EUROPRO X-Pro D140 Manuel utilisateur

EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET - Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36

SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510

X-Pro D140

Réf. 40090

User manual

Edition of 28/04/2021

More information on www.euromair.com

User manual - X-PRO D140 202105-515-ENGP2

You just acquired one of our

machines and all the team

of Europe Projection thanks

you for the condence

you have granted us.

Manufacturer of professional

equipments for paint and

llers, we have put our

know-how for 25 years

at the service of the

users of our machines.

Our technical & commercial

team is at your disposal

for any further information

you may need about the

machine you just acquired.

EUROPE PROJECTION

228, avenue Olivier Perroy

13790 ROUSSET

Tél : +33 (0)4 42 29 08 96

contact@euromair.com

SUMMARY

1. USER MANUAL............................................................. p. 3

1.1. Importance of the manual .........................................p. 3

1.2. Receivers of the manual............................................p. 3

2. WARNING .................................................................... p. 4

2.1. Safety .....................................................................p. 4

2.2. Transport ................................................................p. 6

2.3. End-of-life of the product ..........................................p. 7

3. YOUR MACHINE ........................................................... p. 8

3.1. Description..............................................................p. 8

3.2. Technical characteristics ...........................................p. 8

3.3. Identication of the components ................................p. 9

4. USE OF THE MACHINE ................................................. p.11

4.1. Machine prerequisites...............................................p.11

4.2. Machine starting up .................................................p.12

4.3. High pressure washer prerequisites ............................p.13

4.4. High pressure washer starting up ...............................p.14

5. DEFECTS AND REMEDIES............................................. p.16

6. CLEANING PROCEDURE ............................................... p.18

7. MAINTENANCE............................................................. p.19

8. SAFETY CARD RUNNING............................................... p.20

9. VOLUME SCHEME ........................................................ p.22

10. ELECTRICAL SCHEMES............................................... p.23

11. HYDRAULIC SCHEMES................................................ p.26

12. DECLARATION OF CONFORMITY ................................. p.29

13. WARRANTY CONDITIONS............................................ p.31

202105-515-ENG User manual - X-PRO D140 P3

1. USER MANUAL

1.1. IMPORTANCE OF THE MANUAL

This manual is a key part for the use of your machine. It summarizes the procedures of starting-up, cleaning

and maintenance of the device and also the safety instructions you need to observe.

Read carefully all the working and safety instructions and the warnings included in this manual before

starting your machine.

Most of the accidents are caused by the non-compliance of the safety standards and rules.

This manual must be kept near the machine, within reach of the user and held in good condition until the

nal destruction of the machine.

In case of loss or deterioration of the manual, you can ask the machine manufacturer mentioned on page

4 for a copy at any moment.

1.2. RECEIVERS OF THE MANUAL

This manual is intended to any staff which will manipulate the machine :

- people in charge of the transport of the machine

- people in charge of the use of the machine

- people in charge of the cleaning and maintenance of the machine

- people in charge of the nal destruction of the machine

User manual - X-PRO D140 202105-515-ENGP4

2. WARNING

2.1. SAFETY

Using the machine in an incorrect way or in non-compliance of the safety instructions indicated in

this manual can cause death or serious injuries.

Read carefully all the working and safety instructions and the warnings contained in this manual

before starting your machine.

• Respect all the safety standards before running the equipment.

• Use the equipment only for the applications specied in the manual.

• Always remain alert when using the equipment.

• Transport the machine using the handles or the appropriate grips.

• During the breaks, disconnect electrically the machine.

• Run the equipment to its nominal voltage.

• Let at least 50 cm of free space between the equipment and any obstacle so that the air ow

is not blocked.

• Know how to quickly stop the equipment in case of necessity.

• Never use the equipment while it is running abnormally or it is defective.

• Do not direct a water jet or ammable liquid on the machine.

• Never direct an air jet or product jet on a person or an animal.

• Do not touch warm surfaces of the equipment.

• Always wear adequate body protections (glasses, gloves, overall and mask) and pay attention

to long hair.

• Never touch moving parts.

• Do not insert any object or the hands inside the protection grids to avoid any accident or

damage to the machine.

• For any outside job, only use appropriate extension cords.

• Maintain the equipment carefully and clean it properly after every use.

• Disconnect the equipment before any intervention.

• Avoid absolutely to unscrew any connection while the machine is under pressure.

• Check the damaged parts.

• Do not clean the plastic parts with solvant.

• In case of needed After-Sale Service, always specify the machine model and its serial number.

• For any replacement of parts, only use genuine parts.

• Do not modify the machine.

• Do not cut or dismantle the protection grids.

• Do not open the electric box.

202105-515-ENG User manual - X-PRO D140 P5

IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL

MODIFICATION WITHOUT ADVANCED NOTICE.

2. WARNING (continued)

2.1. SAFETY (continued)

WORKSPACE

• Maintain the workspace clean and clear.

• Ambient operating temperature must be from -5°C and 35°C.

• Do not use the equipment in a potentially explosive area.

• Do not place any potentially inammable objects in close proximity to the machine.

• Take away every not qualied person from the working area of the machine, as well as children and

animals.

• Do not install the equipment on an inclined surface to avoid the risks of unexpected moves or falls.

HOSES

• Always use hoses and connections adapted to the used product (genuine parts), do not try to x it.

• Do not walk on the hoses, do not bend them.

• Do not use the hoses to pull the machine.

STORAGE

• Keep the equipment in a clean and clear area in which the temperature does not exceed +35°C.

• After every use, necessarily grease the pump with a mixture of water + storage liquid to avoid it blocking

up. The storage of a not greased pump can damage it seriously.

User manual - X-PRO D140 202105-515-ENGP6

IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL

MODIFICATION WITHOUT ADVANCED NOTICE.

2. WARNING (continued)

2.1. SAFETY (continued)

SAFETY SYSTEMS

This machine has been designed to allow working with the maximum safety.

So safety sensors and emergency stop has been setted on your machine without complicating your work.

We are insisting on your caring to maintain them in good condition and above all not to remove them.

In case of malfunction, please contact immediately your dealer.

HYDRAULIC

This machine is equipped with high pressure hydraulic circuits (200 bar).

The following insctructions are essential for your safety:

• Never tighten a hydraulic connection while the machine is working.

• Never try to wipe an oil drop on a hose or hydraulic component with your nger while the machine

is working.

• Take care of the good condition of the plumbing (a damaged or blistered rubber must be changed

immediately).

• Check regularly if the circuit does not have any leak.

• In any case, do not touch hydraulic parts (even when the machine is not working) because the

components shall be hot and there is a burn risk.

SAFETIES AND PROHIBITIONS

• The hopper grid rising up causes the screw movement stop.

• Emergency stop is located on the machine hood. Do not hesitate to use it if needed, this will immediately

stop the motor. To restart the machine after emergency stop button pushed, follow this procedure:

- Put the command buttons in central position.

- Rearm emergency stop.

- Command panel lamps must be lighted-up (green = correct / red = default).

- Engage the starter with the contact key.

- Resume spraying or pumping procedure.

202105-515-ENG User manual - X-PRO D140 P7

2. WARNING (continued)

2.2. TRANSPORT

• This machine was the object of a road homolagation (n°e2*2007/46/0673). As such, it must be

registered and can be thus dragged normally on the road network.

• The adjustable jockey wheel easily allows you to x the helm to the harness of your vehicle.

• The adjustable helm gives you the possibility of adjusting the machine horizontally.

• An electric cable provided with a grip allows you to link the device of lighting of the trailer with the

tractor truck.

• A cable of break allows to bind the device of harness of your vehicle with the machine in case of hanging

problem of the helm during a travel.

It is imperative to collide this cable on the harness of the vehicle.

Before any road travel:

• Check the pressure of the pneumatics which has to be 2.8 bar max.

• Check the tightening of the nuts of wheels.

• Check the tightening of the nuts of the articulated helm and the presence of pins.

• Clean reectors.

• Clean and check the functioning of the device of lighting.

• Collide the cable of break.

2.3. END OF LIFE OF THE PRODUCT

At its end-of-life, the machine must not be eliminated with the other household waste. The

uncontrolled elimination of waste can harm the environment or human health. Individuals are

invited to contact the distributor which sold them the product or to inquire with their city hall

to know where and how to get rid of the product so it can be recycled while respecting the

environment.

For any further information, please contact our hotline +33 4 42 29 08 96 or conseil@euromair.com.

Only are exempted from the obligation of brakes the only trailers under the double condition

that their total weight authorized in load does not exceed 750 kg nor half of the pure weight

of the truck tractor.

X-Pro D140 is not a transport trailer, it is strictly forbidden to transport people or products

related to the application of the machine.

User manual - X-PRO D140 202105-515-ENGP8

3. YOUR MACHINE

3.1. DESCRIPTION

Thermal engine machine for spraying shotcrete or pumping products such as liquid screed.

Made in Spain, it is equipped with a button control panel for simplied use, an automatic accelerator, motor

and hydraulic pump with adjustable ow-rate.

The safety devices comply with the standards in place and the hydraulic circuits are protected against

possible blockages of the rotating elements. An air cooler ensures that the oil temperature is maintained

within the correct range.

3.2. TECHNICAL CHARACTERISTICS

Motor Kohler KDW 1404

Motor power 19 kW

Fuel Gasoil

Diesel tank 25 L

Cooling liquid

Speed of rotation 2600 RPM

Number of cylinders 4

Consumption 4,1 L/h

Hydraulic system 40 L

Engine monitoring panel complete

Hydraulic controls electrical/manual

Pump speed setting yes

Automatic accelerator control yes

Hopper capacity 190 L

Variable ow up to 14 m3/h

Pressure from 0 to 30 bar

Maximum grain size up to 8 mm

Pump 60R12

Pump reverse operation yes

HP washer max pressure 140 bar

HP washer ow-rate 11 L/min

Overall length with tow bar 3,66 m

Overall length without tow bar 3,28 m

Overall width 1,24 m

Height at the highest point 1,28 m

Weight when full with oil and diesel 720 kg

Delivery height 80 m

Max. hose length 120 m

Delivered with

- a Ø50 x 20 m hose

- two cleaning balls Ø50

- a grease pump with a grease cartridge

- a complete high pressure washer lance

- a 10 m high pressure washer hose

- a storage carry-case

9 8

202105-515-ENG User manual - X-PRO D140 P9

3. YOUR MACHINE (continued)

3.3. IDENTIFICATION OF THE COMPONENTS

1Hydraulic oil level 7Adjustable pump

2Engine oil level 8Product pressure control manometer

3Electric circuit breaker 9Pump outlet

4Motor ange lubricator 10 Jockey wheel

5Diesel tank cap 11 Hood clips

6Hopper vibrator 12 Emergency stop

22 23

13c 13e

13a

13b 13d

User manual - X-PRO D140 202105-515-ENGP10

3. YOUR MACHINE (continued)

3.3. IDENTIFICATION OF THE COMPONENTS (continued)

13 Diesel engine display

13a Low fuel level (diesel).

13b Battery (lights up when the alternator does not charge

the battery).

13c Oil (lights up when oil pressure is insufcient).

13d Cooling liquid (lights up when the maximum operating

temperature is reached and causes the engine to stop).

13e Pre-heating (switches off when the pre-heating

temperature is reached).

14 Hour meter

15 Switching on the machine and starting the engine

16 Washer circuit pressure manometer

Maximum pressure 150 bar.

17 Screw hopper circuit pressure manometer

Maximum pressure 250 bar.

18 Flow rate adjustment indicator

Maximum pressure 25 bar.

19 Flow rate adjustment knob

To be adjusted according to the type of product used.

Product pump rotation control switch

Reverse: right position with spring return to the centre.

Stop: centre position.

Forward: left position maintained.

21 HP washer switch: On (right position) / Off (left position)

22 Hopper vibrator control

23 Remote control plug

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EUROPRO Pompe à eau

EUROPRO

EUROPRO HYDROPRO 800 Premium Manuel utilisateur

EUROPRO

EUROPRO X-Pro D200 Manuel utilisateur

EUROPRO

EUROPRO HYDROPRO 600 Manuel utilisateur

EUROPRO

EUROPRO MIXPRO 28 Manuel simple

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur