1. Configure the edger 67
a. Time, date and language 67
b. Connections 68
c. Screensaver 68
2. Adjusting the precision of the edger 68
a. Adjusting the diameter of the finished lenses 69
b. Adjusting the position of the bevel and groove 70
c. Adjusting the diameter of drill-holes 70
d. Adjusting the chamfer 71
e. Adjusting the groove 72
f. To adjust the engraving 72
g. Adjust the position of high-base bevel 73
h. Adjust the position of the step bevel 74
3. Restore the factory settings 75
IV. MAINTENANCE & SERVICING 77
1. Carrying out the autotests 79
2. Calibrating the touch screen 80
3. Consult the preventive maintenance screen of the “small tools” module 80
4. Changing or cleaning the edger tools 82
a. Changing or cleaning the mill bit 83
b. Changing or cleaning the drill bit 84
c. Changing the engraving tip 86
5. Statistics and technical log 88
a. Edger cycles 88
b. Technical history and errors 90
6. Maintaining and cleaning the edger 90
a. Precautions required 90
b. Clean the door, the GMD module and the wheels (high-base and step bevel) 91
c. Dressing the wheels 91
V. USING TO M’EYE SIGN 93
1. To activate to M’EYE Sign 95
2. To carry out an engraving 97
a. To prepare the engraving 97
b. Performing engraving 107
c. Setting up the favorites 111
3. To produce a creative shape 112
a. On Essibox 112
b. On the edger 119
TECHNICAL DATA 121
1. Edger 122
2. Environment 123
GENERAL INFORMATION 125
1. Symbols 126
2. Modifications 126
3. Declaration of conformity 126
4. Copyright 126
5. Materials and products 126
6. Safety instructions: 127
7. Electromagnetic waves 127
8. License agreement for M’EYE Sign™ (Engraving) software 127
