EUPRY P1T Manuel utilisateur

User Guide

October 2021

External Temperature Sensor Plug

(P1T)

User Guide: External Temperature Sensor, P1T

Rev. 1.1 -October 2021 Page 1 of 7

1 Copyrights & Trademarks

Speciﬁcations and guides are subject to change without notice. Eupry is a registered trademark of

Eupry ApS. Other brands and product names are trademarks or registered trademarks of their

respective holders.

No part of the speciﬁcations and guides may be reproduced in any form or by any means or used to

make any derivative such as translation, transformation, or adaptation without permission from Eupry

www.eupry.com

2 Statements

Legal entity:

Eupry ApS

Dortheavej 59, 3.

2400 Copenhagen NV

Denmark

VAT: 30536665

Tlf. +45 53 51 77 00

Mail: hello@eupry.com

Product is certiﬁed to CE standard and complies to all relevant CE-standards, as well as RoHs standard.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the

separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or

modiﬁcations not expressly approved by Eupry could void the user’s authority to operate this equipment according to part

15 of the FCC rules.

User Guide: External Temperature Sensor, P1T

Rev. 1.1 -October 2021 Page 2 of 7

Content
Copyrights & Trademarks 2
Statements 2
Content 3
Introduction 4
Speciﬁcations 4
Setup of Eupry External Temperature Sensor 5
Identiﬁcation of devices 5
Appendix FAQ 6
1 I have got multiple alarms during the connection process 6
2 I have gotten a new external sensor and now I get more alarms 6
3 The light does not turn on when I press the Eupry Button 6
4 The logger does not light green when I release the button 6
5 Where can I see the ID of the Data Logger and ID of the External Sensor? 6
Support 6
User Guide: External Temperature Sensor, P1T
Rev. 1.1 -October 2021 Page 3 of 7
Eupry ApS | Dortheavej 59. 3. | 2400 Copenhagen | www.eupry.com/ | +45 53 51 77 00 |support@eupry.com

4 Introduction

The following is a manual for the external temperature sensor, P1T. The unit works with Eupry’s data loggers, and all data can

be viewed on the online platform, Eupry Logger.

5 Speciﬁcations

Temperature Operating Range

-50°C to +50°C (-58°F to 122°F)

Temperature Resolution

0.01°C (0.018°F)

Temperature Accuracy

Dependent on Calibration

Typical Temperature Accuracy

±0.1°C (0.018°F) [@ –20°C to +50°C]

±0.3°C (0.54°F) [@ –50°C to +50°C]

Temperature Repeatability (Precision)

±0.01°C (0.018°F)

Temperature Drift/Year

±0.03°C (0.054°F)

Thermal Response Time (τ)

60s

Sensor Type

Digital / Silicon bandgap sensor

Certiﬁcations

CE & ROHS

Identiﬁcation

Unique GS1 GRAI Code

Diameter

11mm

Length (Installed)

22mm

Length (Total)

33mm

Unit Weight

User Guide: External Temperature Sensor, P1T

Rev. 1.1 -October 2021 Page 4 of 7

6 Setup of Eupry External Temperature Sensor

Connecting to your Eupry Data logger

Connect the External Temperature Sensor to the socket on the top face of a data logger. Make sure that the sensor is ﬁrmly

pressed all the way in until you hear a clicking sound or feel a haptic feedback.

7 Identiﬁcation of devices

All Eupry External Temperature Sensors have two forms of identiﬁcation:

Unique serial number

A unique serial number of the External Temperature Sensors is written as text on the label of the sensor and can be used to

identify the unit in Eupry’s system.

Unique GRAI code datamatrix

A unique GRAI code identiﬁcation, which also includes the serial number of External Temperature Sensor is placed on the

label of the External Temperature Sensor as a data matrix.

The entire GRAI code (GS1 standard) uniquely identiﬁes the sensor internationally and can be used with GRAI compliant

systems.

The last 8 digits of the GRAI-code contains the unique serial number of the Sensor and can be used to identify the unit in

Eupry’s system.

User Guide: External Temperature Sensor, P1T

Rev. 1.1 -October 2021 Page 5 of 7

8 Appendix FAQ

8.1 I have got multiple alarms during the connection process

It is completely normal to get alarms during these processes as the sensors you are connecting are at room temperature

when ﬁrst plugged in. Be aware, that you do not continue to get these alarms.

8.2 I have gotten a new external sensor and now I get more alarms

The new externally calibrated sensors are more accurate and react faster, therefore, it is also normal to get more alarms.

Therefore, it is advisable to expand the alarm limits. However, greyzone alarms are not affected by this.

To change the limits go to eupry.com/logger, and change the critical high and critical low settings for your alarms.

8.3 The light does not turn on when I press the Eupry Button

Look at the user manual for the data logger on support.eupry.com.

8.4 The logger does not light green when I release the button

Look at the user manual for the data logger on support.eupry.com.

8.5 Where can I see the ID of the Data Logger and ID of the External Sensor?

We have two kinds of barcode labels. The two pictures below illustrate where the ID can be found.

The ID of this Data Logger is the last four digits on the side of the Data Logger. The ID of the sensor is the digits on it (see

ﬁgure).

The ID of this Data Logger is the last ﬁve digits on the side of the Data Logger. The ID of the sensor is the digits on it (see

ﬁgure).

User Guide: External Temperature Sensor, P1T

Rev. 1.1 -October 2021 Page 6 of 7

9 Support

Please visit the Eupry Support Centre for any support enquiries. This can be accessed by selecting the “Support” button when

logged in to the Eupry Logger.

Alternatively, please contact support using the information provided in the footer.

User Guide: External Temperature Sensor, P1T

Rev. 1.1 -October 2021 Page 7 of 7

Table des matières

Autres manuels EUPRY Régulateurs de température

EUPRY

EUPRY P2T Manuel utilisateur

Manuels Régulateurs de température populaires d'autres marques

Swegon

Swegon LUNAd MB Manuel utilisateur

Lucky Reptile

Lucky Reptile Thermo Control II Manuel utilisateur

SENSORMETRIX

SENSORMETRIX Argon 100 Manuel utilisateur

Fuji Electric

Fuji Electric PXE4 Manuel utilisateur

Yuyao gongyi

Yuyao gongyi XMT-808 series Manuel utilisateur

Selec

Selec TC544C Manuel utilisateur

P.W. KEY

P.W. KEY rt-208gt Manuel utilisateur

Future Design

Future Design FDC-9200 Manuel utilisateur

BH Thermal

BH Thermal BriskONE Manuel utilisateur

Omron

Omron E5EX-H Manuel utilisateur

West Control Solutions

West Control Solutions KS 45 Guide de démarrage rapide

MCS

MCS RITC-15B Manuel utilisateur

SMC Networks

SMC Networks Thermo-con INR-244-639 Manuel utilisateur

eltherm

eltherm Ex-TC It Series Manuel utilisateur

Omron

Omron C200H-TV Series Manuel utilisateur

industrie technik

industrie technik CA1 Manuel utilisateur

KRAL

KRAL EET 32 Manuel utilisateur

dixell

dixell XR420C Schéma de câblage