34
DISCLAIMER AND WARNINGDISCLAIMER AND WARNING
Battery Safety Guidelines
1. Prevent the baeries from coming into contact with any kind of liquid. Do not leave baeries out in the
rain or near a source of moisture. Do not drop the baeries into water. If the inside of the baery comes in
contact with water, chemical decomposion may occur, potenally resulng in the baery catching on fire,
and may even lead to an explosion.
2. If the baery falls into water with the stabilizer during use, take it out immediately and put it in a safe and
open area. Maintain a safe distance from the baery unl it is completly dry. Never use the baery again, and
dispose of the baery properly as described in the Baery Disposal secon below.
3. If the baery catches fire, use water, water spray, sand, fire blanket, dry powder, or carbon dioxide fire
exnguisher immediately to put out the fire. Please exnct the fire by applying the methods recommended
above according to the actual situaon.
4. Never use non-EVO Gimbals baeries. If replacement or backup is needed, please purchase new baeries
from EVO Gimbals' official website or authorized channels. EVO Gimbals takes no responsibility for any
damage caused by non-EVO Gimbals baeries.
5. Never use or charge swollen, leaky, or damaged baeries. Never use or charge if the baery smells, or
overheats (exceeding maximum temperature of 160°F / 71°C). If your baeries are abnormal, contact EVO
Gimbals for further assistance.
6. The baery should be used within the temperature range from -10° C to 50° C. Use the baery in
environments above 50° C can lead to a fire or explosion. Use of baery below - 10° C can lead to serious
baery damage.
7. Do not use the baery in strong electrostac or electromagnec environments. Otherwise, the baery
protecon board may malfuncon.
8. Do not disassemble or use any sharp object to puncture the baery in any way. Otherwise, the baery
may leak, catch fire or explode.
9. Do not mechanically strike, crush, or throw the baery. Do not place heavy objects on the baery or
charger.
10. Electrolytes inside the baery are highly corrosive. In case of accidental contact of any electrolytes with
your skin or eyes, rinse immediately with water for at least 15 minutes and seek medical advice as soon as
possible.
11. Do not use the baery if it has been involved in a crash or heavy impact.
12. Do not heat the baery and never put the baery in a microwave oven or in a pressurized container.
Warning
Read the ENTIRE User Guide to become familiar with the features of this product before operang. Failure to
operate the product correctly can result in damage to the product or personal property and cause serious
injury. This is a sophiscated product. It must be operated with cauon and common sense and requires
some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result in
injury or damage to the product or other property. This product is not intended for use by children without
direct adult supervision. DO NOT use with incompable components or in any way otherwise as menoned
or instructed in the product documents provided by EVO Gimbals. The safety guidelines herein contain
instrucons for safety, operaon and maintenance. It is essenal to read and follow all of the instrucons and
warnings in the User Guide, prior to assembly, setup or use, in order to operate the product correctly and
avoid damage or serious injury.
Safe Operation Guidlines
CAUTION:
1. The RAGE3 is a high-precision control device. Damage may be caused to The RAGE3 if it is dropped or
subject to external force, and this may result in malfuncon.
2. Make sure the rotaon of the gimbal axes is not blocked by external force when The RAGE3 is turned on.
3. The RAGE3 is not waterproof. Prevent contacts of any kind of liquid or cleaner with The RAGE3. It is
recommended to use dry cloth for cleaning.
4. Protect The RAGE3 from dust and sand during use.
WARNING:
To avoid fire, serious injury, and property damage, observe the following safety guidelines when using,
charging, or storing your baeries.