EUROPRO MIXPRO 28 Manuel simple

MIXING PUMP

MIXPRO 28

MANUAL INSTRUCTIONS

ORIGINAL INSTRUCTIONS

Revision n…… of ……

EUROPE PROJECTION - Z .I. Rousset Parc Club - 343, avenue Francis Perrin - 13106 Rousset

Tél : 00 33 (0)4 42 29 08 96 –Fax : 00 33 (0)4 42 53 44 36

SAS au capital de 400 000€ - SIREN 394 961 510 –NAF 2892 Z

Edition du 01/03/2021

 Instruction Manual Mixer Plus Mixer Technology srl pag.2 
 
 
GENERAL INDEX 
CE MARKING ..................................................................................................3 
FINAL TESTING AND COMMISSIONING...............................................................3 
RESERVED RIGHTS .........................................................................................3 
DECLARATION OF CONFORMITY ........................................................................4 
TECHNICAL DATA............................................................................................5 
DIMENSIONS OF THE MACHINE.........................................................................5 
PARTS LIST....................................................................................................6 
PACKAGING ...................................................................................................8 
UNPACKING ...................................................................................................9 
USE DESTINATION ..........................................................................................9 
DISPOSAL......................................................................................................9 
MACHINE TRANSPORT ................................................................................... 10 
SAFETY INSTRUCTIONS ................................................................................. 11 
RESIDUAL RISKS .......................................................................................... 12 
FORESEEABLE INCORRECT USE....................................................................... 12 
ASSEMBLING OF ROTOR AND MIXER................................................................ 13 
WATER CONNECTION .................................................................................... 13 
CONNECTION OF THE MATERIAL CONVEYING TUBE............................................ 14 
CONNECTION OF THE MATERIAL CONVEYING AND AIR TUBES TO THE SPRAYING 
NOZZLE....................................................................................................... 14 
ELECTRICAL CONNECTIONS............................................................................ 15 
CONTROL PANEL (2021 version)...................................................................... 17 
CHECKS BEFORE SWITCHING ON .................................................................... 18 
MACHINE PREPARATION ................................................................................ 19 
SPRAYING OF THE MATERIAL.......................................................................... 20 
WORK BREAK ............................................................................................... 20 
CLEANING OF CHAMBER MIXING ..................................................................... 21 
CLEANING THE HOPPER ................................................................................. 21 
CLEANING THE MATERIAL HOSE...................................................................... 21 
CLEANING OF THE SPRAYING NOZZLE AIR TUBE................................................ 22 
SWATER DRAINAGE DURING WINTER PERIOD................................................... 22 
RESEARCH OF MALFUNCTIONS ....................................................................... 23 
ROUTINE MAINTENANCE ................................................................................ 25 
WARRANTY .................................................................................................. 26 
 
 
 

Instruction Manual Mixer Plus Mixer Technology srl pag.3

CE MARKING

FINAL TESTING AND COMMISSIONING

(by the Manufacturer or the authorized Dealer)

The machine is already tested at the Manufacturer's premises.

The commissioning of the machine at the client is carried out by Manufacturer

or the Authorized Dealer.

At the end of the testing, the Manufacturer or Authorized Dealer fills in the

testing and commissioning certificate, which is signed by the testing

technician, the operator in charge (or any other authorized operator), and by

the safety manager, who shall certify the positive result of the same.

RESERVED RIGHTS

The contents on this manual can’t be reproduced and disclosed (totally or

partially) without written authorization of the Manufacturer.

Instruction Manual MIXPRO 28 EUROPRO pag.4

EUROPE PROJECTION

228 Avenue Olivier Perroy, 13790 Rousset

Tél : 00 33 (0)4 42 29 08 96

Fax : 00 33 (0)4 42 53 44 36

SAS au capital de 400 000€

SIREN 394 961 510 –NAF 2892 Z

DECLARATION OF CONFORMITY

In accordance with the Directive 2006/42/CE –D.Lgs 17/2010

DECLARES UNDER ITS OWN RESPONSIBILITY THAT THE MACHINE

Type : MIXPRO 28

Year of construction: 2021

It’s conformed to the following European Directives and the following modifications:

▪Directive 2006/42/CE, recognize in Italy with D.Lgs. 17/2010 (Machinery

Directive)

▪Directive 2014/35/CE (Low Voltage Directive) recognize in Italy with D.Lgs. 19

Maggio 2016, n. 86

▪Directive 2014//30/CE (Electromagnetic Compatibility)

And the following standards:

▪EN 60204-1:2016 Safety standard of the electrical equipment of machines

▪EN 12100-1 and 2 Machinery Safety –Essential concepts, main design

principles

The technical dossier is kept by Manufacturer.

Signed

Instruction Manual MIXPRO 28 EUROPRO pag.5

TECHNICAL DATA

The models available of the machine: MIXING PUMP MIXPRO 28

MODELS

POWER SUPPLY

WATER SUPPLY

E.W.I.

230 v –50 Hz

Water

MORTAR 2.2 KW

230 v –50 Hz

Water

MORTAR 3 KW

230 v –50 Hz

Water

FLOOR SCREED

230 v –50 Hz

Water

Protection grade of switchboard: IP44

Hopper capacity: 70 litres

Water pump flow rate: 8-26 litres/min

Max. served distance: 40 meters

Flow meter: digital

Weighted noise pressure level “A”: 92 dB

DIMENSIONS OF THE MACHINE

MODEL

DIMENSIONS (cm)

WEIGHT (without tubes)

MIXPRO 28

A=98 B=72 C=153

145 kg

A= Height B= Width C= Depth

Instruction Manual MIXPRO 28 EUROPRO pag.6

Instruction Manual MIXPRO 28 EUROPRO pag.7

PARTS LIST

1) Electric panel

2) Holder frame compressor

3) Holder frame electric panel and

hydraulic installation

4) Water pipe

5) Numeric flow meter

6) Water drainage outlet installation

7) Regulate water valvea

8) Frame left wheels SX

9) Wheels

10) Main power supplì switch

11) Chamber toolholder

12) Gearmotor assembly locking

device

13) Outlet long distance command

14) Connection outlet material

15) Stator

16) Water inlet in the mixing chamber

( light products)

17) Water inlet in the mixing chamber

( all products , except light ones)

18) Water line pression guage

19) Bag cutting blade

20) Gearmotor power suppli plug

21) Compressor

22) Main power suppli plig

23) Command and control panel

24) Compressor power plug

25) Water pump

26) Service tap

27) Frame right wheels

28) Water pipe L=16m ( equipped with fast

connection)

29) Material output pressure

30) Connection air outlet

31) Polyurethane mixing chamber

32) Pivot group gearmotor

33) Mixing group gearmotor

34) Flange group gearmotor

35) Material hopper

36) Hopper frame

37) Stator locking tie

38) Connection inlet water pump

39) Material transport tube L=15 (

equipped whit lever connection)

40) Hose of protection

41) Hopper protection grating

Instruction Manual MIXPRO 28 EUROPRO pag.8

PACKAGING

Usually the machine is packaged by the Manufacturer on wooden pallet,

fastened with straps and wrapped with a film.

List of supplied loose components:

No. 1 Mixer;

No. 1 Rotor;

No. 1 “T” wrench for the assembly of rotor and cleaning the mixing chamber;

No. 1 Power supply cable without plug socket (L=20)

No. 1 Water tube (ext. ø 26 mm - L= 40 m); No. 1 Spraying gun;

No. 1 Material conveying tube (ext. ø 39 mm - L= 15 m) (only for mod. TOP);

No. 1 Air tube (ext. ø 19 mm - L= 16 m)(only for mod. TOP);

No. 1 Strike material conveying tube (variable section) L=20m (mod.EWI)

No. 1 Air tube ( L= 21 m)( mod. EWI);

Components positioned in the tool carrying box

No. 1 Instructions for use and maintenance;

No. 1 "Anti-grip" liquid bottle with sprayer (for rotor assembling);

No. 1 Rod cleaner; No. 1 Screwdriver;

No. 2 Water tube connections;

No. 2 Water tube bands;

No. 2 Bands (reductions) fro water inlet (;” 3/4)

No. 1 Air tube equipment cleaner spray gun;

No. 2 Rubber spare parts distributor for spray gun;

No. 2 Balls in rubber-sporge for the cleaning of the material conveying tube;

No. 1 Fast connection for the cleaning of the material conveying tube;

Instruction Manual MIXPRO 28 EUROPRO pag.9

UNPACKING

1) Remove the protective film;

2) Remove the above components from the hopper protection grid

3) With a proper tool, cut the straps paying attention not to be hit by the

same due to their elasticity;

4) With the help of a second operator, let the machine carefully get off the

pallet lifting it using the proper handles positioned on the machine sides;

USE DESTINATION

The machine has been designed and manufactured for the following destination

of use:

Any other different use is potentially inappropriate.

DISPOSAL

At the disposal time of the machine, compulsorily observe the provisions of the

regulations in force.

Separate the parts making up the machine according to the different

construction materials (plastic, copper, iron, etc...).

Lubricant liquids and any other fluids shall absolutely not be dispersed in the

environment.

DESTINATION

OF USE

Building sector.

PLACE OF

WORK

Building site, iside or outside sufficiently lightted

and suita-ble buldings complying with the

regulations in force in the country of use on safety

and health on work positions. The machine has to

lean on a surface assuring its stability whit

reference to its weight and its overrall dimen-sions

FORESEEN

USE

Mixing and spraying of pre-mixed products having

a max. granulometry of 3 mm, suitable for

plastering and mechanical processing.

CHARGED

WITH THE

USE

A single authorized operator meeting the

professional requi-rements described in par.

Instruction Manual MIXPRO 28 EUROPRO pag.10

MACHINE TRANSPORT

In the drawing are visible the coupling points for the transport and handling of

the machine.

Table des matières

Autres manuels EUROPRO Pompe à eau

EUROPRO

EUROPRO X-Pro D200 Manuel utilisateur

EUROPRO

EUROPRO X-Pro D140 Manuel utilisateur

EUROPRO

EUROPRO HYDROPRO 600 Manuel utilisateur

EUROPRO

EUROPRO HYDROPRO 800 Premium Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur