3
It is recommended to carefully read the instructions for use described in this manual
before switching JetGun on.
Keep this manual near the device for any quick consultation by the operators.
If used correctly, according to the instructions provided by ERRECOM SPA, the device
does not present any danger to the operator.
ERRECOM SPA declines all responsibility for malfunctions and / or other consequences
resulting from incorrect operation by the user.
WARNING
• Check JetGun before each use. If damaged do not use it and have it repaired by qualied personnel only.
• It is forbidden to open JetGun by unauthorized personnel.
• Maintenance or repair of JetGun must only be carried out by authorized personnel.
• Do not open JetGun while it is connected to the power supply.
• Read carefully this user manual before powering up JetGun.
• Only qualied and trained personnel can work with JetGun.
SAFETY PRECAUTIONS
USER INSTRUCIONS
CE DECLARATION OF CONFORMITY
JetGun is a jet cleaning machine to clean Evaporators and Condensers of Air Conditioning and Refrigeration Systems.
JetGun works with water, acid cleaners, alkaline cleaners and disinfectant.
Thanks to SaniGun, a washing gun with long pipe and fan pattern jet (Art.-Nr. RP1068.01 sold separately), JetGun can
be used for environment sanication through disinfectant or purifying products.
JetGun leverages the best technologies currently available. This handbook must be considered an integral part of the
device you just bought as it contains important instructions for its safe and correct use.
Therefore we recommend you to carefully read all the directions before switching JetGun on. For future reference and
to adequately train new operators, please keep this handbook with the device.
ERRECOM SPA located at Via Industriale, 14 in Corzano (Brescia) ITALY
DECLARES
that JetGun, the jet cleaning machine, complies with the following regulations:
• EN 55014-1:2017
• EN 61000-3-2:2014
• EN 61000-3-3:2013
• EN 55014-2: 2015
• (IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-11)
DISPOSAL (WEEE DIRECTIVE)
The symbol on the side indicates that separate collection of waste electrical and electronic
equipment is mandatory for scrapping. At the end of the device’s working life, the parts,
separated by the type of material, have to be disposed in conformity with the local and
national laws in force to prevent potential effects on the environment and human health.
EN
