SafetyInstructions
Before installing your digital satellite receiver, all security and operating instructions should be
read and understood. The User’s Manual should be retained for future reference.
All warnings and hints on the product and in the operating instructions should be adhered to.
All operating and using instructions should be followed.
Never allowchildren to operate this electrical device without supervisor.
ENVIRONMENTAL CONDITIONS
Protect the receiver against humidity, heat and cold. Allow10cmspace around the receiver for
sufficient ventilation. Do not cover the receiver’s ventilation openings with items like
newspapers, tablecloths, curtains, etc. .
Do not place any objects filled with liquids, such as vases, on the satellite-receiver.
Take care that no foreign bodies or liquids are getting into the device.
Do not expose the set-top-box(receiver) to dripping or splashing liquids.
CONNECTING TO ANTENNA
Before connecting to the power supply the receiver must be cabled completely.
Attention: The total current consumption of all devices (LNB, multiswitch, …) connected to the
IF-Input must not exceed 300mA.
CONNECTING TO MAINS SUPPLY (SAFETY FEATURE!)
Connect the mains cable to a well reachable mains supply socket 230V~ 50Hz only. Do not
tilt, do not use disproportionate power and do not damage the receiver’s power socket and its
electrical connections when connecting the power cord. If the power cord should fail to fit,
contact your supplier.
FAILURE
If the power cord or the power socket or its electrical connection is damaged, immediately
unplug the mains cable fromthe mains supply socket. Do not try to open or repair the receiver
on your own!Service must be carried out only by experts at a proper service centre.
If replacement parts are required, only original components are allowed to use. The use of
unauthorised components may result in risk of fire and electric shock.
ENVIRONMENTAL PROTECTION
All packing material can be recycled and should be supplied to recycling. Empty batteries are
not allowed to be given to the domestic refuse and must be disposed at a designated station.
CLEANING AND MAINTENANCE
Before cleaning, unplug the device fromthe power supply.
For cleaning the casing, please use a soft, damp cloth. Do not use any washing-up liquids
that affect the casing. Do not spray a cleaner towards the receiver.
PLACEMENT
In touch with certain furniture surfaces it may happen that the receiver’s rubber feet may rub
off. You should place the device on a proper underground that is stable and not easily
inflammatory. Otherwise the receiver may fall and cause serious injury to people and serious
damages to the device.
Do not use this product near water (e.g. bath tube, wash bowl, …).
- 3 -
