EtherWAN EX42908 series Manuel utilisateur

W70G-EX42908Q1 Page 1

Installation Guide

EX42908 | Hardened Unmanaged Switch

1Unpacking

Open the carton and unpack the items. Your package

should include:

▪One EX42908 or EX42917 switch

If any items are missing or damaged, notify your

EtherWAN representative. If possible, save the carton

and packing material in case you need to ship or store

the switch in the future.

2Equipment Needed

▪Category 5 or better cable for RJ-45 ports

▪Appropriate fiber cable for fiber ports

3Select a Location

▪Installation: DIN rail. Place the device on the DIN

rail from above using the slot. Push the front of

the device toward the mounting surface until it

audibly snaps into place.

▪Choose a dry area with ambient temperature

between -40 and 75°C (-40 and 167°F).

▪Keep away from heat sources, sunlight, warm air

exhausts, hot-air vents, and heaters.

▪Be sure there is adequate airflow.

4Connect to the Data Ports

Depending on the model, your switch can have the

following ports:

▪7 or 8 10/100/1000BASE-T ports

▪0 or 1 1000BASE-X fiber port

5Connect Power

Power is supplied via a 12-48VDC terminal block

connected to a DC power cord. The terminal block has

7 terminal posts. Power consumption is 2.47W Max.

State

Description

Power 1

12-48VDC

Power Ground

Power 2

12-48VDC

Power Ground

Earth Ground

Relay Output Rating

0.6A @ 30VDC

Power-Up Sequence

When the switch is powered up:

▪All Link/ACT LEDs blink momentarily.

▪The Power LED lights up and stays lit.

▪LEDs for every port connected to a device will

flash, as the switch conducts a brief Power On Self-

Test (POST).

6Port Status LED Indicators

LED

State

Description

Power 1, 2

(Green)

Switch is powered ON

correctly

Off

Switch is not receiving power

Alarm (Red)

Relay alarm on

Off

Relay alarm off

Gigabit Ports

Link/Act

(Green)

Valid network connection

established.

Off

No link.

Blinking

Transmitting or receiving data

W70G-EX42908Q1 Page 2

Installation Guide

EX42908 | Hardened Unmanaged Switch

7DIP Switch Settings

8DIN Rail Installation

DIN-Rail Assembly Startup, and Dismantling

▪Assembly: Place the Switch on the DIN rail from

above using the slot. Push the front of the Switch

toward the mounting surface until it audibly snaps

into place.

▪Startup: Connect the supply voltage to start up the

Switch via the terminal block.

▪Dismantling: Pull out the lower edge and then

remove the Switch from the DIN rail.

Manufacturer information:

EtherWAN Systems, Inc.

33F, No. 93, Sec. 1, Xintai 5th Rd., Xizhi Dist., New

Taipei City, 221 Taiwan

DIP

Off

1~8

Port 1~8 Alarm

Enable

Port 1~8 Alarm

Disable

The full product manual can be downloaded from:

www.etherwan.com

Autres manuels EtherWAN Changer

EtherWAN

EtherWAN InfraGreEn IG5 Manuel utilisateur

EtherWAN

EtherWAN EX87000 Series Manuel utilisateur

EtherWAN

EtherWAN EX19162A Manuel utilisateur

EtherWAN

EtherWAN OttoE TF100 Sereis Manuel utilisateur

EtherWAN

EtherWAN EX19164 Manuel utilisateur

EtherWAN

EtherWAN EX19164A Manuel utilisateur

EtherWAN

EtherWAN EG97023 Series Manuel utilisateur

EtherWAN

EtherWAN OttoE TG103 Series Manuel utilisateur

EtherWAN

EtherWAN EX46910F Manuel utilisateur

EtherWAN

EtherWAN EX32008 Series Manuel utilisateur

EtherWAN

EtherWAN EX33000 Series Manuel utilisateur

EtherWAN

EtherWAN EX42008 Series Manuel utilisateur

EtherWAN

EtherWAN EX41941 Manuel utilisateur

EtherWAN

EtherWAN EX83000 Manuel utilisateur

EtherWAN

EtherWAN EX48000A Series Manuel utilisateur

EtherWAN

EtherWAN EX76000 Series Manuel utilisateur

EtherWAN

EtherWAN EX78900E Series Manuel utilisateur

EtherWAN

EtherWAN EX33000 Series Manuel utilisateur

EtherWAN

EtherWAN ER58000 Series Manuel utilisateur

EtherWAN

EtherWAN EX32905 Series Manuel utilisateur

EtherWAN

EtherWAN EX42300 series Manuel utilisateur

EtherWAN

EtherWAN EX61000A Manuel utilisateur

EtherWAN

EtherWAN EX46900A Series Manuel utilisateur

EtherWAN

EtherWAN EX62000 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur