EverFocus EMV1200 FHD Manuel utilisateur

EMV1200 FHD / EMV800 FHD

12CH/8CH Hybrid Mobile DVR

Quick Installation Guide

Release Date: May, 2018

All the images including product pictures or screen shots in this document are for example only.

The images may vary depending on the product and software version. Information contained in

this document is subject to change without notice.

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

1. Introduction

The latest EverFocus digital video recorder generation is based on H.264 compression

technology, resulting in enhanced recording capacity and improved network image transmission

speed with high image quality. The EMV800 FHD / EMV1200 FHD can support both of analog

(AHD/TVI/SD) and IP cameras, delivering up to 1080p (analog) and up to 4MP (IP) image quality.

Its comprehensive features along with the embedded 3-axis g-sensor function enable the almost

universal application of this mobile DVR series. It supports various interfaces such as alarm I/O,

three USB ports, one RS-485 and three RS-232 for connecting to devices such as Panic Button or

CAN bus. You can also optionally connect GPS receiver, 3G, 4G and Wi-Fi Antenna to the mobile

DVR. The design of RCA video/audio outputs at front panel makes your installation easy. You

can install one 2.5”hard disk or SSD in the mobile DVR. You can also install one SD Card for

alarm event backup recording. The User Interface has been specially designed to fit mobile

small-sized monitor.

EMV800 FHD / EMV1200 FHD are equipped with anti-shock and anti-vibration housing. The

aviation M12 connectors are also equipped. The power supply supports voltage regulator, and

delay on/off. In addition, the mobile DVRs are SAE-J1455, EN50155, E-Mark, CE and FCC

certified.

You can use EverFocus Mobile Applications, MobileFocus, to remotely view the camera streams

from the mobile DVR through your handheld devices; or use EverFocus Xfleet system for remote

fleet management. You can also use EverFocus EF-Reader to remotely back up recordings from

the HDD/SD card of the mobile DVRs. The mobile DVR series is the ideal solution for your mobile

surveillance needs.

Minimum System Requirements

Before installing, please check that your computer meets the following system requirements.

Operating System

Windows XP (32-bit) / Win7 (32 and 64-bit)

CPU

Intel Core I3-2100

RAM

2GB

VGA

Intel HD 2000

LAN Speed

10 / 100 / 1000 Mbps (RJ45)

Web Browser IE11 and later, Firefox 50 and earlier, Chrome 44 and earlier, EF browser

Other Remote

Application

1. EverFocus’ Xfleet fleet management server system.

2. EverFocus’ mobile app: MobileFocus (iOS / Android); MobileFocusHD

(iPad).

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

Packing List

•Mobile DVR x 1

•HDD Tray Lock Key x 2 (with 4 screws for screwing HDD. See 2.2 Hard Disk Installation)

•HDD Power Lock Key x 2 (with 4 black screws and 8 spacers for mounting the mobile DVR.

See 2.1.1 Mounting)

•IR Remote Control (with two AAA batteries. See Note 4) x 1

•Power Harness Cable x 1

•Video Cable x 3 (EMV1200 FHD); x2 (EMV800 FHD) (see 3.2 Video Cable / Power-Out

Cable)

•Audio Cable x 1 (see 3.3 Audio Cable)

•D-Sub Cable x 1 (see 3.4 D-Sub Cable)

•Power-Out Cable x 1 (see 3.2 Video Cable / Power-Out Cable)

•CD x 1 (Please see Note 3.)

•Quick Installation Guide x 1

Optional Accessories

The mobile DVRs feature Wi-Fi/3G/4G. You can optionally connect Wi-Fi/3G/4G module and

antenna to the mobile DVR for networking, or connect a GPS receiver for GPS function.

•3G Antenna: For using 3G network

function

3G Antenna

3G Module

•4G Antenna: For using 4G LTE network (LTE

frequency bands differ among regions)

4G Antennas

4G Module

•Wi-Fi Antenna: For using Wi-Fi function

Wi-Fi Antenna

Wi-Fi Module

•GPS Receiver (LS23035):For using GPS

function

•Reinforced Data Storage Device (64GB)

For recordings backup

Note:

1. Equipment configurations and supplied accessories vary by country. Please consult your

local EverFocus office or agents for more information. Please also keep the shipping

carton for possible future use.

2. Contact the shipper if any items appear to have been damaged in the shipping process.

3. The CD contains the IP Utility software, User Manual and Quick Installation Guide.

4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions.

a. Use only two AAA dry cell batteries.

b. Do not dispose of the batteries in a fire as it may explode.

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

Front Panel

4910

56811

EMV800 FHD / EMV1200 FHD

No.

Name

Description

1 HDD Power

Lock

Lock to power on the HDD. After locking the HDD Tray Lock (No.2), lock

the HDD Power Lock to power on the HDD. The HDD power indicator

will light in blue to indicate the HDD power is on.

Note: Only when the HDD Power Lock is locked will the system start to

record on the HDD.

2 HDD Tray Lock Lock or unlock the HDD tray. To power on the HDD, the HDD Power

Lock (No.1) has to be locked.

3 HDD Tray Install a 2.5” HDD (up to 2TB) or SSD (up to 4TB) for recording.

4 USB2.0 Port Three USB2.0 ports for connecting to the USB storage device or mouse.

5 SD Card Slot

Insert a SD / SDHC card (up to 128GB) for alarm event backup recording

(see 2.3 SD Card Installation). To see the SD card info, see 6.4.2 SD Card

in the User’s Manual. To enable the SD card function, see 6.3.1 Alarm in

the User’s Manual. You can also download the Storage Compatibility

Table from the product page (click Download) to see the tested card

brands. www.everfocus.com.tw

6 Function Key

Press the button for 3 seconds to switch the RCA / BNC video output

from call monitor to main monitor; and to switch the VGA video output

from main monitor to call monitor. To switch back the main and call

monitors, press the button for 3 seconds again. Please refer to 3.8

Monitor Connection for more details.

7 IR Receiver Receives data from the infrared remote control.

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

8 System LEDs

•Alarm: Turns on when the connected alarm I/O is triggered; turns

off when the alarm I/O stops being triggered.

•GPS: Turns on continuously when the mobile DVR is receiving GPS

data.

•System Fail: Turns off when system is acting normally. Turns on

when these events occur: System Clock Error / Fan Fail / Disk

Temperature Over / Disk Fail / Disk Off / Network Loss.

•Heater: Blinks when heater on; off blinking when heater off.

•HD R/W: Blinks when the HDD is reading or writing.

•Power: Turns on continuously when the power is supplied. Blinks

when Battery power error occurs (lower than 9V or higher than 36V)

or 12VDC power supply error.

9 Call Monitor

(RCA)

By default, this port is set to a Call monitor output. Connects to a Call

monitor using a RCA cable.

Note: You can optionally switch this port from Call monitor to Main

monitor. Please refer to 3.8 Monitor Connection for more details.

10 Audio Out

RCA audio output for connecting to the speakers. The audio output only

works during playback. Speakers with a (built-in) amplifier and external

power supply are required.

11 Ethernet Port

(WAN) One RJ-45 port for connecting to the network.

Rear Panel

EMV800 FHD

8914

10 13

EMV1200 FHD

9-12 CH

8914

10 13

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

No. Name Description

1 Main Monitor

(VGA)

By default, this port is set to a Main monitor output. Connects to a

Main monitor using a VGA cable.

Note: You can optionally switch this port from Main monitor to

Call monitor. Please refer to 3.8 Monitor Connection for more

details.

2 Antenna 1 (3G/4G) Connects to the 3G or 4G Antenna for using 3G / 4G LTE function.

3 Antenna 2 (4G)

Connects to the 4G Antenna for using 4G LTE function. Note that

the 4G function is required to use both Antenna 1 and 2.

4 Antenna 3 (Wi-Fi)

(2.4GHz / 5GHz)

Connects to the Wi-Fi Antenna for using Wi-Fi (2.4GHz / 5GHz)

function.

5 Antenna 4 (Wi-Fi)

(5GHz)

Connects to the Wi-Fi Antenna for using Wi-Fi (5GHz) function.

Note that the 5GHz Wi-Fi function is required to use both Antenna

3 and 4.

6 Audio Input

D-Sub connector for connecting to the supplied Audio Cable. For

details, please refer to 3.3 Audio Cable. Microphones with a

(built-in) amplifier and external power supply are required.

7 D-Sub Connector

D-Sub connector for connecting to the Alarm I/O, RS-232 (CAN

bus) or RS-485 devices (such as analog PTZ cameras). For details,

please refer to 3.4 D-Sub Cable.

8 Ethernet Port (LAN)

M12 connector for connecting to IP cameras. For details, please

refer to 3.5 Ethernet Cable.

9 Call Monitor (CVBS)

By default, this port is set to a Call monitor output. Connects to a

Call monitor using a BNC cable.

Note: You can optionally switch this port from Call monitor to

Main monitor. Please refer to 3.8 Monitor Connection for more

details.

10 USB Port

USB ports for connecting to the USB device. For details, please

refer to 3.6 USB Cable.

11 Video Input

M12 connector for connecting to the supplied Video Cable. You

can then connect analog HD / SD cameras to the Video Cable.

Please refer to 3.2 Video Cable / Power-Out Cable.

12 GPS Data Input

Connector for connecting to the GPS receiver. For details, please

refer to 3.7 GPS Cable.

12VDC Power

Outputs

A total of 12VDC, 5A power supply to the connected cameras.

Please refer to 3.2 Video Cable / Power-Out Cable.

14 DC Power Input

Use the supplied Power Harness Cable for connecting to 9 ~

36VDC power source. For details, please refer to 4 Vehicle

Connection.

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

2. Getting Started

2.1 Installation

Before installation, choose a location in the vehicle where it can:

•Provide convenient access for installing or removing the hard disk

•Allow air to flow around the fan vents. Inadequate or improper air flow can impede proper

operation of the mobile DVR

Please avoid installing the mobile DVR to the following locations in the vehicle:

•That is subject to high vibration / sunlight levels

•That is subject to be drenched of the rain

•Where passengers can interfere with the mobile DVR

•Next to a heater duct

The following table lists the recommended location options in the vehicle:

Location Convenient

Operation

Easy to

Install

Low

Vibration

Good

Air Flow

Bottom of glove box- horizontal mount

Yes Yes Yes Yes

Bottom of passenger seat next to the driver

No Yes Yes Yes

Underneath bulkhead-horizontal mount

Yes Yes No Yes

Front of bulkhead-horizontal mount Yes Yes Yes Yes

Beside deriver seat-horizontal mount

Yes Yes Yes Yes

Note: Do not install the mobile DVR on the floor or on the transmission access hatch. These

locations have the highest levels of vibration and may be subject to water damage.

2.1.1 Mounting

You can mount the mobile DVR onto a surface inside the vehicle. Please note that to meet the

EN50155 and the SAE-J1455 standard for the mobile DVR, the Bracket on the MDVR is required

to be used.

Support-Mount

Interface

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

Dimensions:

175mm/7"

207mm/8.14"

229.6mm/9.04"

5.5

192mm/7.55"

218mm/8.58"

236.6mm/9.3"

146.6mm/5.77"

76mm/2.99"

63.4mm/2.5"

Installation: The Bracket is already installed on the mobile DVR. To mount the mobile DVR onto

a surface, use the supplied 4 black screws and 8 spacers (place 2 spacers on each screw hole).

Spacer with a cut

Screw Hole

2.2 Hard Disk Installation

You can insert a 2.5” HDD or SSD into the HDD tray for video recording. Please follow the

steps below.

Note:

1. The mobile DVR does not support hot swap for the hard disk. Ensure to power off the

mobile DVR before removing the hard disk. Also ensure to remove the hard disk only

after the power is completely shut-off. This would protect and extend the operating life

of the hard disk.

2. Please go to the EMV800 FHD / EMV1200 FHD Web page on our website

http://www.everfocus.com.tw to see the latest Storage Compatibility List. It’s

recommended to use the HDD/SSD models listed in the Storage Compatibility List to

ensure your storage will be compatible.

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

1. Make sure the mobile DVR is powered-off. Unlock the HDD Power Lock using the supplied

HDD Power Lock Key. Use the supplied HDD Tray Lock Key to unlock the HDD Tray.

Locked

Unlocked

HDD Power Lock HDD Tray Lock HDD Power Lock

Unlocked

Locked

HDD Tray Lock

2. Push the Release Latch to the right, and the Locking Arm will pop up.

Release Latch Locking Arm

3. Gently pull out the Locking Arm to take out the HDD tray.

HDD Tray

Locking Arm

4. Insert a HDD in the HDD Tray and then screw the HDD to the tray with the supplied 4

screws.

EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR

5. Insert the HDD Tray into the drive bay and close the Locking Arm until you hear a click.

6. Lock the HDD Tray Lock and HDD Power Lock before you power on the mobile DVR.

Locked

Unlocked

HDD Power Lock HDD Tray Lock HDD Power Lock

Unlocked

Locked

HDD Tray Lock

2.3 SD Card Installation

The mobile DVRs provide SD card function for Alarm event backup recording. Please follow

the steps below to install the SD Card. Up to 128 GB SD / SDHC cards are supported. You can

also download the Storage Compatibility Table from the product page (click Download) to see

the tested card brands. www.everfocus.com.tw

1. On the front panel of the mobile DVR, unscrew the SD card protection plate.

2. Push down the SD card protection plate and then insert a SD card.

3. Screw back the SD card protection plate. The SD card installation is now complete.

Autres manuels pour EMV1200 FHD

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EverFocus DVR

EverFocus

EverFocus ECOR4D Mode d’emploi

EverFocus

EverFocus EDVR16D3 Manuel utilisateur

EverFocus

EverFocus ENVR8304X 04CH Manuel utilisateur

EverFocus

EverFocus EMV800 HD Manuel utilisateur

EverFocus

EverFocus EDR410H Manuel utilisateur

EverFocus

EverFocus PowerPlex EDR1600 Manuel de service

EverFocus

EverFocus EDSR400M Manuel utilisateur

EverFocus

EverFocus MoniVue System ESN41 Manuel utilisateur

EverFocus

EverFocus PARAGON 264x4-16 Manuel utilisateur

EverFocus

EverFocus ECOR4D Manuel utilisateur

EverFocus

EverFocus ENVR8304E-8CH Manuel utilisateur

EverFocus

EverFocus EMV401 Manuel utilisateur

EverFocus

EverFocus VANGUARD II 16x8H Plus Manuel utilisateur

EverFocus

EverFocus PowerPlex EDR-1640 Manuel utilisateur

EverFocus

EverFocus ECOR 4 Manuel utilisateur

EverFocus

EverFocus ECOR264-4D1 Manuel utilisateur

EverFocus

EverFocus EMV400 Manuel utilisateur

EverFocus

EverFocus eZ.HD ECOR HD 16X1 Manuel utilisateur

EverFocus

EverFocus VANGUARD II 16x8H Manuel utilisateur

EverFocus

EverFocus VANGUARD II 8x4H Manuel utilisateur

EverFocus

EverFocus ECOR264-D2 DVR Series Manuel utilisateur

EverFocus

EverFocus eZ.HD ELUX4 Manuel utilisateur

EverFocus

EverFocus eIVP5600 Manuel utilisateur

EverFocus

EverFocus ENDEAVOR 264X4 Manuel utilisateur

Manuels DVR populaires d'autres marques

FLIR

FLIR M3100E Series Manuel utilisateur

VTRACKPRO

VTRACKPRO FPRO300 Manuel utilisateur

Swann

Swann NVR-7085 models Manuel utilisateur

XtendLan

XtendLan DVR-1670C Manuel utilisateur

urmet domus

urmet domus 1093/004AHD Manuel utilisateur

Holux

Holux M1 Manuel utilisateur

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuel utilisateur

Whistler

Whistler D16VRS Manuel utilisateur

Defender Security

Defender Security 82-20235 Manuel utilisateur

MISUMI

MISUMI MP-WF100M Manuel utilisateur

Speco

Speco D8HU Manuel utilisateur

UST

UST DDR-E04AA Instructions d'utilisation

Consolidated

Consolidated Digital Video Recorder Manuel utilisateur

Mace

Mace DVR0404RW Guide de démarrage rapide

RCA

RCA RTD315W Manuel utilisateur

FSM

FSM Colibri Grande PRO Manuel utilisateur

Hauppauge

Hauppauge HD PVR 2 Manuel utilisateur

Identivision

Identivision ICR-PH161i PIONEER Manuel utilisateur