Esco 10493 Manuel utilisateur
Equipment Supply Company
Instruction Manual
HD 10 Ton High-Lift Jack Stand
ESCO #10493
Copyright © 2017 Equipment Supply Co., All rights reserved
REV.06.17.A
21.800.352.9852 • [email protected] • www.esco.net
ESCO HD 10 Ton High-Lift Jack Stand Model #10493
CAUTION:
THIS PRODUCT, AS WELLAS ALL TIRE TOOLS, SHOULD NEVER
BE USED BY PERSONS UNLESS THEY HAVE BEEN TRAINED
PROPERLYACCORDING TO OSHAREGULATIONS 29CFR
1910.177 ENTITLED “SERVICING SINGLE-PIECE &
MULTIPIECE RIM WHEELS”.
FOR THE SAFE USE OF THIS PRODUCT, PLEASE READ
INSTRUCTIONS. FAILURE TO DO SO CAN LEAD TO A VOID IN
WARRANTY OR SERIOUS INJURY. PLEASE USE THIS TOOLAND
OTHER TIRE SERVICE TOOLS WITH THE UPMOST SAFETY
PRECAUTIONS.
Product Description
The ESCO HD 10 Ton High-Lift Jack Stand [Model #10493] is designed to
provide extra heavy-duty support on raised vehicles. The High-Lift Jack
Stand has a spring assisted shaft and up to 11 total adjustable pin positions
for precise height. Also included is a adjustable lifting pad to support the
load. With three spring loaded caster wheels, movability is simple and easy.
The folding tripod design makes for easy storage.
Before using the product, carefully read the instructions manual and all
stickers and warnings noted on the product. This is necessary to avoid
injury to the operator and damage to the product.
3
ESCO HD 10 Ton High-Lift Jack Stand Model #10493
Product Specications
Lifting Capacity: 10 Tons | 20,000 lbs.
Min. Height: 43” | 1096 mm
Max. Height: 69.25” | 1759 mm
Overall Width: 38.4” | 975 mm
Weight: 200 lbs. | 90 kg
OTHER RELATED PRODUCTS BY ESCO
#10455 #10802 #10803 #10804
#10805 #10390 #10446 #10447
41.800.352.9852 • [email protected] • www.esco.net
ESCO HD 10 Ton High-Lift Jack Stand Model #10493
BEFORE USE:
• Before use of this tool please verify that the application of this tool is
compatible. For more information about this tool or any other tools
• Assemble product according to parts breakdown and assembly
provided.
• Read the entire operation manual including warnings before any use
of this tool.
• Always inspect the jack stand before use to ensure it is working
properly. If there is any damage, DO NOT put into service. Contact the
manufacturer or an authorized distributor of ESCO product and parts
for replacement parts or consulation.
OPERATION:
• Refer to your vehicles owner’s manual for proper jacking procedures.
Lift only on areas of the vehicle specied by the vehicle manufacturer.
• Position jack stand under vehicle at points specied by the vehicle
manufacter load support points.
• To adjust jack stand:
1. Raise or lower jack stand post to desired height.
2. Insert locking Pin and making sure it’s all the way through.
3. Adjust the screw saddle to desired height.
• Carefully lower load onto stand.
DO NOT OVERLOAD JACK STAND RATED CAPACITY
5
ESCO HD 10 Ton High-Lift Jack Stand Model #10493
MAINTENANCE & INSPECTION:
• Visual inspection shall be made before each use of the stands, check-
ing for cracks, cracked welds and missing and/or damaged parts.Any
stand that appears to be damaged in any way should be removed from
service immediately.
• Because of the potential hazards associated with the misuse of
equipment of this type, no modications should be made of the product
without consent from manufacturer.
NOTES
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
________________________________________________
7
ESCO HD 10 Ton High-Lift Jack Stand Model #10493
GUARANTEED 1 Day Turnaround Service.
Received by ESCO - Repaired in 24 Hours - Returned to You!
XESCO will pick up product for repair/warranty at your location.
XESCO will guarantee Repair/Service for 30 days.
XESCO has rental tools available
XESCO repairs IMT, FEC, Stellar, Blackhawk, OTC, Power Team, Ame Int., & Enerpac hydraulic
pumps, bead breaker, and cylinders.
XAuthorized ESCO Repair & Warranty Centers Located through the US & Canada. For more informa-
tion contact your ESCO sales representative.
XTechnical Support Over the Phone Available by Calling 1-800-352-9852
Prompt, reliable service after the sale is very important to ESCO. ESCO maintains an
in-house repair facility in Brooksville, Florida. To insure that our customers have as little
down-time as possible, we offer a 1 day turnaround service. Our factory repair service is equipped with all the
tools and machinery needed to repair your equipment quickly and affordably. Our trained technicians are the
best in the industry. Not only do we service our own products, but we also service our competitors’ products.
In addition to ESCO’s 30 years of providing quality repair service, ESCO has reached out and partnered with
more than 50+ hydraulic repair facilities across the US & Canada, to deliver quality repair and timely return of
products. Visit www.esco.net or call 1.800.352.9852 to hear more about the newly added “Authorized ESCO
Warranty & Repair Facilities” across the US.
If you have a bead breaker, ram, or hydraulic pump that needs repair, ESCO xes your
product with factory parts and guarantees the repair. In addition to servicing ESCO brand products, we also re-
pair CP, IMT, Elrick, Branick, Goodyear, FEC, Ame Int., and Haltec lines of hydraulic bead breakers, rams, pumps,
jacks, and many other hydraulic tire service equipment.
“Providing Quality Hydraulic Repair and Technical
Support for All Your Hydraulic Product Needs”
CONTACT INFO:
15270 Flight Path Drive
Brooksville, FL 34604
PH. 352.754.1117
Toll Free. 1.800.352.9852 (US, Canada Only)
Fax: 352.754.4508
ESCO - The Proper Tools to Keep Your Equipment Moving!
Stay Connected with ESCO...
The Proper Tools To
Keep Your Equipment
Scan this Code to Go to
the ESCO website
WWW.ESCO.NET
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Esco Jack
Esco
Esco YELLOW JACKIT 10812 Manuel technique
Esco
Esco Yellow Jackit 10450 Manuel utilisateur
Esco
Esco YAK 22/11 Manuel utilisateur
Esco
Esco 90520 Manuel utilisateur
Esco
Esco Pro Series Manuel utilisateur
Esco
Esco 10897 Manuel utilisateur
Esco
Esco 10435 Manuel de la liste des pièces
Esco
Esco Pro Series Manuel utilisateur
Esco
Esco YAK 66/33/17 Ton Jack Manuel utilisateur
Esco
Esco CYCLONE X Series Manuel utilisateur
Esco
Esco 10807 Manuel utilisateur
Esco
Esco YELLOW JACKIT 10399 Manuel utilisateur
Esco
Esco YAK 221/N Manuel utilisateur
Esco
Esco 40802 Manuel utilisateur
Esco
Esco 530AD Manuel utilisateur
Esco
Esco 10405 Manuel utilisateur
Esco
Esco 70131 Manuel de la liste des pièces
Esco
Esco 10771 Manuel utilisateur
Esco
Esco 10497 Manuel utilisateur
Manuels Jack populaires d'autres marques
VEVOR
VEVOR TJD-12000SP-F Manuel utilisateur
ULTIMATE SPEED
ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK Manuel utilisateur
Stels
Stels 51131 Manuel utilisateur
Bushranger
Bushranger RJX01 Manuel utilisateur
Clarke
Clarke CTJ2500QLG Manuel d'installation et d'exploitation
Valex
Valex 1650520 Manuel utilisateur
