Essilor Neksia Manuel utilisateur
User Manual
CONTENTS
INTRODUCTION 5
I. FIRST STEPS
1. Descriptive diagrams 8
2. Using the edger 10
a. Turning on the edger 10
b. Switching off off the edger 10
c. Using the touch screen and keypads 11
d. Edging screen 12
II. EDGING A LENS 15
1. Edger working environment 16
a. Menu screen 16
b. Calling a shape 18
c. Lens set-up and feeling 19
2. Beveling 20
a. Automatic beveling 21
b. Legend screen for customized bevels 22
c. Customized beveling 23
d. Modifying the bevel curve 25
e. Modifying the bevel curve at a particular point 26
f. Displacing the bevel curve 2
3. Grooving 2
a. Automatic grooving 28
b. Customized groove menu screen 29
c. Customized grooving 31
d. Modifying the groove curve 32
e. Modifying a point in the groove curve 33
f. Displacement of the groove curve 34
4. Flat-edge finishing 35
5. Drilled job 36
a. Automatic drilling 36
b. Customized drilling menu screen 3
c. Customized drilling 38
6. Polishing 40
. Chamfering 40
8. Retouching 42
III. CONFIGURING THE EDGER 45
1. Configure the edger 46
a. Time, date and language 46
b. Connections 4
c. Screensaver and screen brightness 4
2. Adjusting the precision of the edger 48
a. Adjusting the diameter of the finished lenses 48
b. Adjusting the position of the bevel and groove 49
c. Adjusting the diameter of drill-holes 50
USER MANUAL> CONTENTS
d. Adjusting the chamfer 51
e. Adjusting the groove 52
3. Restoring the factory settings 52
IV. MAINTENANCE & SERVICING 53
1. Carrying out the autotests 54
2. Checks and calibration 55
a. Calibrating the feelers 55
b. Calibrate the touch screen 5
3. Statistics and technical history 5
a. Edger cycles 5
b. Technical history and errors 58
4. Changing or cleaning the edger tools 60
a. Changing or cleaning the drill bit 60
b. Changing the grooving or chamfering wheel 62
5. Maintaining and cleaning the edger 64
a. Precautions required 64
b. Cleaning the window and GCD module 65
c. Dressing the wheels 68
TECHNICAL DATA 1
1. Edger 2
2. Environment 3
GENERAL INFORMATION 5
1. Symbols 6
2. Modifications 6
3. Declaration of conformity 6
4. Copyright
5. Materials and products
6. Safety instructions:
. Electromagnetic waves 8
GLOSSARY 9
USER MANUAL> CONTENTS
INTRODUCTION
To help you get the most out of the functions available on your edger, please refer to the documentation in:
•the Introduction Guide provided on installation
•the user manual, on the CD-ROM
The screens and features vary according to the edger used:
•Neksia Classic
•Neksia
•Neksia drill
This manual documents the use of the Neksia Drill edger.
USER MANUAL> INTRODUCTION
5
Neksia > v1.0 - 02.14
I. FIRST STEPS
This chapter contains all the information you will need to start using the edger:
•Description of the edger (F p.8)
•Using the device (F p.10)
1. DESCRIPTIVE DIAGRAMS
This section consists of the list and descriptions of accessories for the edger.
1. Trough
2. Main switch
3. Connectors
4. Screen
5. fan
6. Manufacturer plate
Neksia > v1.0 - 02.14
8
USER MANUAL> I. FIRST STEPS
Connectors
1. Serial port
2. Ethernet port
3. SB port
4. Barcode reader port
5. Power socket
6. Solenoid valve socket
7. Pump socket (tank + pump) / Solenoid valve socket (town)
Accessories
Transport wedges to be kept
Use accessories
•22 mm posiblock holder
•18x14 mm posiblock holder
•22 mm stop
•18x14 mm stop
•Unblocking clamp
•Ø 1.0 mm drill bit (mounted on the module) (option)
•Ø 0.8 mm drill bit (option)
•Ø 25 mm grooving wheel (mounted on the module)
•Chamfering wheel (mounted on the module)
Servicing accessories
•Orange dressing stone for glass roughing wheel
•White dressing stone for finishing wheel
•Square dressing stone for polishing wheel
•Drill bit changeover tool
•Open-ended spanners for tool changeover (quantity 2)
USER MANUAL> I. FIRST STEPS
9
Neksia > v1.0 - 02.14
Options
•Trimaterial edger for chamfering glass lenses
•Barcode reader
•Roll of barcode labels
•Open or closed circuit spraying kit
Connection accessories
•Power cable
•RJ45 cable for the tracer-edger connection
•Wastewater evacuation pipe with attachment ring
2. USING THE EDGER
In this section, you will find all the information concerning the following:
•Turning the edger on (F p.10) and off (F p.10)
•The use of the touch screen and the keyboards (F p.11),
•The description of the work screens of the edger (F p.12).
a. Turning on the e ger
To switch on the edger, press the main switch located on the top of the machine.
The edger will initialise.
On the edger screen, press the icon to complete the initialization phase.
A beep indicates that the initialisation was successful.
The edger is ready for use when the initial screen is displayed.
b. Switching off off the e ger
Before switching off the edger:
•check that there is no lens in the trough
•check that the lens clamp shafts are loosened and that the trough door is open
•select the edging screen
Select then .
A confirmation message is displayed on each screen.
Select to confirm.
The edger will switch off.
Neksia > v1.0 - 02.14
10
USER MANUAL> I. FIRST STEPS
>
>
>
>
1
2
1
2
3
Autres manuels pour Neksia
1
Table des matières
Autres manuels Essilor Bordureuse
