Evolis Elypso Manuel utilisateur

ELYPSO

USER GUIDE

Réf. KU-ELY1-036-ENG Rev.C1

ELYPSO

Users must observe the copyright regulations applicable in their country. This manual must not be photocopied, translated, reproduced or transmitted,

in whole or in part, for any reason and by any electronic or mechanical means whatsoever without the express written

consent of the Evolis company.

All the information contained in this document is subject to change without prior notice.

Evolis cannot be held liable for any errors that may be found in this manual, or for any loss or damage arising accidentally or as a result of dissemination

or use of this manual.

TRADEMARKS

, Evolis Premium Suite®and Evolis High Trust®are trademarks of Evolis. All other trademarks belong to their respective holders.

WARRANTY

Refer to the warranty notice supplied with your printer for warranty terms and conditions and limitations.

ENVIRONMENTAL INFORMATION

Evolis is committed to helping the environment by reducing the energy consumption of its products.

RECYCLING OF END-OF-LIFE PRODUCTS

The manufacture of the equipment that you have purchased required the extraction and use of natural resources. It may contain materials that are

hazardous to health and the environment.

To prevent the dispersal of such materials into our environment and reduce the pressure on our natural resources, we recommend that you use

existing collection systems. These systems will appropriately re-use or recycle most of the materials in your end-of-life equipment.

The crossed-out dustbin symbol on your device is a reminder to use these systems.

If you need further information on collection, re-use and recycling systems, contact your local or regional waste management body.

Do not hesitate to contact us to find out more by visiting our website at www.evolis.com or by emailing the following address: info@evolis.com.

ELYPSO

Information providing further details or depth about certain points in the main text.

Indicates that failing to take the recommended action is liable to damage your printer.

This symbol indicates that a video showing the procedure is available on the www.evolis.com website and clicking on it takes you

straight to on-line help.

This symbol links to Evolis Print Center, accessible from your computer, which you can use to administer and manage you printer and

change its settings.

NOTE

EPC

ABOUT YOUR NEW PRINTER

Thank you for choosing an Evolis printer.

Using your new printer, you will be able to create a wide variety of high-quality cards and badges which can be printed in various thicknesses, colours

and styles. This printer uses consumables and accessories available from Evolis. For further details, visit our website at www.evolis.com

WARRANTY REGISTRATION

Please register on line at www.evolis.com to receive our special offers and general information.

Once on the website, click on Drivers and Support then on Register your printer and fill in all the fields, giving in particular the model and serial

number found on your printer.

GETTING STARTED

The purpose of this user guide is to guide you, step by step, through your printer and how it works. Take some time to read it in order to better

understand your printer and its features, and to save time during installation and use.

As with all Evolis products, a great deal of care has been taken over this manual. Should you find an error, however, please let us know by emailing

us at info@evolis.com.

CONTENTS

The bookmarks found top left of your screen can be used to navigate between the various sections in this user guide.

Carefully read this manual.

ICONS

The following icons are used in this manual to highlight important information:

ELYPSO

You will be asked for the full original packaging (outer box, inner wedges and protective bags) in the event that the printer is returned.

If the printer is returned without its original packaging and components are damaged in transit, these components will no longer be

covered by the warranty. You will be charged for new packaging for shipping the printer back to you.

If any of these components is missing, please contact your Evolis dealer. Use only the power supply unit supplied with your Evolis

printer.

CWT type KPL-065M-VI.

Use only the USB cable supplied with your Evolis printer.

The Evolis printer must be placed in a dry location, protected from dust and draughts but well-ventilated. Take care to keep your

printer on a flat, sturdy surface able to bear its weight.

1 - GETTING STARTED

UNPACKING

Your printer is supplied with several accessories that we ask you to look at closely.

This list may vary depending on your location.

The printer is shipped in special packaging designed to prevent any damage in transit. If you notice any visible damage, do not hesitate to contact the shipper

and immediately inform your Evolis dealer, who will tell you the procedure to follow.

Evolis takes great care over the quality of its packaging and we ask that you keep this packaging somewhere clean and dry.

Accessories supplied with your printer:

∙ Power supply unit - CWT type KPL-065M-VI.

∙ Mains power cable.

∙ USB cable.

∙ Reject box optional.

∙ Installation, documentation and software CD-ROM.

∙ Starter cleaning kit.

∙ Warranty notice.

NOTE

ELYPSO

DESCRIPTION OF THE PRINTER AND ITS FUNCTIONS

A- Manual card feeder

B- Control panel

C- USB connector (type A)

D- USB connector (type B)

E- Ethernet connector

F- Power cable socket

G- Place for Kensington lock

H- Pre-cut slot for the optional reject

tray

Pushbutton

Cards and ribbon

Cleaning

Printer

Wi-Fi (option)

ELYPSO

Access to the side panels of the machine and the option module fitting/removal areas is restricted to your retailer/installer or to

experienced users. The machine should always be disconnected from the power supply (unplugged) before carrying out any work on it.

Look at the getting started video described in the following section.

I- Thermal print head

J - Cleaning roller

K - Side panel opening mechanism

L - Place for the activation key for the flip-over module

M - Dust filter

N - Serial number label

ELYPSO

Under no circumstances should you connect the USB data cable before installation of the printer driver is complete.

To save energy, the printer will automatically switch itself to standby mode after 10 minutes of inactivity. The printer switches to

hibernation mode after 30 minutes in standby mode.

The standby times can be configured in the Evolis Print Center. In standard standby mode, sending a print request restarts the printer

and quickly pressing (for 1 second) on the button exits the printer from hibernation mode.

Before attempting any maintenance, ensure that the power cable is always unplugged. For your personal safety, ensure that the cable

and power supply unit remain easy to access, especially in the event of an emergency.

INSTALLATION

Connecting the printer

Connection to the power supply

Refer to the section on printer driver installation for further details, and follow the instructions carefully.

∙Connect the power cable to the power supply unit, then plug the power supply unit connector into the

printer.

∙Next, plug the end of the power cable into an earthed power socket.

∙The printer is powered on: the control panel lights up showing the printer is working properly. If the control

panel does not light, then either installation has not been carried out correctly or the printer is not working

properly. Check the installation.

The printer must be connected to a properly protected and earthed electrical installation.

FI: Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan.

NO: Apparatet må tilkoples jordet stikkontakt.

SE: Apparaten skall anslutas till jordat uttag.

DK: Printeren skal tilsluttes til en korrekt beskyttet og jordforbundet el-installtion.

Connecting the USB cable

NOTE

ELYPSO

The printer automatically recognises the ribbon inserted.

Insert the ribbon as shown.

Ribbons

Evolis original High Trust®ribbons optimise your printer’s operation and avoid causing damage to it. The use of ribbons from other suppliers is liable

to damage your printer and voids the manufacturer’s warranty for the printer.

For optimum print quality, Evolis recommends that the printer is fully cleaned every time the ribbon is changed. See the Servicing and Maintenance

section of this manual.

Fitting the ribbon

Open the cover. Close the cover and press until a

click is heard.

NOTE

ELYPSO

For optimum quality, the cards used must be ISO 7810 certified.

Use only the card types recommended by Evolis.

Do not touch the printable surface of the cards in order to preserve print quality.

Do not use cards that have been damaged, folded, embossed or dropped on the floor.

Keep your cards protected from dust.

Cards

After starting your print task, insert card into the

manual feeder. Ensure the cards are positioned as

illustrated in the diagram.

NOTE

Loading the cards

ELYPSO

Removing printed cards

Once the print cycle is complete, the card is delivered by the manual feeder.

Managing the reject box

The printer is fitted with a removable optional reject box which is positioned behind it.

The reject box can hold 30 cards (0.76mm - 30mil).

To empty it, just remove the cards in it.

Evolis recommends that you empty this box regularly.

Adjusting card thickness

The printer accepts cards between 0.50 mm and 1.25 mm thick (20 to 50 mil).

The printed card can be programmed in Evolis Print Center to be ejected either from the manual feeder or the reject tray if you choose

the option.

EPC

Autres manuels pour Elypso

Table des matières

Autres manuels Evolis Imprimante

Evolis

Evolis Pebble Manuel de l'opérateur

Evolis

Evolis Avansia Manuel utilisateur

Evolis

Evolis Primacy Manuel utilisateur

Evolis

Evolis KC PRIME Manuel utilisateur

Evolis

Evolis Tattoo Manuel utilisateur

Evolis

Evolis A5405 Manuel utilisateur

Evolis

Evolis AGILIA Manuel utilisateur

Evolis

Evolis KC ESSENTIAL Manuel utilisateur

Evolis

Evolis Zenius Manuel d'utilisation et d'entretien

Evolis

Evolis Tattoo 2 Manuel utilisateur

Evolis

Evolis KU10E Manuel utilisateur

Evolis

Evolis Tattoo Manuel de l'opérateur

Evolis

Evolis Pebble Manuel utilisateur

Evolis

Evolis Unitech Securion Manuel utilisateur

Evolis

Evolis EDIKIO ACCESS Manuel utilisateur

Evolis

Evolis KM500B Manuel utilisateur

Evolis

Evolis Dualys Manuel utilisateur

Evolis

Evolis TattooRW Manuel utilisateur

Evolis

Evolis Avansia Manuel utilisateur

Evolis

Evolis QUANTUM Manuel utilisateur

Evolis

Evolis Primacy Manuel utilisateur

Evolis

Evolis New Pebble Manuel utilisateur

Evolis

Evolis Dualys Manuel utilisateur

Evolis

Evolis Avansia Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur