Eurotech UPPERCUTMANUAL Manuel utilisateur
VERTICAL CUTTER
UC-210 UPPERCUT MANUAL VERTICAL CUTTER, 210 cm
UC-250 UPPERCUT MANUAL VERTICAL CUTTER, 250 cm
USERS MANUAL
UC-AUTO-305 UPPERCUT AUTO VERTICAL CUTTER, 305 cm
2
EUROTECH GROUP PTY LTD, 72 John Street, Welshpool 6106, WA
3
INTRODUCTION
EUROTECH is not responsible of damages as result of an use or maintenance of the machine not foreseen in this introduction manual.
In the same way EUROTECH frees any responsibility derived for the use of pieces and spare parts witch are not originals.
This machine has been designed and produced under the essentials requirements of the Directive 98/37 CE.
For any claim or observation, please indicate model, serial number and year, wich is show on the plate, and also the distributor who sold the machine
and address to:
EUROTECH 72 John Street, Welshpool 6106 WA
Tel: +61 1800 30 61 61
Email: [email protected]
INDEX
Introduction.................................................................................................................. 3
General information........................................................................................ 4 - 5
• Machine identication
• Size, weight and package sizes
• How to proceed with transport damages
• Unpacking Instructions
• List of parts
Assembly instructions................................................................................ 6 - 14
Accessories assembly instructions................................................15 - 17
Adjusting the UpperCut..........................................................................18 - 19
• Squaring process
Technical Data .................................................................................................20 - 21
• Technical Characteristics
• Control Device
Uses of the UpperCut .................................................................................22 - 26
Indications....................................................................................................................27
• Uses not allowed
• Security standards
• Maintenance and conservation
• Security signs and vocabulary
Spare parts...................................................................................................................28
4
GENERAL INFORMATION
MACHINE IDENTIFICATION
This machine comes with a dataplate with the following informa-
tion:
CE Marking
Name and address of the manufacturer
Designation of the machine (Model)
Serial number
Weight (kg)
Manufacturing year
All spare orders or technical requests must be accompanied with
model, serial number and purchasing year.
SIZE, WEIGHT AND PACKAGE SIZES
HOW TO PROCEED WITH TRANSPORT DAMAGES
1. Try to open the parcel together with the driver.
2. If the content is damaged, try to make a protocol and pictures
of the damage.
3. If you decide to accept the goods, please do this with writing
“damaged” on the tracking note.
4. Please inform your local importer or dealer about everything
within the very next hours.
UC-210
UpperCut Manual 210 cm
UC-250
UpperCut Manual 250 cm
Dimensions A x B x C 268 x 210 x 56 cm
105 x 82 x 22“
310 x 210 x 56 cm
122 x 82 x 22“
Weight 84 Kg / 185 lb 102 kg / 224 lb
Packing dimensions 278 x 49 x 46 cm 331 x 49 x 46 cm
Packing weight 114 Kg
126 Kg (with free standing)
130 Kg
144 Kg (with free standing)
UC-305
UpperCut Auto 305
Dimensions A x B x C 365 x 210 x 56 cm
143 x 82 x 22 "
Weight 128 Kg / 282 lb
Packing dimensions 410 x 49 x 46 cm
Packing weight 182 Kg
198 Kg (+ free standing)
5
UNPACKING INSTRUCTIONS
The machine comes packed in a cardboard box. It is provided with a working guide and a complementary kit. To unpack the machine, please
follow the next steps:
A. Cut the machine holding strips.
B. Remove the cover of the cardboard box. C. Unscrew and remove the security parts which fix the structure to the cage.
C. Remove all containing groups and parts. Handle with care
CAUTION: Some containing groups and parts into the cage are heavy. Two people are required to manipulate them.
D. Refer to the list of parts and familiarize yourself with all described groups and parts.
E. Read carefully this working guide and see the section “Assembly Instructions” to set up the machine.
GENERAL INFORMATION
LIST OF PARTS INBLADE
Parts to set up the machine:
A1. Main assembly group with lateral brackets UpperCut Manual
A2. Main assembly group with lateral brackets UpperCut Auto
B. Horizontal support group with measurement stops.
C. Panel supports (8 units).
D. Double handle system group Only for UpperCut Manual
E. Adjusting screw system.
F. Cutting heads support.
G. Working guide.
Cutting heads list:
1. Semi-rigids cutting head -Included-
2. Aluminium composite cutting head -Included-
3. Acrylic cutting head -Optional accessory-
4. Triple Blade cutting head -Optional accessory-
5. V-Groove cutting head Rigids -Optional accessory-
6. Re-Board V-Groove Cutting Head -Optional accessory-
7. Foamboard V-Groove Cutting Head -Optional accessory-
8. Glass Cutting Head -Optional accessory-
SET OF ACCESSORIES PROVIDED
Allen keys set (x5).
13 mm wrench.
17 mm wrench.
Tube wrench.
A
1
3
4
5
6 7
2
DEF
C
B
A1 A2
x8
8
6
STAGE 1
1. Loosen the top two screws of the lateral bracket located at the left side (A). Repeat the same process for the lateral bracket located at the right side.
2. Open the two lateral brackets until the maximum position (B).
Caution: For the moment do not tighten these four loosened screws.
ASSEMBLY INSTRUCTIONS
B
B
A
Attention: Model shown is the UpperCut Manual but for the UpperCut Auto please follow the same steps.
7
ASSEMBLY INSTRUCTIONS
STAGE 2
1. Loosen the screws which hold the telescopic legs from both sides (A, B).
2. Lengthen the telescopic legs up to the desired length (C). Be sure to put the same length at the right and left side.
3. Tighten the loosened screws to fix the telescopic legs again.
A
B
C
A
B
C
X
8
ASSEMBLY INSTRUCTIONS
STAGE 3
1. Remove the screw and the washer from the left lateral bracket (A).
2. Remove the three screws and the washer from the right lateral bracket (B).
3. Remove the screws, washers and nuts from the central columns of the main assembly group (C). Do not remove the two spacers located at the
central columns (D). Caution: Remember the position of all the removed parts.
A
B
C
A
B
C
D
9
ASSEMBLY INSTRUCTIONS
STAGE 4
1. Remove the five screws and the five washers situated at the bottom of the horizontal support group (A).
2. Fit the horizontal support group between the columns of the main assembly group, as shown in the figure. Align the two holes of the horizontal
support group (B) with the two holes of the main assembly group (C).
A
B
A
B
C
10
ASSEMBLY INSTRUCTIONS
STAGE 5
1. Use the screws, washers and nuts removed previously to join the horizontal support group with the main assembly group through the holes of
the central columns (A, B). Use the supplied 17 mm wrenches to fix the nuts.
2. Join the horizontal support group with the two lateral brackets using the screws and washers removed previously (C).
C
A
B
A
B
C
Ce manuel convient aux modèles suivants
4
Table des matières
