Everlz 7707DT Manuel utilisateur

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Revision 1.8 Page - i

TABLE OF CONTENTS

1. OVERVIEW.......................................................................................................................................... 1

2. INSTALLATION................................................................................................................................... 3

2.1. OPTICAL CONNECTIONS......................................................................................................... 3

2.1.1. Single Fiber Versions...................................................................................................... 4

2.1.2. Standard Dual Fiber Version (-F2 version)...................................................................... 4

2.2. SIGNAL CONNECTIONS........................................................................................................... 5

2.2.1. Multi-Pin Terminal Block Installation............................................................................... 5

2.2.2. Serial Data Connections ................................................................................................. 7

2.2.3. LTC Connections ............................................................................................................ 8

2.2.4. GPIO Connections (7707DT-GPIO Versions Only)......................................................... 8

2.3. GENERAL PURPOSE INPUTS AND OUTPUTS....................................................................... 8

2.4. CARE AND HANDLING OF OPTICAL FIBER........................................................................... 9

2.4.1. Safety.............................................................................................................................. 9

2.4.2. Assembly......................................................................................................................... 9

2.4.3. Labeling......................................................................................................................... 10

2.4.4. Handling and Connecting Fibers................................................................................... 10

3. SPECIFICATIONS............................................................................................................................. 11

3.1. RS-422/485 SERIAL DATA...................................................................................................... 11

3.2. RS-232 SERIAL DATA............................................................................................................. 11

3.3. LTC DATA................................................................................................................................ 11

3.4. GENERAL PURPOSE INPUTS (7707DT-GPIO ONLY)........................................................... 11

3.5. GENERAL PURPOSE OUTPUTS (7707DT-GPIO ONLY)....................................................... 11

3.6. OPTICAL INPUT/OUTPUT.......................................................................................................12

3.7. ELECTRICAL ........................................................................................................................... 12

3.8. PHYSICAL................................................................................................................................ 12

4. CARD-EDGE MONITORING AND CONTROL ................................................................................. 13

4.1. STATUS INDICATOR LEDS.................................................................................................... 13

4.2. CARD-EDGE DISPLAY AND CONTROLS.............................................................................. 14

4.2.1. Card-Edge Display Warning Indications........................................................................ 16

4.2.2. Displaying the Optical Power........................................................................................ 16

4.2.3. Selecting the Signal Status Indication Mode................................................................. 16

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Page - ii Revision 1.8

4.2.4. Selecting the Serial Data Type...................................................................................... 18

4.2.5. Selecting the Serial Data Rate...................................................................................... 18

4.2.6. Selecting the Serial Data Termination........................................................................... 19

4.2.7. Selecting the Serial Data Failsafe Bias......................................................................... 20

4.3. CONNECTING RS422 DEVICES BETWEEN MASTER AND SLAVE .................................... 20

5. JUMPER CONTROLS....................................................................................................................... 21

5.1. SELECTING THE CARD ID ..................................................................................................... 21

5.2. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED

BY THE GLOBAL FRAME STATUS........................................................................................ 21

5.3. CONTROL JUMPER (No Longer Used) ................................................................................. 21

5.4. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES ............................................. 21

6. VISTALINK®REMOTE MONITORING/CONTROL........................................................................... 22

6.1. WHAT IS

ISTA

LINK®?............................................................................................................. 22

6.2.

ISTA

LINK®MONITORED PARAMETERS.............................................................................. 22

6.3.

ISTA

LINK®CONTROLLED PARAMETERS........................................................................... 23

6.4.

ISTA

LINK®TRAPS.................................................................................................................. 23

7. APPENDIX - MPK ROUTER CONTROL INTERFACE TO 7707DT ................................................. 24

7.1. OVERVIEW............................................................................................................................... 24

7.2. INTERFACE METHODS........................................................................................................... 26

7.2.1. MPK Interface to RS-422 .............................................................................................. 26

7.2.2. MPK Interface to RS-485 .............................................................................................. 29

7.3. TERMINATION AND FAILSAFE BIAS .................................................................................... 31

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Revision 1.8 Page - iii

Figures

Figure 1-1: 7707DT Block Diagram.......................................................................................................................2

Figure 2-1: 7707DT Rear Panels ..........................................................................................................................3

Figure 2-2: Terminal Block Wiring.........................................................................................................................5

Figure 2-3: 7707DT Terminal Block Signal Connections......................................................................................6

Figure 2-4: 7707DT-GPIO Terminal Block Signal Connections............................................................................7

Figure 2-5: General Purpose Inputs and Outputs.................................................................................................9

Figure 2-6: Reproduction of Laser Certification and Identification Label............................................................10

Figure 4-1: Location of Status Indicators and Jumpers ......................................................................................13

Figure 4-2: Card-edge Menu Quick Reference...................................................................................................15

Figure 7-1: RS-422 Interface Example................................................................................................................25

Figure 7-2: RS-485 Interface Example................................................................................................................25

Figure 7-3: MPK Interface Example....................................................................................................................25

Figure 7-4: MPK Interface to RS-422 - Correct Method......................................................................................26

Figure 7-5: MPK Interface to RS-422 - Incorrect Method ...................................................................................27

Figure 7-6: MPK Interface to RS-422..................................................................................................................28

Figure 7-7: MPK Interface to RS-485..................................................................................................................29

Figure 7-8: MPK Interface to RS-485..................................................................................................................30

Tables

Table 1-1: Typical Application Configurations.......................................................................................................2

Table 4-1: Connecting RS422 Signals Between Master & Slave .......................................................................20

Table 6-1: VistaLINK®Monitored Parameters.....................................................................................................22

Table 6-2: VistaLINK®Controlled Parameters ....................................................................................................23

Table 6-3: VistaLINK®Traps ...............................................................................................................................23

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Page - iv Revision 1.8

REVISION HISTORY

REVISION DESCRIPTION DATE

0.1 Preliminary version Jul 2003

1.0 First Official release - added info on CARD ID jumper for single fiber versions Aug 2003

1.1 Updated 7707DT-GPIO pinout and expanded descriptions for this option; Feb 2005

Updated Vistalink related items; Removed Local Fault jumper

1.2 Added Master/Slave RS422 configuration May 2005

1.3 Updated safety section and added assembly and labeling sections Aug 2005

1.4 Included terminal block installation diagram and Appendix-MPK Router Control Oct 2007

1.5 Updated rear plate diagram Jan 2008

1.6 Added GPO Common Pin note, moved section 5 into section 2.3,

general format clean up. Aug 2008

1.7 Added table format throughout section 4.2 Apr 2009

1.8 Added information to section 4.2.3 regarding DI, DO, & DIO indications. Apr 2010

Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for

the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of

Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered

by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.

Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is

granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.

Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,

please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or

specifications.

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Revision 1.8 Page - v

Never look directly into an optical fiber. Non-reversible damage to the eye can

occur in a matter of milliseconds.



Do not hook up the 7707DT DWDM cards directly with a short fiber optic

cable. The 7707DT DWDM cards produce +7dBm of power, which will

damage the receiver if connected directly.

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Page - vi Revision 1.8

This page left intentionally blank

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Revision 1.8 Page - 1

1. OVERVIEW

The 7707DT series Fiber Data Transceivers provide an economical method of transmitting multiple bi-

directional RS-232, RS-422, RS-485 data signals as well as Linear Time Code (LTC) over a single fiber

optic link. Another 7707DT Data Transceiver facilitates conversion back to RS-232, RS-422, RS-485 data

signals and LTC at the destination. The 7707DT-GPIO version provides additional channels of RS-232,

and General Purpose Input/Outputs (GPIO). A pair of 7707DT Data Transceivers permits bi-directional

data transmission over distances up to 50 Km, with minimum possible latency.

Two optical interface configurations allow the user to choose the optimal function /price /performance ratio

to suit a particular application. The standard configuration transmits and receives over a single fiber. The

dual fiber configuration is compatible with CWDM systems and is designed to transmit and receive over

separate fibers. The optical output of the 7707DT is available in 1310nm, 1550nm, or any one of up to

sixteen CWDM wavelengths.

Features:

•7707DT version transports four RS-422 or RS-485, three RS-232, and one LTC.

•7707DT-GPIO version transports four RS-422 or RS-485, eight RS-232, eight GPIO, one LTC.

•Selectable termination and failsafe bias settings for RS-422/485 data inputs.

•Selectable network timeouts for RS-485 accommodate twelve data rates.

•All configuration settings are controllable through the card-edge user interface, or VistaLINK®.

•Comprehensive signal and status monitoring via four-digit card-edge display, or VistaLINK®.

•Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths

(ITU-T G.694.2 compliant).

•DWDM wavelengths also available (ITU-T G.694.1 compliant).

•Compatible with multi-mode and single-mode fiber (dual fiber version).

•SC/PC, ST/PC, or FC/PC fiber connector options.

•Fully hot swappable from front of frame.

•VistaLINK®enabled for remote monitoring and control when installed in 7700FR-C frame with

7700FC VistaLINK®Frame Controller.

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Page - 2 Revision 1.8

Transmit Side Receive Side

Fiber Type Fiber

Links Optical/Link

Budget Ordering

Product Info TX

Power Ordering

Product Info RX

Sensitivity Description

Multi-Mode 2 < 3km 7707DT13-F2 -7dBm 7707DT13-F2 -28dBm 1310nm on Tx & Rx fibers

Single-Mode 2 21dB/50km 7707DT13-F2 -7dBm 7707DT13-F2 -28dBm 1310nm on Tx & Rx fibers

Single-Mode 1 14dB/30km* 7707DT13 -10dBm 7707DT13 -24dBm 1310nm, bi-directional, one fiber

Single-Mode 1(WDM) 25dB/60km 7707DT13M-W -1dBm 7707DT15-W -26dBm 1310nm/1550nm, WDM, bi-

directional on one fiber

Single-Mode 1(CWDM) 24dB/80km** 7707DTxx-F2 0dBm 7707DTyy-F2 -28dBm Different CWDM wavelengths on

Tx & Rx, with 8 channel CWDM

Mux/Demux**

Single-Mode 1(DWDM) 31dB/105km** 7707DTxxxx-F2 +7dBm 7707DTyyyy-F2 -28dBm Different DWDM wavelengths on

Tx & Rx, with 8 channel DWDM

Mux/Demux**

*With >20dB return loss on fiber Interface Tx Power/Rx Sensitivity are nominal values ±1dBm

**Assume 8 Ch Mux/Demux loss of 3.5dB Fiber Loss = 0.4/0.3dB per km @ 1310nm/1550nm

Table 1-1: Typical Application Configurations

CONTROL/

INDICATION

VistaLINK

Interface

LOCAL

CONTROL

LOCAL

INDICATION

4 RS-422/485

LTC

3 RS-232

(7707DT)

8 RS-232

(7707DT-GPIO)

4 RS-422/485

LTC

Optical

Receiver

Optical

Transmitter

Mux

Optical

Combiner

Fiber

Output

Fiber

Input/

Output

Fiber

Input

(Dual

Fiber -F2

Version)

(Single

Fiber

Version)

(Dual

Fiber -F2

Version)

8 GPI

(7707DT-GPIO)

8 GPO

(7707DT-GPIO)

TDM

Demux

3 RS-232

(7707DT)

8 RS-232

(7707DT-GPIO)

Figure 1-1: 7707DT Block Diagram

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Revision 1.8 Page - 3

2. INSTALLATION

The 7707DT series modules come with a companion rear plate that has multi-pin removable terminal

block connections, and an SC/PC (shown), ST/PC or FC/PC optical connector. For information on

mounting the rear plate and inserting the module into the frame see section 3 of the 7700FR chapter. The

following diagram shows four rear plate options.

Figure 2-1: 7707DT Rear Panels

2.1. OPTICAL CONNECTIONS

The 7707DT modules are designed to work with single-mode or multi-mode optical

fiber depending on the version ordered.

7700 MultiFrame Manual

7707DT RS-232/422/485 Fiber Data Transceiver

Page - 4 Revision 1.8

2.1.1. Single Fiber Versions

FIBER I/O: There is one SC/PC (shown), ST/PC or FC/PC female connector with the optical

input/output from the 7707DT. This connector should be connected to the matching

connector of a matching single fiber 7707DT module at the destination end with a suitable

fiber optic cable.

All single fiber versions of the 7707DT are designed to work with single-mode fiber optic

cable. Single fiber 7707DT and 7707DT-GPIO versions use 1310nm wavelengths. Single

fiber 7707DT-W and 7707DT-GPIO-W versions use 1310nm or 1550nm wavelengths and

have their associated transmit wavelength marked on the rear panel. Configuration of the

CARD ID jumper is required for single-fiber 7707DT and 7707DT-GPIO versions only. Refer

to section 5.1 for details about the CARD ID jumper.

2.1.2. Standard Dual Fiber Version (-F2 version)

FIBER IN: There is one SC/PC (shown), ST/PC or FC/PC female connector with the optical input to the

module. This connector should be connected to the FIBER OUT connector of a matching

dual fiber 7707DT-F2 module at the destination end with a suitable fiber optic cable. The

dual fiber 7707DT-F2 versions receive on wavelengths in the 1270 to 1610nm range

accommodating standard, CWDM or DWDM transmission schemes.

FIBER OUT: There is one SC/PC (shown), ST/PC or FC/PC female connectors with the optical output

from the module. This optical output is available in 1310nm, 1550nm, and up to sixteen

CWDM wavelengths (ITU-T G.694.2 compliant). This connector should be connected to the

FIBER IN connector of a matching dual fiber 7707DT-F2 module at the destination end with

a suitable fiber optic cable. The dual fiber 7707DT-F2 versions transmit on the wavelength

marked on the rear panel and are designed to work with either single-mode fiber optic cable.

The dual fiber 7707DT-F2 versions are compatible with multi-mode fiber when connected

directly to a companion 7707DT-F2 module.

Table des matières

Autres manuels Everlz Émetteur-récepteur

Everlz

Everlz 7707GPS-DR Manuel utilisateur

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Kenwood

Kenwood ProTalk TK-3201 Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Kenwood

Kenwood TK-3180 Manuel d'utilisation et d'entretien

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Kenwood

Kenwood TK-2217 Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Kenwood

Kenwood TS-590SG Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur