ETI 8051 Manuel utilisateur

Light Meter 8051

Operating Instructions

order code: 825-505

INSTRUMENT OPERATION - Install the batteries provided. The unit is switched on/off

by pressing the ON/OFF button. For accurate measurements hold the unit horizontally

to the light source being measured. Please note: the light sensor can be rotated up to

270 °, do not rotate it past this point as this will damage the sensor. Press the Unit button

to switch between foot-candle Ftc and Lux measurements. If the unit displays 'OL' then

the unit is outside of its measurement range.

AUTO-OFF - This unit has a 20 minute auto-power off function. If you need to disable

this function press and hold the Unit button while the light meter is off. Continue holding

the Unit button and press the ON/OFF button, release the Unit button and 'AP on/oFF'

will be shown in the display. Press the Unit button to toggle between on and off. Switch

the unit off to confirm the auto-power off is disabled/enabled.

HOLD - Press the Func button once to display 'HOLD'. Once Hold is selected the last

reading is displayed. Press the Func button three times to return to normal readings.

MAX/MIN - To check the maximum or minimum light reading, press the Func button twice

to display 'Max' or press again until 'Min' is displayed. The unit will continually monitor

the reading which will change if the unit is left in a light source. Switching the unit off will

reset the max/min reading.

LCD BACKLIGHT - Press and hold the Unit button for three seconds and release, the LCD

will illuminate. The backlight will remain on for 60 seconds if not disabled by the user

within this time. To switch the backlight off press and hold the Unit button for three seconds.

BATTERY REPLACEMENT- Replace the batteries when the Battery symbol illuminates, using

three AAA or 1.5 volt equivalent.

EMC/RFI - Instrument performance may be affected if operated within a high frequency

radio field, such as a mobile phone, or if subjected to an electrostatic shock.

GUARANTEE - This instrument carries a one-year warranty against defects in either

components or workmanship. Full details of liability are available within ETI’s Terms

& Conditions of Sale at www.etiltd.com/terms. In line with our policy of continuous

development, we reserve the right to amend our product specification without prior notice.

825-505/13.03.14

supplied by

Electronic Temperature Instruments Ltd

Worthing · West Sussex · BN14 8HQ

tel: 01903 202151 · email: [email protected]

www.etiltd.com

range 0 to 30000 Lux or 0 to 2788 FC

resolution 1 Lux or 0.1 FC

accuracy ±4 % or ±50 digits

battery 3 x 1.5 volt AAA

battery life 20 hours

display custom 37 mm LCD

dimensions 30 x 60 x 121 mm

weight 150 grams

SPECIFICATION

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels ETI Instrument de mesure

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur