated with off-road riding and maintaining
your mini bike. You must always use your own best judgement.
Safety information is presented in a variety of forms, including:
Safety labels and tags on the mini bike.
Safety messages proceeded by a safety symbol and one of these
three signal words: DANGER, WARNING and CAUTION.
DANGER WARNING CAUTION
Any of the above labels can indicate a danger where you or
someone around you can be KILLED or SERIOUSLY INJURED if the
instructions that it accompanies are not followed carefully.
This manual is filled with important safety information, please read
it carefully and be sure that you understand it.
Safety is our number one priority. There is an inherent level of risk
when using any motorized powersports product and an electric mini
bike is no different. Read the following warnings carefully to understand
how you can avoid injury to yourself, others and your ME250.
RULE NUMBER 1 DANGER
READ THIS BOOK COMPLETELY BEFORE RIDING THE FIRST TIME
There is valuable and important information in this user guide that
will keep you safe and protect your mini bike from becoming damaged
from neglect. Read it carefully and understand the contents. If you have
any questions please call the dealer.
RULE NUMBER 2 DANGER
PARENTAL SUPERVISION REQUIRED.
An electric power sport product is not a toy. A child can not be left
alone to play with this product. Any rider under the age of 8 should not
ride this mini bike and all children must have parental supervision when
riding. The age of 8 is only an estimate as it is affected by weight, height
and riding ability. A parents' decision to allow their child to ride this mini
bike should be based on their child's level of maturity and motor skills
RULE NUMBER 3 DANGER
RIDE AT YOUR OWN RISK AND USE COMMON SENSE.
Any mishap while using a power sports product can result in
serious injury or death Avoid situations where you can't see what is in
front of you or behind you, where other traffic is present and/or where
your speed is too fast for the conditions. Always ride within your own
limitations. Always obey local laws and regulations in your area Do not
ride your mini bike where such vehicles are prohibited
RULE NUMBER 4 DANGER
NEVER RIDE ON PUBLIC ROADWAYS
This minibike is designed for off-road use only. Never ride in
roadways or near any motor vehicles.
RULE NUMBER 5 DANGER
RIDE SMART
Never attempt to carry a passenger. Keep both hands on the
handlebars at all times Never ride while wearing headphones, earbuds,
or while using a cell phone. Keep fingers and other body parts away
from moving parts like the drive chain and sprocket as injuries may
result. Never attempt to jump off of a ramp or near stairs. Never use
near a pool or near spraying water. Always wear proper riding attire
including gloves, knee pads, sturdy shoes, a properly fitting DOT
approved helmet and goggles. Keep loose clothing and shoelaces away
from moving parts like the drive chain and sprockets.
FAILURE TO ADHERE TO THE ABOVE RULES AND CAUTIONS
COULD RESULT IN SERIOUS PERSONAL INJURY OR DEATH. USE
WITH CAUTION, BE AWARE OF YOUR SURROUNDINGS AND
PRACTICE SAFE RIDING TECHNIQUES.
If you have determined that your child is ready to ride please
remember the following points:
•Never let your child ride without a helmet
•Your child's safety is your responsibility. Do not take it lightly
•Never push you child to try things before they are ready
•Always supervise your child when they are riding
•Proper maintenance and upkeep of the mini bike is the key to safe
riding
DANGER PLEASE NOTE:
Any modifications or improper accessories added to the mini bike
with parts that are not manufactured by us can make it unsafe. We
strongly recommend that you do not remove any of the original
equipment or make any modifications that alter the design and/or
operation of the mini bike.
STEP 1. UNPACK YOUR ME250.The contents are as follows:
1. ME250 Electric Mini Bike
2. Tool Pouch with tools
3. Battery Charger
4. Owner's Manual
Once you have located all of these items, move on to step 2
STEP 2. ASSEMBLE THE HANDLEBARS. Your ME250 arrives
almost completely assembled, making it easy to start riding. The only
assembly that is required for your ME250 is to attach the adjustable
handlebars And front trim pieces. All cables and controls are already
hooked up to the bike, so attaching the handlebars is easy
REQUIRED TOOLS
10-13mm open wrench
6mm Allen key
1.Using the
10-13mm open wrench
from your tool kit, Put the
handlebar mounting bolt (M8×25) into the frame mounting hole
and tighten the (M8) nut with a 10-13 open end wrench
Table des matières
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur