Everycom X7 Manuel utilisateur
Please read manual throughly before using and keep it for future reference.
TOLLFREE HELPDESK : 1800-121-4480
EVERYCOM X7 PROJECTOR
USER MANUAL
CONTENTS
Packing Content 01
Function Overview 03
Remote Overview 04
Precautions 02
Projection Distance & Size 05
Input Source 06
Quick Start 07
Projector Connection 08
Multimedia Menu 09
Specifications 13
Settings Of The Main Menu 08-10
Projector Installation Options 11-12
Troubleshooting Guide 14-15
Support @ 1800-121-4480
Remote User Manual
PACKING CONTENT
NOTICE
AV Cable Power Cable
Projector
Recommended Not Recommended
VOL+
CH+ 0
132
4 5 6
7 8 9
CH-
VOL-
SOURCE INFO
EXITMENU
ENTER
01
PRECAUTIONS
Support @ 1800-121-4480
1. Before use, please read the Instructions carefully.
2. To ensure stable power supply for the product, please use the power supply
circuit that meets national power consumption requirements and power
sockets that are provided with such protection means as grounding.
3. Please use the power supply indicated on the projector and power source
provided with the projector to supply power.
4. Do not remove the seal and unpack the projector by yourself, otherwise our
company will not assume the quality assurance service for free.
5. In order to avoid your eyes from being burnt, do not look directly at the
projector-camera when the projector is working.
6. Do not place the projector on such articles as wiping cloth and blanket that
may result in plugging of vents.
7. Do not spray or splash water on the product as it is not waterproof, and do
not place vase, water cup and other articles filled with liquid around the
product.
8. To prevent electric shock, do not make the product caught in the rain or
wetted.
9. Please turn the power off and unplug the power line if the product is idle for
a long time.
10. Please use the original foam and other vibration-proof materials to
transport the product.
11. Do not try to repair the product on your own when you find that it is has
been damaged. Please contact the distributor.
02
Serial
Number
Define Describe
1
2
3
4
5
6
7
8
9
10
11
12
13
14
FUNCTION OVERVIEW
on/off
up and down, Left and
Right
ok
menu
Signal source
focusing ring
Keystone Correction
VGA/Computer
HDMI
Compound video input
interface
3.5mm headphone jack
the USB interface
SD card
IR force control head
on/off
multi-function up and down,
left and right
function to confirm
menu display
source display
resolution adjustment
+15 adjustment picture keystone out alignment
Computer input or other VGA output devices
connect HDMI input or other HDMI output device
3-in-1 switching line access composite video
signal
headphone jack or active speaker jack
Connect the USB disk or move the hard disk/mouse
SD card slot
remote reception signal
15
16
17
Speaker Built In Speaker
Power input For main power connection
Air outlet For perfect airflow inside projector
6
1
2
2
2
2
3
5
4
7
8
910
11
12
13 14
15
16 17
18
18 D-TV interface To Connect D-TV Connections
19 Power LED
19
Support @ 1800-121-4480 03
For Standby Status
REMOTE OVERVIEW
Play / Pause
Up
On / Off
Left
Channel -
Volume-
Right
Volume+
Input Source
Down
Menu
Mute
Exit
VOL+
0
13
2
456
7 8 9
VOL-
SOURCE INFO
EXITMENU
ENTER
Screen
Channel +
Fast Forward
Fast Rewind
Numbers Keys
Stop
Enter/OK
CH+CH-
Support @ 1800-121-4480
04
3.85ft
(1.2m)
18.96ft
(3.8m)
32"
120"
The Recommended projection screen is around 85 inches with a projection distance of around 2 meter
Ambient darkness will improve the clarity of the projected images.
PROJECTOR CONNECTION
PROJECTION DISTANCE & SIZE
52
1
37
7
SET TOP BOX
The distance at which you place the projector from the screen determines the approximate size of the image.
The projection size increases when the projector is father from the screen.
Being too far or too close between the projector and the wall/screen, or the incorrect adjustment of the Note:
focus ring and Keystone may result in the poor image.
Support @ 1800-121-4480 05
Press button on the projector or remote to enter the interface of INPUT SOURCE.
B. USB / SD Connection
INPUT SOURCE
A. VGA Connection
C. HDMI Connection
ATV
PC - RGB
HDMI
AV
USB / SD
Input Source
ATV
PC - RGB
HDMI
AV
USB / SD
Input Source
ATV
PC - RGB
HDMI
AV
USB / SD
Input Source
OK
OK
OK
SET TOP BOX
Note: When the projector is connected with a computer, please convert the computer output
correspondingly in addition to the input conversion of the projector.
Support @ 1800-121-4480
06
QUICK START
1. STARTUP AND SHUTDOWN
* Connect the projector to the DC terminal of the power adapter, and then plug in the power adapter so that the projector is in standby status
when the power light of the projector is on.
Press the power key on the projector or the power key on the remote controller, so that the projector is started to enter workingSTARTUP:
status when the power light on the projector glitters;
Press the power key on the projector or the power key on the remote controller to shutdown the projector SHUTDOWN:
3. KEYSTONE CORRECTION
2. IMAGE FOCUSING
*This projector comes with 15°Keystone correction and focus function. Please kindly note, you may adjust the focus
wheel (located at front) and keystone correction ring (located at rear) simultaneously until to get crystal clear images
Support @ 1800-121-4480 07
PHOTO
USB 2.0
MUSIC MOVIE TEXT
MULTIMEDIA MENU
To play video, select 'MOVIE" to enter the next menu for selection:
To play music, select 'MUSIC' to enter the next menu for selection,
To play photo, select PHOTO" to enter the next menu for selection,
To play text. select 'TEXT' to enter the next menu for selection
After USB or SD signal channel is selected, the following operation interface will be generated
SETTING OF MAIN MENU
1.1 Image submenu
1.1.1 Operation of the remote controller
Press the key "MENU" on the remote controller to call out the main menu, then press the key " “ or “ " to enter the image submenu:
press the key “ “ or “ “ to select the items to be adjusted, and press the key "OK" to enter setting.
1.1.2 Operation of keys on the projector
Press the key "MENU" to call out the main menu, then press the key "V-” or "V+" to enter the image submenu: press the key "CH- or "CH+"
to select the items to be adjusted, and press the key "OK" to enter setting.
In the image menu, you can set the picture mode, color temperature, scaling pattern, noise reduction,
and flip front of the projector as well as the computer screen.
PICTURE
Picture Mode User
Color Temperat
Aspect Ratio
Noise Reduction
Screen
Flip
HDMI mode AV
Reduce Display
Support @ 1800-121-4480
08
Table des matières
Autres manuels Everycom Projecteur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
