ETIC XSLAN+ Series Manuel utilisateur

DOC_DEV_XSLAN+_User guide_B

XSLAN+

SHDSL Switch

_________________

USER GUIDE

_________________

Page 2 DOC_DEV_XSLAN+_User guide_B

The XSLAN+ SHDSL switch is designed and manufactured by

ETIC TELECOM

13 Chemin du vieux chêne

38240 MEYLAN

FRANCE

TEL : + (33) (0)4-76-04-20-05

E-mail : hotline@etictelecom.com

web : www.etictelecom.com

DOC_DEV_XSLAN+_User guide_B Page 3

DECLARATION OF CONFORMITY

The manufacturer, ETIC Telecom –13 chemin du vieux chêne –38240 Meylan –France, Hereby declares

under sole responsibility that the listed products conform to

-the Electromagnetic Compatibility (EMC) Directive 2014/30/UE ,

-the Low Voltage Directive (LVD) 2014/35/UE ,

-the Restriction of the use of certain Hazardous Substances (RoHS) Directive 2011/65/UE.

Type of product: SHDSL switch

Models:

XSLAN+140

XSLAN+1400, XSLAN+1220, XSLAN+1230, XSLAN+1260, XSLAN+1261

XSLAN+2400, XSLAN+2220, XSLAN+2230, XSLAN+2260, XSLAN+2261

XSLAN+BP2400, XSLAN+BP2220, XSLAN+BP2230, XSLAN+BP2260, XSLAN+BP2261

XSLAN+4400, XSLAN+4220, XSLAN+4230, XSLAN+4260, XSLAN+4261

The harmonized standards to which these products comply are:

Standard

Title

EN 61000-6-2 2006

Immunity:

EN61000-4-2 Electrostatic Discharge

EN61000-4-3 RF Radiated Immunity

EN61000-4-4 EFT/Burst Immunity

EN61000-4-5 Surge Immunity

EN61000-4-6 RF Conducted Immunity

EN61000-4-8 Power Frequency Magnetic Field Immunity

EN 61000-6-4 2007

A1/2011

Emission:

EN55022 Radiated and conducted emission

EN 60950-1/A2 2014

Safety and Health

Date : 11th October 2017

Philippe Duchesne

Technical Director

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

TABLE OF CONTENTS 
DOC_DEV_XSLAN+_User guide_B Page 5 
 
OVERVIEW.....................................................................................................................................7 
1Purpose of this manual .................................................................................................................................... 7 
2Products identification ..................................................................................................................................... 7 
3Specifications.................................................................................................................................................... 8 
4Product overview ............................................................................................................................................10 
4.1 XSLAN+1XXX....................................................................................................................................... 10 
4.2 XSLAN+2XXX....................................................................................................................................... 10 
4.3 XSLAN+4200........................................................................................................................................ 12 
5Highlighted features ....................................................................................................................................... 14 
5.1 STU-C / STU-R auto-negotiation ......................................................................................................... 14 
5.2 Redundancy solutions: RSTP and proprietary failsafe ring............................................................... 14 
5.3 The by-pass function........................................................................................................................... 15 
5.4 The loop VPN function ........................................................................................................................ 15 
5.5Other functions of the XSLAN+ family ............................................................................................... 16 
INSTALLATION ...........................................................................................................................17 
1Description ...................................................................................................................................................... 17 
1.1 Dimensions .......................................................................................................................................... 17 
1.2 Connectors........................................................................................................................................... 17 
1.3 Push button.......................................................................................................................................... 22 
1.4 LED indicators......................................................................................................................................23 
2Safety instructions.......................................................................................................................................... 24 
3DIN rail mounting ............................................................................................................................................ 25 
4Cooling............................................................................................................................................................. 25 
5Power supply................................................................................................................................................... 25 
6Isolation and earthing..................................................................................................................................... 26 
7RS232 serial connection (XSLAN+X220 or XSLAN+X230) .......................................................................... 26 
8RS485 serial connection (XSLAN+X220) ...................................................................................................... 26 
9RS422 isolated serial connection (XSLAN+X260) ........................................................................................ 27 
10 RS485 isolated serial connection (XSLAN+X261) .................................................................................... 28 
11 Digital input and output............................................................................................................................... 29 
12 Preparing and checking the line ................................................................................................................. 29 
12.1 Type of cable....................................................................................................................................29 
12.2 Crosstalk interference ..................................................................................................................... 30 
12.3 Shield earthing ................................................................................................................................. 30 
12.4 Protecting the SHDSL switch from lightning.................................................................................. 30 
13 Connecting the XSLAN+ to the line............................................................................................................ 30 
13.1 General precautions......................................................................................................................... 30 
13.2 Point to point connection using two, three or four twisted pairs.................................................. 31 
13.3 Daisy chain or ring connection........................................................................................................ 31 
13.4 By-pass function .............................................................................................................................. 31 
PREPARING THE SETUP............................................................................................................33 
1Connecting a PC for configuration ................................................................................................................ 33 

TABLE OF CONTENTS

Page 6 DOC_DEV_XSLAN+_User guide_B

1.1 Overview............................................................................................................................................... 33

1.2 First configuration ............................................................................................................................... 34

1.3 Changing the configuration later ........................................................................................................ 34

2Temporary return to the factory settings ...................................................................................................... 35

3Restoring the factory settings........................................................................................................................ 35

4Protecting the access to the administration server...................................................................................... 36

5Configuration steps ........................................................................................................................................ 36

ANNEX 1 : SHDSL data rate versus distance...........................................................................37

OVERVIEW

DOC_DEV_XSLAN+_User guide_B Page 7

OVERVIEW

1Purpose of this manual

The present user guide describes the features and the installation of the XSLAN+ switches family (it also

applies to the switches family previously named XSRING+).

2Products identification

The XSLAN+ is an industrial Ethernet switch that provides 1 to 4 SHDSL ports to extend the Ethernet

transmission up to several kilometers using any existing copper pair.

The XSLAN+ switches family consists of these models :

XSLAN+1400, XSLAN+1220, XSLAN+1230, XSLAN+1260, XSLAN+1261

XSLAN+2400, XSLAN+2220, XSLAN+2230, XSLAN+2260, XSLAN+2261

XSLAN+BP2400, XSLAN+BP2220, XSLAN+BP2230, XSLAN+BP2260, XSLAN+BP2261

XSLAN+4200, XSLAN+BP4200

The main features are summarized hereafter :

XSLAN+ models

1400

12xx

2400

22xx

BP2400

BP22xx

4200

BP4200

SHDSL port

Max. data rate (Mb/s)

15.2

30.4

60.8

Ethernet port 10-100 Mb/s

RS232/RS485 *

By-pass

Failsafe ring

Serial gateway

raw, telnet, modbus,

unitelway

*Models with serial interface code :

RS232

RS485

RS422

isolated

RS485

isolated

OVERVIEW

Page 8 DOC_DEV_XSLAN+_User guide_B

3Specifications

Dimensions

136 x 48 x 138 mm (h, l, p)

Weight

Max 0.74 kg

Casing

Metallic

IP20 –IEC60529

DIN rail mounted

Temperature

Storage: - 40°/ + 85°C

Operating: - 40°/ + 70°C

Humidity

10 to 95 % (relative)

Power supply

2 power supply inputs

Reverse polarity protection

Nominal : 12-48 VDC (min 10 VDC - max 60 VDC)

Consumption

XSLAN+1400 or +12xx : 5W

XSLAN+2400 or +22xx : 6W

XSLAN+4200 : 9W

EMC

Susceptibility EN61000-6-2 :

ESD : EN61000-4-2 : 4 kV contact –8kV air

RF radiated : EN61000-4-3 : 10V/m < 2 GHz

Burst : EN61000-4-4

Surge : EN61000-4-5 : 4KV line / earth

RF conducted : EN61000-4-6

Magnetic fields : EN61000-4-8

Emission conducted and radiated :

EN 55022

Electrical safety

EN 60950-1

Hazardous materials

2011/65/UE (RoHS)

REACH

SHDSL

ITU-T G.991.2, 802.3ah : 2BaseTL (EFM)

Data rate: 192 kb/s to 15,2 Mb/s on 1 pair

Isolation 1500 V

Connection time: 45 s typical

STU-C / STU-R auto-negotiation

Latency

Frame transmission delay from one Ethernet port of an XSLAN+ to the Ethernet port of another

XSLAN+ through an SHDSL link : 4 ms at 5.6 Mb/s

Ethernet

10/100 Mb/s Half/Full duplex Auto MDI/MDIX

Switch

Store and forward - 1024 addresses MAC

Redundancy

RSTP - IEEE 802.1D / 802.1Q

Fail safe ring

Loop VPN

VLAN

IEEE 802.1Q

IP address

IPV4 and IPV6

IP router

Multicast and broadcast filtering

Static routes

RIP V2 - OSPF

OVERVIEW

DOC_DEV_XSLAN+_User guide_B Page 9

QOS

RFC 2474, 2475, 2597, 2598 « Differentiated services »

Traffic prioritization and bandwidth reservation

SNMP

Supported MIBS :

RFC1213-MIB (MIB-2)

HDSL2-SHDSL-LINE-MIB

HOST-RESOURCES-MIB / IF-MIB

IP-MIB

BRIDGE-MIB

RSTP-MIB

RS232-RS485 *

Asynchronous - 1200 à 115200 kb/s with or without parity

Gateway : Raw TCP client and server / UDP multipoint / Multicast / Telnet

Modbus / Unitelway

Date and time

NTP client and server

Log

Log with timestamp of the last 300 events

Syslog

Alarm

1 digital output

SNMP traps

Configuration

With HTML browser

* depending on models

OVERVIEW

Page 10 DOC_DEV_XSLAN+_User guide_B

4Product overview

The XSLAN+ switches family includes :

The products which can be connected to only one twisted pair.

They only provide one SHDSL interface.

The references of that products are XSLAN+1400 or XSLAN+12xx if they provide a serial port.

They are named XSLAN+1XXX hereafter.

The products which can be connected to two twisted pair.

They provide two SHDSL interfaces.

The references of that products are XSLAN+2400 or XSLAN+22xx if they provide a serial port.

They are named XSLAN+2XXX hereafter.

The products which can be connected to four twisted pair.

They provide four SHDSL interfaces.

The references of that products are XSLAN+4200.

4.1 XSLAN+1XXX

Point to point link on a single twisted pair

Two XSLAN+1XXX extend Ethernet over one

twisted pair.

The data rate is up to 5,7 Mb/s on 3,7 Km and 15

Mb/s on 0,7 Km (see table in Annex 1).

4.2 XSLAN+2XXX

Additional features compared to XSLAN+1XXX:

Point to point link on two twisted pairs

Two XSLAN+2XXX extend Ethernet over two

aggregated twisted pair.

The data rate is twice the data rate on a single

pair: up to 11,4 Mb/s on 3,7 Km and 30 Mb/s on

0,7 Km (see table in Annex 1).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ETIC Changer

ETIC

ETIC XSLAN-140 Manuel utilisateur

ETIC

ETIC XSLAN-1100 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur