.
c)scAN
’
-
To automatically scan through different frequencies, one
must enter the Set Video/Audio Mode first, choose Video
Freq. and then press “Scan” key.
-
The frequency range scanned differs from the Band type
(with KU Band and C Band for option) set in the Set
System Mode.
-
For C Band: the frequency range scanned is between
3,700
GHz
and 4,200
GHz
regardless the containment of
22
KHz.
-
For KU Band:
*
If the KU Band does not contain 22 KHz (22 KHz in the
Set System Mode is set to
off),
the range scanned is
between 10,700
GHz
and 11,700
GHz.
*
If the KU Band contains 22 KHz (22 KHz is set to on),
the range scanned is between 11,700
GHz
and 12,800
GHZ.
-
The scan speed of this model is about 8 MHz per second.
-
Press “Scan” key, the screen would automatically turn to a
bluebackground.
-
Before any frequency is detected, the blue background
would remain on the screen with audio in Mute mode.
-
While auto-scan is in action:
*
If
POL-V/H
in the Set System Mode is set to
V-13VDC,
the receiver would scan in accordance with V-13VDC
first.
If no frequency is detected then, the POL-V/H
would change to H-17VDC automatically and scan again.
If there is still no frequency detected, the POL-V/I-I and
Video Freq. will resume to the previous value.
*
If the POL-V/H in the Set System Mode is set to
H-
17VDC,
the receiver would scan in accordance with
H-
17VDC
first. If no frequency is detected then , the
POL-
V/H would change to
V-13VDC,automatically
and scan
again.
If there is still no frequency detected, the
POL-
V/H and Video Freq. will resume to the previous value.
-
Auto-scan would be stopped, either manually or when a
frequency is detected, users could perform one of the
following:
*
Press
“Scan”
key again to continue scanning and no
frequency detected is saved.
*
Press “OK” key to save the frequency in the memory and
leave the Set Mode.
*
Press “Set” key to leave the Set Mode directly. No
frequency is saved and the latest memorized channel will
be recovered.
*
Press
“CH0”
key to leave the Video Freq.
The
frequency detected would be preserved, which is
convenient for users to set up other items.
*
Press
‘+”
or
‘I-“
key to increase the frequency detected for
fine tuning. Then users could perform one of the
following:
**Press “Scan” key again to resume scanning from the
frequency adjusted.
**
Press
“OK”
key to save the frequency and leave the Set
Mode.
**Press
“Set”
key to leave the Set Mode directly.
N
O
frequency detected is saved and the latest memorized
channelwill be recovered.
-
For further scanning, one needs to return to the Video
Freq. and press “Scan” key again and repeat the steps in
the above.
d)-
-
There are two VIDEO BANDWIDTH (WIDE
:
27MHz
AND NARROW
:
16 MHz) for selection.
e)COXlXAST
-
4 video level control.
-
Usually, 2 is selected for ASTRA programs.
-
Use
‘I+/-”
keys to select for proper low receiving
threshold.
-
Lower threshold may help reducing the noise on the
picture. However, picture quality might be degraded.
-
If low threshold is not required, set L.T. at 0.
a-
- There are 7 audio modes for selection.
DISPLAY
AUDIOMODE--
sTEREo/N/DNR
STEREO
NARROW DNR
MONO/L/DNR L/MONO
NARROW DNR
MONO/R/DNR R/MONO
NARROW
DNR
MONO/W/5OuS MONO WIDE
SOUS
MONO/W/75uS MONO WIDE
75us
MONO/W/J1
7
MONO J17
EXT
(
EXTERNMElO
)
Note
:
If a CANAL PLUS decoder is connected, select
“EXT” for Digital Audio, or, select
“Stereo/N/DNR’
for PANDA Stereo
h!AUDTO
-
The audio frequency is set with
(+)/(-)
keys at
1OKHz
per
step or entered directly with the (0)
-
(9) keys.
-
The audio frequencies that can be set, range from
4.50 MHz
-
9.95
MHZ.
-
For MONO, The setting for AUDIO l/2 is automatically
coupled.
-
For STEREO, the AUDIO l/2 is always coupled 180 KHz
(.
18 MHz) apart.
-
Press (SET) key and the following menu appears:
CH 600
CH MODE.
LNB.
BAND.
OPT/SAT.
o/12
VDC.
DECODER.
\
SYSTEM
\
NORMAL
1
KU
l/l
OVDC
NORMAL
