ETOE A1332 Manuel utilisateur
Projector A1332
User Manual
DE
EN
01 - 14
15 - 28
ES
JP
29 - 42
43 - 56
Catalog
English
Deutsch
Español
日本語
Read all instructions before you use this device. Do not make any changes
that are not described in this manual. If physical injury, loss of data, or
damage is caused by failure to follow instructions, the warranty does not
apply.
Setup
• To reduce the risk of fire and/or electric shock, do not expose the device
to rain or moisture, and objects filled with liquids, such as vases, should
not be placed on the device.
• Do not place the device on soft surfaces such as tablecloths or carpets
as doing so could be a fire-hazard.
• Do not place the device in areas susceptible to excessive dust and dirt or
near any appliance generating a strong magnetic field.
• To prevent overheating, do not block or clog the ventilation openings.
Never place the device in a confined space. Always leave enough space
around the device for ventilation.
• Protect the device against direct sunlight, heat, large temperature
fluctuations and moisture.
• When the device runs for a long period of time and the surface becomes
hot, shut it down and unplug the power cord. Resume operation only after
the device has cooled.
• Always handle the device with care. Avoid touching the lens.
• Never place heavy or sharp objects on the device or the power cord.To
avoid electric shock, do not disassemble.
• Only use attachments or accessories specified by the manufacturer.
Avoid extreme vibration. It may damage the internal components.. Do not
allow children to handle the device without supervision.
• Under the following conditions, a layer of moisture can appear inside the
device which can lead to malfunctions:
a) if the device is moved from a cold to a warm area;
b) after a cold room is heated;
c) when the device is placed in a damp room.
To avoid any moisture, seal the device in a plastic bag before moving it
to another room, and wait for one to two hours before you take it out of
the bag.
Safety Instructions
EN 01
Power Supply
Hearing Safety
Cleaning
Repairs
Caution
• Use only the provided power adapter.
• Power off the device before removing the power supply from the socket.
• Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from this
device.
• Unplug this device if there are lightning storms or when unused for a
long period of time.
• Where the power plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
• Before you make or change any connections, ensure that all devices are
disconnected from the power outlet.
• Do not touch the power cable or the power connector with wet hands.
• Power off the device and remove it from the power supply before cleaning
the surface.
• Use a soft, lint-free cloth. Never use liquid, gaseous, or easily flammable
cleansers (like sprays, abrasives, polishes, and alcohol). Wipe over the
surfaces gently. Be careful that you do not scratch the surfaces.
• Do not use any liquid cleaning agents to clean the lens as they may
damage the protective coating on the lens. Use lens cleaning paper to
clean the lens of the projector.
• Do not make any repairs to the device by yourself. Only have your device
repaired by an authorized service center.
• Improper maintenance can result in injuries or damage to the device.
• Refer all servicing to qualified service personnel.
• Do not stare at operating beam, the bright light may hurt your eyes.
To avoid hearing damage, do not listen for extended periods at high volume.
Set the volume at a safe level.
EN 02
User manual x 1
Adapter x 1
Remote control x1
Projector x 1 Adapter AC cord x 1
Overview
Projector
Air ventilation
Tof (Auto focus)
Tripod screw hole
DC -in
Lens
USB port
HDMI Port
IR receiver
①
②
③
Back cover
⑩
④
⑤
⑥Aux Port
⑨
⑦
⑧
Front View Rear View
3
4
6
51
1
2 7 8
9
10
• Please do not look into the lens directly to avoid harm for your eyes.
• Please do not block the air ventilation.
Attention:
User Manual
What’s Included
EN 03
Mutes the projector’s audio
Press to confirm a selection or entry
Navigate menus or adjust the selected content
When playing videos/music:
Press / button to volume up / down
Long-press / button to fast forward / backward
Return to the previous menu
Activate Google assistant, Google's
voice-powered virtual assistant service
Press the button for once, go to
Android TV homepage
Volume down / up
Preset Netflix button
Preset Prime Video button
• Adjust the focus for the projector
• Long-press to launch the projector's on-screen
settings menu
Press the button once, go to projector Homepage
1
2
3
4
5
6
7
8
9
10
11
12
•Press the button once: power on
• Press the button twice: power off
3
4
7
8
10
12
9
11
2
6
5
1
EN 04
Get Started
Placement
①Place the projector right towards the projection surface to get a
rectangle picture.
②The distance between the projector and the projection surface
determines the picture size.
③Check the projection distance and screen size on the specifications part.
Prepare the Remote Control
Install the remote control batteries (batteries not
included).
①Press and open the battery cover, as illustrated.
②Install two AAA batteries. Make sure that the
positive and negative ends are positioned
correctly, as illustrated.
③
④The distance between the remote and the projector
should not exceed 10 m / 33 ft.
Place the battery cover back until it clicks into place.
• Press the power button once to power on.
• Press the power button twice to power off.
Power On
1.1m 4.1m
40" 150"
4
2
1
3
EN 05
You can also manually focus through the remote control. Press the button
on the remote control, and press the or button, until the picture is clear.
When start the projector for the first time, you will be guided to a page to
select language, use remote control or to select your language. Then
press the right button and select "Complete" to enter the next page.
Focus
Place the projector towards a suitable projection surface or wall, the projector
will automatically focus the image.
After selecting a language, you will be at a Bluetooth remote pairing page,
follow the instructions on the page.
①Please hold the remote near the projector.
②Press the [Volume-] and [OK] keys together for about 10 seconds.
③When the screen shows "Connected", your remote LED indicator
turns blue, and the remote control is paired
Select Your Language
Pair Remote Control in Bluetooth Mode
Auto Focus
Manual Focus
Note：The projection distance must between 1.1m to 4.1m.
EN 06
Follow the setup wizard on Android TV, select your language, set up a Wi-Fi
connection, sign in to a Google account, and carry out other related
procedures.
When you complete the Android TV setup wizard, the Android TV home
screen will appear. Now you can start watching your favorite shows by
downloading streaming apps.
Set up Android TV
EN 07
Table des matières
Langues :
Autres manuels ETOE Projecteur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
