Everet EVZ405N Manuel utilisateur
EVERET EVZ405N
5x 4K NDI UHD POV Video Camera
User Manual
Version V1.0
（English)
1WWW.EVERETIMAGING.COM
CONTENT
SAFETY GUIDES 1
PACKING LIST 2
PRODUCT HIGHLIGHTS 4
TECHNICAL SPECIFICATIONS 5
CAMERA INTERFACE 6
CAMERA DIMENSIONS 6
IR remote controller 7
OSD MENU 8
Webinterface 18
GETTING STARTED WITH NDI 29
VISCA OVER IP 34
HOW TO USE VISCA OVER IP 34
SAFETY GUIDES
1. Before operation, please fully read and follow all instructions in the manual.
2WWW.EVERETIMAGING.COM
2. The camera power input range is 100-240 VAC (50-60Hz), ensure the power supply input
within this rate before powering on.
3. The camera power voltage is DC12V/8W. We suggest you use it with the original power
supply adapter or use PoE+ (IEEE802.3at) compatible switch.
4. Please keep the power cable, video cable and control cable in a safe place. Protect all
cables, especially the connectors.
5. Operational environment: 0℃-50℃, humidity less than 90%. To avoid any danger, do not
put anything inside the camera, and keep away from the corrosive liquid.
6. Avoid stress, vibration and damp during transportation, storage, and installation.
7. Do not detach the camera housing and cover. For any service, please contact authorized
Everet technicians.
8. Video cable and control cable should be individually shielded and cannot be substituted
with other cables.
9. Do not direct the camera lens towards strong light, such as the sun or the intensive light.
10. Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent
when there is need to clean. To avoid damage on the camera lens, never use strong or
abrasive cleaning agents on the camera housing.
11. Do not move the camera by holding the camera head. To avoid mechanical trouble, do
not rotate the camera head by hand.
NEVER MOVE THE CAMERA MANUALLY WHEN IT IS WORKING.
12. Put the camera on fixed and smooth desk or platform, avoid leaned installation.
13. Power Supply Polarity (Drawing)
Note:
The video quality may be affected by the specific frequencies of electromagnetic fields.
PACKING LIST
Check all bellow items when open the package:
Camera
1
3WWW.EVERETIMAGING.COM
Power Adapter
1
Power Cable
1
Wall mount
1
Remote Controller
1
QUICK START
1. Check all cable connections.
2. Power on the camera with the 12V adapter or use a POE+ switch.
PoE+ switch requirements:
(PoE+ IEEE 802.3af/at compliant with total power of 126W up to 30W per port)
Recommended unmanaged PoE+ network switches:
- TP link TL-SG1008MP 8-port
- Netgear GS16PP 16-port
3. Check if you get video output from SDI.
NOTE: The default resolution of the camera is 1080P30.
4. Check if you can Pan and Tilt the camera with the IR remote controller.
5. Please check the default camera IP address (192.168.1.188) for operation in your
network or simply change IP address in OSD menu settings using IR remote controller.
4WWW.EVERETIMAGING.COM
Please go to chapter: ‘OSD Menu’ and follow instructions ‘Change IP address’ to see
how to do this.
PRODUCT HIGHLIGHTS
•Sony DSP, 1/2.8 inch 8.5MP sensor, providing full HD video resolution and crystal clear image.
•High end 5x optical zoom 4k lens with 85 degree field of view.
•NDI|HX and 3G-SDI output video simultaneously
•NewTek NDI v4.5 video transmission and control
•IP Video Streaming, includes both H.264, H.265 video encoding
•White Balance, Exposure, Focus, Iris can be adjusted automatically or manually
•Power over Ethernet (PoE+) support: get video, control, tally and power supply with
one CAT5/6 cable
•Built-in tally light
•Special Focusing Algorithm: fast and precise focusing performance when zooming or
moving
•128 presets supported
•Standard Sony VISCA, VISCA over IP, PELCO-P, PELCO-D control protocol; IP VISCA
over both TCP and UDP
•Daisy chain supported, max 7 cameras connected in VISCA protocol
•Image flip function, support upside-down installation
•Supplied with functional IR remote controller
•Fast video format switch: less than 3 seconds
•Support RS232/RS485/UVC control
•OSD menu in English, IP address, streaming resolution and size can be set in OSD
menu
5WWW.EVERETIMAGING.COM
TECHNICAL SPECIFICATIONS
Sensor
1/2.5 inch, 8.51megapixel high quality CMOS Sensor
Video Format
IP
3G-SDI
NDI|HX
Main Stream:
3840*2160P15~30
1080P15~30
720P15~30
1024*576P15~30
Sub Stream:
640*360P15~30
1080P60/59.94/50/30/29.97/25
1080I60/59.94/50
720P60/59.94/50/30/29.97/25
3840*2160P15~30
1080P15~30
720P15~30
1024*576P15~30
640*360P15~30
Optical Zoom
5X
Digital Zoom
4X
Angle of Viewing
26.5°（near）~85°（far）
F.no.
Wide：2 Tele ：2.8
Min. Focus Distance
Wide：0.3m Tele：1.5m
Preset No.
Remote controller: 10; RS232: 128 (only save optical zoom and focus position)
Control Port
RS232 /RJ45
Video Port
RJ45/SDI
Audio Port
Line In
Network Port Speed
1000M
Noise Reduction
2D&3D
S/N Ratio
>50dB
Focus
f＝2.8(near)～14mm(far)
Minimum Lux
0.1 lux
White Balance
Auto/Indoor/Outdoor/Manual/One Push/Sodium Lamp Auto/Sodium Lamp
Anti-Flicker
OFF/50Hz/60Hz
Night Mode
Supported
Gamma
Supported
Up-side Down
Supported
Mirror
Supported
Focus
Auto / Manual
Iris
Auto / Manual
Electric Shutter
Auto / Manual
BLC
Auto / Manual
Pan Tilt Flip
Supported
Video Encode
H.264/H.265
Bit Rate Control
Variable Bit Rate, Constant Bit Rate
Video Bit Rate
1024Kbps~51200Kbps
Frequency
15fps~30fps
Supported Protocol
TCP/IP, HTTP, RTSP, RTMP, Onvif, DHCP，VISCA, VISCA over IP
6WWW.EVERETIMAGING.COM
POE
Supported
Input Voltage
DC12V/12W POE(IEEE802.3af)
Dimension(L x W x H)
168.8 x 80 x 80 (MM)
Net Weight
0.65KG
CAMERA INTERFACE
1. Extra holes
4.3G-SDI Port
7.Power Indicator Light
2. Screw thread
5.RS232 Port
8.12V Power Input
3.RJ45 Port
6.Line in Port
CAMERA DIMENSIONS
7WWW.EVERETIMAGING.COM
IR remote controller
LED Function Instruction
Press any button and shows in red color: Current selection is to control the camera;
Press any button and shows in green color: Current selection is to control the codec;
Press any button and shows in blue color: Current selection is to control the TV;
Power button
Red button: in normal work mode, short press one time, camera will enter standby
mode; short press again, the camera will start self-configuration and go to HOME
position; it will go to No.0 preset position if that was set;
Green button: Codec power button(need to learn the button coding);
Blue button: TV power button (need to learn the button coding);
Focus (Left): +/-
Manual focus, only valid under manual focus model;
Zoom (Right): +/-
Control the lens zoom rate;
Navigate : Up/Down/Left/Right
In normal working mode, use navigate key to control pan/tilt;
Confirm/Home button:
In normal working mode, short press to let the camera go back to Home position.
Menu button:
Enter the OSD menu
Number buttons
Set Preset: Long press(3seconds) the number button to save preset;
Clear Preset: +number button to clear the relative preset; Long press(3seconds) the Clear button to clear
all preset;
Run Preset: Short press the number button to run the relative preset.
8WWW.EVERETIMAGING.COM
OSD MENU
1. Press the MENU key on the IR remote controller, to enter the OSD menu as bellow:
2. After entering the main menu, use the UP/DOWN keys on the IR remote controller to navigate
through the menu. Once selected, the main menu will change to blue background, and the
right side will show all sub menu options.
3. Press the navigate RIGHT key to enter sub menu; use UP/DOWN key to select the submenu.
use the LEFT/RIGHT key to select parameter.
4. Press the MENU key again to return to previous menu. Press the MENU key continuously to
exit the OSD menu. Settings that have been changed are automatically saved.
9WWW.EVERETIMAGING.COM
1. System
SYSTEM
LANGUAGE
Optional Item: English
Default：English
PROTOCOL
Optional item：VISCA/PELCO-P/PELCO-D
Default：VISCA
ADDRESS
VISCA:1~7 PELCO-P/D:1~255
Default：1
BAUD RATE
Optional item: 2400/4800/9600/115200
Default：9600
DHCP
Return to previous menu
Default：OFF
ADDRESS
Camera IP address
192.168.001.188
NETMASK
Current subnet mask
255.255.255.000
GATEWWAY
Current gateway
192.168.001.001
RETURN
Return to previous menu
Table des matières
Autres manuels Everet Appareil photo numérique
