Etac Turner PRO Instructions d'utilisation

Turner PRO

Wheels / Wheel axles

Rotating mechanism

If turner rotates porly:

• Unscrew bolt (5).

• Clean Low friction disc (2) and ﬂoor plate (1).

• If deep groves or damages in (1) or (2), replace

(1,2,3,4,5).

• Apply loctite 243 or simular on bolt (5), tighten bolt

ﬁrmly (approx 20Nm).

If antislip knobs are missing or worn down:

• Flip out old knobs (3).

• Clean holes and push in new knobs.

Washing

• Lay the Turner PRO on the ﬂoor in an angeled position

after washing, so the water runs out of the rotating

mechanism.

• You may also use copressed air to blow dry inside

rotating mechanism.

• Controls wheel and shaft for wear.

• Check if the wheels turn easily, remove hair and dirt.

If wheels are worn out, or still rotates porly after

cleaning:

• Use a solvent-free detergent with a pH level bet-

ween 5 and 9.

• Can be washed at 70° C for 10 minutes.

• Flip out starlock with

an screwdriver or

simular (1).

• Remove bolt and

wheel.

• Replace 1,2,3.

• Place wheel between

forks.

• Insert bolt and knock

.starlock in place.

Reconditioning

Turner PRO

Leg Support

Main plate/outer pole

• Check bracket on leg support for cracks and

wear. If cracs, replace coplete leg support.

• Check cushion for wear, should be tight and ﬁrm

around the pipe. If loose or damaged, replace

cushion.

Original spare parts from Etac should always be used.

Handle/inner pole

• Check for cracs and dents, if cracs or dents

replace inner pole.

If complete leg support needs to be replaced:

• Unscrew bolts and remove outer pole.

• Pull leg support out of pole.

If cushion need to be replaced:

• Flip out knob (3) and remove cushion.

• Clean pipe, insert new cushion and knock knob in

place.

• Insert leg support with kneepads pointing upwards

• Make sure both knobs are on the same side (1).

• Tighten knob by turning knob clockwise (2).

• Place the base plate on an even surface. Insert

pole with knee pads facing away from

the wheels.(1)

• Insert all three screws into holes in the base

plate. Use allen key to screw in bolts. Apply

loctite 243 or simular on bolts, tighten

bolt ﬁrmly, (approx 20Nm). (2)

• Check for cracks and wear on main plate and

outer pole. If cracks, replace complete Turner-

PRO.

• Check bolted conection between pole and

main plate (3 bolts), if loose bolts tighten all

bolts.

Reconditioning

Autres manuels pour Turner PRO

Autres manuels Etac Aide à la mobilité

Etac

Etac immedia PediTurn Manuel utilisateur

Etac

Etac immedia SatinSheet 2Direction Manuel utilisateur

Etac

Etac Raiser Pro Manuel utilisateur

Etac

Etac Molift RgoSling Toilet HighBack Manuel utilisateur

Etac

Etac immedia IM130DR Manuel utilisateur

Etac

Etac Avant LW Manuel utilisateur

Etac

Etac Avant Manuel utilisateur

Etac

Etac Molift Air Series Manuel utilisateur

Etac

Etac R82 Caribou Manuel utilisateur

Etac

Etac immedia SatinSheet 2Direction Manuel utilisateur

Etac

Etac Molift 452100 Manuel utilisateur

Etac

Etac immedia Swan Manuel utilisateur

Etac

Etac immedia MiniBoard Manuel utilisateur

Etac

Etac R82 High-low:xo Manuel utilisateur

Etac

Etac Molift EvoSling Ampu MediumBack Manuel utilisateur

Etac

Etac Immedia AutoTurn Manuel utilisateur

Etac

Etac Nova 100 Manuel utilisateur

Etac

Etac Molift MRS Quattro Manuel utilisateur

Etac

Etac molift Raiser Pro Block Manuel utilisateur

Etac

Etac immedia MultiGlide Single Patient Use Manuel utilisateur

Etac

Etac immedia E-Board Oval Manuel utilisateur

Etac

Etac Molift EvoSling Shadow Manuel utilisateur

Etac

Etac molift 2140002 Manuel utilisateur

Etac

Etac Molift Partner 255 Manuel utilisateur

Manuels Aide à la mobilité populaires d'autres marques

Alber

Alber Scalamobil iQ Manuel utilisateur

Ferno

Ferno CCT-PX Manuel utilisateur

HEPRO

HEPRO Gripo Manuel utilisateur

Otto Bock

Otto Bock Pheon 3R62 Manuel utilisateur

NRS Healthcare

NRS Healthcare M11090 Manuel utilisateur

Medline

Medline MDS86835DSHEC Guide d'installation

Guldmann

Guldmann Twin Turner II Manuel utilisateur

Drive

Drive ROOMBA Manuel utilisateur

Gate

Gate Balder Manuel utilisateur

Decon wheel

Decon wheel TNS Notos Manuel utilisateur

ExoAtlet

ExoAtlet ExoAtlet-II Manuel utilisateur

Invacare

Invacare Storm Series Mode d’emploi

Rhythm Healthcare

Rhythm Healthcare B3800F Manuel utilisateur

AMF-BRUNS

AMF-BRUNS PROTEKTOR Manuel utilisateur

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Manuel utilisateur

Rhythm Healthcare

Rhythm Healthcare C500U Manuel utilisateur

Lumex

Lumex RJ4200A Manuel utilisateur

Rebotec

Rebotec Jumbo Manuel utilisateur