EverFocus VANGUARD 16x8H Plus Manuel utilisateur

VANGUARD 16x8H Plus

16CH, H.265, 4K Hybrid DVR

Quick Installation Guide

Release Date: March 2019

All the images including product pictures or screen shots in this document are for example only. The images may

vary depending on the product and software version. Information contained in this document is subject to

change without notice.

EverFocus Taiwan:

2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan

TEL: +886 2 26622338 FAX: +886 2 26623632 www.everfocus.com.tw marketing@everfocus.com.tw

1. Overview

1.1 Front Panel

1 2 3

No.

Name

Description

1 LED Indicator

Power: When power is on, the LED will continue lighting in green.

HDD: When power is on, the LED will continue lighting in red. When HDD

is reading/writing data, the LED will flashes red.

2 IR Receiver Receiver for signals from the IR remote control.

USB2.0 Port

USB2.0 port for connecting to a mouse or an external storage device.

1.2 Rear Panel

1 2

8 9 10 11 12

3 4 5 6

Name

Description

1 Audio Input

Connects to audio input devices, such as microphones. Note that the

microphones with a (built-in) amplifier and external power supply are

required.

2 Loop Video

Output 1~16

You can also optionally connect the monitors to each Loop Video Output

to display the video of the corresponding channel.

3 Audio Output

Connects to an audio output device, such as speakers. Note that the

speakers with a (built-in) amplifier and external power supply are

required.

4 VGA Port Connects to a monitor using a VGA cable.

Terminal

Block

The Terminal Block provides 16 alarm inputs, 1 alarm output and RS-485

connection (see 3.1 Terminal Block).

6 e-SATA Connects to an external e-SATA storage device.

7 Video Input Connects the AHD/TVI/SD cameras to the Video Input.

8 HDMI Port Connects to a monitor using a HDMI cable.

9 LAN Connects to the Network.

10 USB2.0 Port The USB2.0 port for connecting to a mouse or external storage device.

11 Power Port Connects to a 12VDC power source.

12 Power Switch Press to turn on or off the power.

1.3 Dimensions

430mm / 16.93"

79.5mm/3.13"

399.3mm / 15.72"

1.4 Packing List

•

DVR x 1

•Power Cord x 1

•Mouse x 1

•HDD Bracket x 4

•Screw Pack x 1 (Sliver Screw x 16, Washer

Head Screw x 8, M3 (φ6.8) Screw x 4)

•Quick Installation Guide x 1

•Rack Ear x 2

•CD x 1 (Please see Note 3.)

•IR Remote Control x 1 (with two AAA

batteries) *Please see Note 4.

Note:

1. Equipment configurations and supplied accessories vary by country. Please consult your

local EverFocus office or agents for more information. Please also keep the shipping carton

for possible future use.

2. Contact the shipper if any items appear to have been damaged in the shipping process.

3. The CD contains the IP Utility software, User Manual and Quick Installation Guide.

4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions.

a. Use only two AAA dry cell batteries.

b. Do not dispose of the batteries in a fire as it may explode.

2. Basic Installation

2.1 Hard Disk Installation

You can install up to four 3.5” HDDs. The maximum capacity of each HDD is 8TB.

1. Make sure the DVR is power-off. Unscrew the ten housing screws on the DVR, and remove

the housing cover from the DVR.

2. Find the SATA cable inside the DVR, and connect the SATA cable to the SATA port on the HDD

(left image). Find the internal power cable, and connect the internal power cable to the HDD

(right image).

3. Place the HDDs inside the DVR, screw the HDDs from the bottom side of the DVR using the

supplied Screws. After installing the HDDs, screw the housing cover back to the DVR.

2.2 Hard Disk Compatibility List

Please go to the product page (Download) on EverFocus’ Website www.everfocus.com.tw to see

the latest Storage Compatibility List. It’s recommended to use the hard disk models listed on the

Storage Compatibility List to ensure your hard disks are compatible.

Note: If using two or more hard disks, please choose the hard disks with the same capacity.

2.3 Rack Mount

To install rack ears on the DVR:

1. Unscrew the four M3 (φ6.8) screws on both side of the DVR.

2. Use the supplied two rack ears and the above screws for rack mount installation on both side.

3. Basic Connection

Mouse

Power

supply

Line Level

Audio Out

IP Camera

Camera 1~16

Line Level

Audio Input

Monitor

(HDMI / VGA)

Web Remote

Client

VANGUARD

CMS

3.5" HDD

Network

1. To record videos, install 3.5” HDD(s) to the DVR. Please refer to 2.1 Hard Disk Installation.

2. Connect the TVI/AHD/SD cameras to the BNC ports.

3. Connect microphones to the audio input ports to transmit audio from the camera to the DVR.

Note that the microphones with a (built-in) amplifier and external power supply are

required.

4. To view videos at local site, connect a monitor to the HDMI or VGA port using the HDMI or

VGA cable supplied by the monitor manufacturer.

5. To listen to the audio from device side, connect speakers to the audio output. Note that the

speakers with a (built-in) amplifier and external power supply are required.

6. Use a standard RJ-45 CAT5 Ethernet cable to connect the DVR to the network and then

optionally connect IP cameras to the DVR.

7. Optionally connect a mouse to the DVR to control the system. You can also control the

system using the supplied IR Remote Control).

8. Use the supplied Power Cord and Adaptor to connect the DVR to the power outlet.

3.1 Terminal Block

VANGUARD 16x8 Plus provides 16 alarm inputs, 1 alarm output and 1 RS-485.

4. Turning On / Off the Power

Before powering on the DVR, please make sure the internal HDD have been installed properly.

Once you have completed the basic cable connections, you are ready to turn on the DVR.

Simply plug in the power source and then press the Power Switch on the rear panel of the DVR.

The POWER LED will light up if power is normal and the DVR will enter the System Initialization

process.

When the process is done, it’s required to set up a password for the administrator account

immediately in order to protect your privacy.

To turn off the power, click the Shutdown button on the Exit page (OSD menu > Exit >

Shutdown) and then press the Power Switch on the rear panel of the DVR.

5. P2P Function

The P2P function allows users to add DVRs to the eFVMS App through QR code.

1. Install EverFocus eFVMS App. For Android users, go to Google Play Store. For iOS users, go to

Apple Store. After the installation process is complete, start eFVMS App.

EverFocus eFVMS eFVMS by EverFocus

2. To add a DVR through P2P, tap Menu > Device List, and then tap the “+” button on the

upper-right corner.

3. Scan the DVR’s QR code on the System Info page of the DVR OSD menu. Input the DVR ID,

password and Media Port 8000. Tap the Save button.

……

4. The DVR is now added and connected to the App. You can start accessing the DVR.

P/N: 4605VAN1602004B

Autres manuels pour VANGUARD 16x8H Plus

Table des matières

Autres manuels EverFocus DVR

EverFocus

EverFocus ENR 400 Manuel utilisateur

EverFocus

EverFocus DVR-100H Manuel utilisateur

EverFocus

EverFocus EDVR16D1/250 Manuel utilisateur

EverFocus

EverFocus EDSR 400F Manuel utilisateur

EverFocus

EverFocus NVR8008X Manuel utilisateur

EverFocus

EverFocus EDR410M Manuel utilisateur

EverFocus

EverFocus ECOR264 Manuel utilisateur

EverFocus

EverFocus ENVR8304X 04CH Manuel utilisateur

EverFocus

EverFocus ECOR264X1 Series Manuel d'installation et d'exploitation

EverFocus

EverFocus ECOR 4 Manuel utilisateur

EverFocus

EverFocus Paragon960 Manuel utilisateur

EverFocus

EverFocus eNVP-JNN-IV-V0008 Manuel utilisateur

EverFocus

EverFocus ENDEAVOR 264X4 Manuel utilisateur

EverFocus

EverFocus H.265 VANGUARD II Series Manuel utilisateur

EverFocus

EverFocus EMV400 FHD Manuel utilisateur

EverFocus

EverFocus PARAGON Series Manuel utilisateur

EverFocus

EverFocus PARAGON Manuel utilisateur

EverFocus

EverFocus EPHD16+U Manuel utilisateur

EverFocus

EverFocus eDR1680 Series Manuel utilisateur

EverFocus

EverFocus EDR HD-4H4 Manuel utilisateur

EverFocus

EverFocus EDSR-1600 Manuel utilisateur

EverFocus

EverFocus EDR810H Manuel utilisateur

EverFocus

EverFocus PARAGON264x4--32CH Series Manuel utilisateur

EverFocus

EverFocus ECOR 264x1-16 Manuel utilisateur

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur