EtherWAN EX17008 Manuel utilisateur

8/16-port 10/100Base Fast Ethernet Web-Smart PoE Ethernet Switch

This quick start guide describes how to install and use the 8-port 10/100Base Fast Ethernet Web-Smart

PoE Ethernet Switch. This is designed to provide power to PoE driven devices.

Physical Description

The Port Status LEDs and Power Inputs

LED State Indication

10/100Base-TX

Steady A valid network connection established.

Link/ACT Flashing Transmitting or receiving data.

ACT stands forACTIVITY.

Steady Power Device (PD) is connected.

PoE Off Power Device (PD) is disconnected.

Functional Description

•Supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE).

•Full PoE Power supplies up to 15.4W per port.

•1024 MAC addresses. 512K bits buffer memory.

•PoE (Power status, Link status) through the Web browser interface.

•Administrator, Port Management, VLAN Setting, Per Port Counter, Trunk Setting, QoS Setting,

Security Filter, Configuration Backup/Recovery, and Miscellaneous through the Web browser

Interface.

•10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX.

•Full wire-speed forwarding rate.

•100~240VAC, 50~60Hz Internal Universal PSU.

•0 to℃45 (℃32℉to 113℉) operating temperature range.

•Metal case. Supports Desktop and Rack Mounting installation.

•The ITE is to be connected only to PoE networks without routing to the outside plant.

Web Configuration

•Login the switch:

Specify the default IP address (192.168.2.1) of the switch in the web browser. A login window will be

shown as below:

•Enter the factory default login ID: admin. Enter the factory default password: admin. Then click on the

“OK” button to log on to the switch.

Rack-mount Kits

•Install the rack-mount kits with eight screws.

•Use four screws to install the unit in a 19” cabinet. We suggest using two screws per ear to install in

a 19” cabinet.

•The heads of the screws should be less than 5 mm in diameter, and the shafts should be less than

2.93 mm in diameter, as show in the figure above.

1 V2

8/16-port 10/100Base Fast Ethernet Web-Smart PoE Ethernet Switch

This quick start guide describes how to install and use the 16-port 10/100Base Fast Ethernet Web-Smart

PoE Ethernet Switch. This is designed to provide power to PoE driven devices.

Physical Description

The Port Status LEDs and Power Inputs

LED State Indication

10/100Base-TX

Steady A valid network connection established.

Link/ACT Flashing Transmitting or receiving data.

ACT stands forACTIVITY.

Steady Power Device (PD) is connected.

PoE Off Power Device (PD) is disconnected.

Functional Description

•Supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE).

•Full PoE Power supplies up to 15.4W per port.

•4096 MAC addresses. 1.5M bits buffer memory.

•PoE (Power status, Link status) through the Web browser interface.

•Administrator, Port Management, VLAN Setting, Per Port Counter, Trunk Setting, QoS Setting,

Security Filter, Configuration Backup/Recovery, and Miscellaneous through the Web browser

Interface.

•10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX.

•Full wire-speed forwarding rate.

•100~240VAC, 50~60Hz Internal Universal PSU.

•0 to℃45 (℃32℉to 113℉) operating temperature range.

•Metal case. Supports Rack Mounting installation.

•The ITE is to be connected only to PoE networks without routing to the outside plant.

Web Configuration

•Login the switch:

Specify the default IP address (192.168.2.1) of the switch in the web browser. A login window will be

shown as below:

•Enter the factory default login ID: admin. Enter the factory default password: admin. Then click on the

“OK” button to log on to the switch.

Rack-mount Kits

•Install the rack-mount kits with eight screws.

•Use four screws to install the unit in a 19” cabinet. We suggest using two screws per ear to install in

a 19” cabinet.

•The heads of the screws should be less than 5 mm in diameter, and the shafts should be less than

2.93 mm in diameter, as show in the figure above.

2 V2

Autres manuels pour EX17008

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EtherWAN Routeur réseau

EtherWAN

EtherWAN EX42200 Manuel utilisateur

EtherWAN

EtherWAN InfraGreEn IG5 Manuel utilisateur

EtherWAN

EtherWAN EX42300 series Manuel utilisateur

EtherWAN

EtherWAN EX41922-T Manuel utilisateur

EtherWAN

EtherWAN EX49000 Manuel utilisateur

EtherWAN

EtherWAN EX35000 series Manuel utilisateur

EtherWAN

EtherWAN EX94000 Manuel utilisateur

EtherWAN

EtherWAN EX49122A-05T Manuel utilisateur

EtherWAN

EtherWAN EX38000A Manuel utilisateur

EtherWAN

EtherWAN EX26262 Manuel de programmation

EtherWAN

EtherWAN 72128A Manuel utilisateur

EtherWAN

EtherWAN EX17008 Manuel utilisateur

EtherWAN

EtherWAN EX47026-10B Manuel utilisateur

EtherWAN

EtherWAN EX42011 Manuel utilisateur

EtherWAN

EtherWAN C4G-S-1P3M Instructions d'installation

EtherWAN

EtherWAN EX16916 Manuel utilisateur

EtherWAN

EtherWAN EX34000 Manuel utilisateur

EtherWAN

EtherWAN EX46000 Manuel utilisateur

EtherWAN

EtherWAN 5-Port and 8-Port Pocket Size Fast Ethernet... Manuel utilisateur

EtherWAN

EtherWAN C4G-M-4P6M Instructions d'installation

EtherWAN

EtherWAN EX42017-XY Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité