Ericsson LBI-38795B Manuel utilisateur

Operator’s Manual

AEGIS EDACS®M-PA

SYSTEM MODEL

PORTABLE RADIO

LBI-38795B

Table of Contents

INTRODUCTION . . . . . . . . . . . . 5

CONTROLS . . . . . . . . . . . . . . 5

INDICATORS . . . . . . . . . . . . . . 10

OPERATION . . . . . . . . . . . . . . 13

POWER-UP . . . . . . . . . . . . . 13

SYSTEM/GROUP/CHANNEL

SELECTION . . . . . . . . . . . . . 14

VOICE MODES . . . . . . . . . . . 15

Clear Modes . . . . . . . . . . . 15

Table of Contents (Cont.)

Aegis Digital Mode . . . . . . . 16

Aegis Private And Voice Guard

Private Modes . . . . . . . . . . 16

TRUNKED MODE OPERATION . . . 20

Receiving A Message . . . . . . 20

Sending A Message . . . . . . 21

Emergency Operation (Trunked

Mode) . . . . . . . . . . . . . . 23

Dynamic Regrouping . . . . . . 23

Wide Area SystemScanning . . 24

ScanningTrunkedGroups . . . . 24

Special Calls . . . . . . . . . . 26

Manually DialedTelephone Inter-

connect Calls . . . . . . . . . . . . 29

STATUS MESSAGE OPERATION . . 30

CONVENTIONAL MODE

OPERATION . . . . . . . . . . . . 30

Receiving A Message . . . . . . 30

Sending A Message . . . . . . 31

Emergency Operation (Conven-

tional Mode) . . . . . . . . . . . 33

Scanning Conventional

Channels . . . . . . . . . . . . 33

This manual is published by

Ericsson Inc.

without any warranty. Improvements and changes

to this manual necessitated by typographical er-

rors, inaccuracies of current information, or im-

provementstoprogramsand/orequipment,maybe

made by

Ericsson Inc.

, at any time and without

notice.Suchchangeswillbeincorportatedintonew

editions of this manual.No part of this manual may

be reproduced or transmitted in any form or by any

means, electronic or mechanical, including photo-

copyingandrecording,foranypurpose,withoutthe

express written permission of

Ericsson Inc.

Table of Contents (Cont.)

OPERATINGTIPS . . . . . . . . . . . 34

OPERATING RULES AND REGULA-

TIONS . . . . . . . . . . . . . . . . . 35

BATTERY PACKS . . . . . . . . . . . 36

INSTALLING THEBATTERY PACK . 36

REMOVING THE BATTERY PACK . . 36

CHARGING THE BATTERY PACK . S38

RECHARGEABLE BATTERY PACK

DISPOSAL . . . . . . . . . . . . . . 38

SWIVEL MOUNT REMOVAL AND

REPLACEMENT . . . . . . . . . . . . 38

GLOSSARY . . . . . . . . . . . . . . 39

WARRANTY . . . . . . . . . . . . . . 44

NICKEL-CADMIUM BATTERY

WARRANTY . . . . . . . . . . . . . . 45

PRODUCT SPECIFICATION FOR CE

MARKED EQUIPMENT

The M-PA Portable conforms to the following

Product Specifications.

EUROPEAN STANDARDS:

Safety: Not applicable

EMC: prETS 300 279 (August 1995)

TTD: Not applicable

SUPPLEMENTARY INFORMATION

At this time, the M-PA portable radio may not

be operated while in a vehicular charger in the

EuropeanCommunitysinceithasnotbeenevalu-

ated for operation in this mode.

TheM-PAportable radiomay beusedinboth

trunked and conventional applications.

Figure 1 -Aegis EDACSM-PA SystemModel Radio

SIDE VIEW FRONT VIEW

INTRODUCTION

TheAegis



EDACSM-PA



Systemmodel

portable radio is a high-performance two-way ra-

dio that provides clear voice, Aegis digital, and

Aegis private communications.The radio is also

compatible with Voice Guard®communication

systems. Personality programming allows maxi-

mum integration flexibility into EDACS and con-

ventional radio systems.

The radio must be equipped with the en-

crypt/decrypt option before operation in Aegis

private or Voice Guard modes is possible. This

option allows the radio to communicate using

highly secure state-of-the-art Aegis and Voice

Guard encryption and decryption techniques.

Operating controls on the radio include a

rotatable system/group/channel control knob, ro-

tatable volume control, 16-button keypad, push-

to-talk, emergency and monitor buttons. The

on/off power switch for the unit is located on the

removable battery pack.

The8-digitalphanumericliquidcrystaldisplay

(LCD) on the front of the radio displays the oper-

ating status of the radio. This backlit display also

has sixteen status flags that indicate various op-

erating conditions such as private communica-

tions enabled, transmitter on, scanning, or

emergency mode enabled.

The exact operation of your radio will vary

depending upon the mode of operation, the ra-

dio’s programming, and the particular radio sys-

tem. Consult your radio system’s representative

for particular features that are programmed into

your radio.

CONTROLS

ON/OFF SWITCH

The ON/OFF SWITCH is located on the bat-

terypack. Slidingthisswitchupwillsupplypower

totheradiofromthebatterypack. Anaudibleclick

will be heard and the "ON" indicator will be ex-

posed. Whentheradioisturnedon,itwillperform

a power-up self test and then resume operation

ontheprevious operatingsystem,grouporchan-

nel as displayed in the LCD. Sliding the switch

down will turn the radio off.

VOLUME CONTROL KNOB

TheVOLUMECONTROLKNOBisarotatable

control on the top of the radio used to adjust the

receiver’saudiolevelinthespeaker. Rotatingthis

knob in a clockwise direction will increase the

audio level. Counter-clockwise rotation will de-

crease the audio level. Minimum levels may be

programmedintotheradiotopreventmissedcalls

due to too low of a volume setting.

CONTROL KNOB

The rotatable 16-position CONTROL KNOB

located on the top of the radio may be pro-

grammed to select trunked groups and conven-

tionalchannelsoritmaybeprogrammedtoselect

systems. SeeSYSTEM/GROUP/CHANNEL SE-

LECTION for details.

A stop plate may be installed under the knob

to limit the maximum number of positions to less

than sixteen (16). It is normally factory installed

for fifteen (15) positions.

PTT BUTTON

PressingthePTTBUTTONonthesideofthe

radio will enable the radio’s transmitter. The "TX"

statusflaginthedisplaywillturnonwhentheradio

is transmitting. Releasing the PTT BUTTON will

return operation to receive mode.

Whenoperatinginatrunkedsystem,theradio

may be programmed to automatically transmit

(withoutthe operatorpressing thePTTBUTTON)

tomaintaincommunicationwiththesitecontroller.

The "TX" statusflag will turn on whenthe radio is

transmitting.

MONITOR BUTTON

Trunked Mode

When operating in trunked mode, pressing

the MONITOR BUTTON after an individual call

has been received will return the radio to the

groupcallmode. Theradiowillnotrespondonan

individual basis, but will then transmit groupcalls

whenthePTTBUTTONispressed. Theradiowill

also automatically return to the group call mode

after the programmed call-back time-out period

expires.

Pressing the MONITOR BUTTON will also

clear any digits entered from the numeric keypad

andreturntheradiototheselectedgroupdisplay.

In addition, this button is used to toggle be-

tween group and regroup settings if the Dynamic

Regrouping mode (with deselect capability) has

been enabled by the site controller.

Conventional Mode

When the radio is operating in conventional

mode the MONITOR BUTTON is used to un-

squelch the receiver. If programmed for the se-

lected channel, it will also toggle Channel Guard

(CG) and/or Type 99 (T99) signaling on and off.

Momentarily pressing the MONITOR BUT-

TON will unsquelch the receiver. If programmed,

pressing and holding the button for at least one

(1)secondwilltoggleCGand/orT99signalingon

oroff. AfteraT99callhasbeenreceived,pressing

theMONITORBUTTONwillresettheradioforthe

next call. Note: Selecting another channel will

turnCGandT99signalingbackonifprogrammed

for the channel.

EMERGENCY BUTTON

When operating in trunked mode, pressing

and holding the red EMERGENCY BUTTON on

top of the radio for approximately one (1)second

willinitiateanemergencycallwithvoiceoperation

on the programmed home group. If no home

group is programmed into the radio, voice opera-

tion will be on the selected group.

In conventional mode, initiating an emer-

gency call by pressing the EMERGENCY BUT-

TON will cause the radio to transmit GE-STAR

signaling on the programmed emergency chan-

nel. If no emergency channel is programmed,

GE-STAR will be transmitted on the selected

channel.

STEP BUTTON

The STEP button located on the keypad may

be programmed to select trunked groups and

conventional channels or it may be programmed

toselectsystems.SeeSYSTEM/GROUP/CHAN-

NEL SELECTION for details.

STEP is also used to scroll through the pro-

grammed special call table when the special call

mode is enabled.

SCAN BUTTON

Pressing the SCANbutton on the keypad will

togglescanoperationonandoff. Whentheradio

is scanning, the "SCN" status flag in the display

willshowandallgroups/channelsonthe scanlist

in the current system will be scanned.

SPECIAL CALL BUTTON

When operating in trunked mode, pressing

SPC will switch operation from the group select

mode to the specialcall mode. The last selected

special call will be displayed.

While in special call mode, the next pro-

grammed special call may be selected by press-

ingSTEP. Pressing2ndthenSTEPwillselectthe

previousprogrammedspecialcall. Thecaller’sID

of the last received individual call and the last

receivedgroupcallontheselectedgrouparealso

selectable using this method. See Special Calls

for details.

2nd FUNCTION BUTTON

Seven (7) of the buttons on the keypad are

dual-functionbuttons. Pressandreleasetheblue

2ndfunctionbuttontoshiftkeypadselectiontothe

A/D, PVT, STO, RCL, CLR, KEY or STS buttons.

The following paragraphs describe operation of

the shifted buttons.

Figure 2 - Keypad

ADD/DELETE BUTTON (Shifted SCAN

Button)

When in trunked mode, pressing and releas-

ing 2nd and then pressing A/D (shifted SCAN

button)willaddtheselectedgrouptothescanlist

if it is not already on the list. Repeating this

sequencewilldeletethegroupfromthelist. When

the selected group is on the scan list, the "S"

status flag will show in the display.

Inconventionalmode,pressingandreleasing

2ndandthen pressingA/Dwillscrolltheselected

channel’s scan priority between non-priority scan

("S"statusflag),priority-twoscan("2"statusflag),

priority-onescan("1"statusflag)andnoscan(no

status flags).

Scan must be turned off before groups or

channels can be added to or deleted from the

scan list. See SCAN BUTTON for details.

PRIVATE BUTTON (Shifted SPC Button)

Private transmit mode is enabled or disabled

by pressing and releasing 2nd and then pressing

PVT (shifted SPC button). When enabled, the

"PVT" status flag in the display will turn on.

If the radio is programmed for forced private

operation, "FRCD PVT" will be displayed when

2nd-PVT ispressed;private transmit mode is not

disabled. If the selected group or channel is not

programmed forprivate operation, "PVT DIS" will

momentarily show in the display when 2nd-PVT

is pressed; the radio will not change to private

mode. See PRIVATE COMMUNICATIONS for

additional details.

STORE BUTTON (Shifted Digit 1)

STO(shifteddigit1)allowsten(10)telephone

numbers and ten (10) radio ID numbers to be

stored and later recalled with the RCL button.

Store a telephone number by entering the

number (up to 29 digits) followed by an asterisk

(*). Next, enter the storage location (1-10) and

press and release 2nd and then press STO.

"STORED" will be displayed for two seconds.

StoreindividualradioIDnumbersbyentering

the ID number (1 - 16382) followed by a pound

sign(#).Nextenterthestoragelocation(1-10)and

press and release 2nd and then press STO.

"STORED" will be displayed for two seconds.

RECALL BUTTON (Shifted Digit 3)

RCL allows the previously stored telephone

or radio ID numbers to be recalled. To recall a

number first enter an * or # (* for telephone

number,# forradioIDnumber)andthenenterthe

storage location (1-10). Next press and release

2nd and then press RCL and the number will be

displayed.

CLEAR BUTTON (Shifted # Button)

To clear the last digit entered, press and re-

lease 2nd and then press CLR (shifted # button).

Holding CLR down will repetitively clear previous

digits. The radio will return to the last operating

state when all entered digits are cleared.

KEY BUTTON (Shifted Digit 6)

Pressingandreleasing2ndandthenpressing

KEY (shifted digit 6) will display the current oper-

atingcryptographicnumber.SeePRIVATE COM-

MUNICATIONS for details.

STATUS BUTTON

The STS button will be used for future status

operations.

KEYPAD LOCK FEATURE

Topreventaccidentalactivationofthebuttons

on the keypad, simultaneously press SCAN and

SPC to lock the keypad; "LOCKED" will be dis-

played momentarily. To unlock thekeypad, press

SCANandSPCasecondtime;"UNLOCKED"will

be displayed momentarily.

INDICATORS

The radio’s liquid crystal display (LCD) lo-

cated on the front panel has eight (8) alphanu-

meric characters and sixteen (16) status flags.

This display provides indications of the current

operating system, group or channel and it dis-

playsvariousothermessagessuchasspecialcall

ID names or numbers, and telephone intercon-

nect numbers.

Table des matières

Autres manuels Ericsson Radio portable

Ericsson

Ericsson Monogram Series MGP 450 Manuel utilisateur

Ericsson

Ericsson EDACS M-RK I Manuel utilisateur

Ericsson

Ericsson KPC-300 Manuel utilisateur

Ericsson

Ericsson LBI-39125A Manuel utilisateur

Ericsson

Ericsson DUAL FORMAT MDR Manuel utilisateur

Ericsson

Ericsson EDACS DPE-100 Manuel utilisateur

Ericsson

Ericsson TMX-8825 Manuel utilisateur

Ericsson

Ericsson EDACS M-RK-II Manuel utilisateur

Ericsson

Ericsson M-PA Manuel utilisateur

Ericsson

Ericsson PCS Manuel utilisateur

Ericsson

Ericsson M-PA Manuel utilisateur

Ericsson

Ericsson LZT-1872R1A Manuel utilisateur

Ericsson

Ericsson PCS Manuel utilisateur

Ericsson

Ericsson M-PA EDACS Manuel utilisateur

Ericsson

Ericsson Voice Guard M-Pa SCAN Manuel utilisateur

Ericsson

Ericsson EDACS M-RK-II Manuel utilisateur

Ericsson

Ericsson AEGIS FDMRTS M-PA NARROWBAND 9600 Manuel utilisateur

Ericsson

Ericsson AEGIS EDACS M-PA LBI-33056 Manuel utilisateur

Ericsson

Ericsson EDACS M-PA 806-870 MHz Manuel utilisateur

Ericsson

Ericsson PCS Manuel utilisateur

Ericsson

Ericsson EDACS IPE-200 Manuel utilisateur

Ericsson

Ericsson EDACS ORION Manuel utilisateur

Ericsson

Ericsson M-PA EDACS Manuel utilisateur

Ericsson

Ericsson EDACS DPE-100 Manuel utilisateur

Manuels Radio portable populaires d'autres marques

Telefunken

Telefunken P5 Manuel utilisateur

Tait

Tait TP9300 Manuel utilisateur

Lafayette

Lafayette Guardian 5500 Manuel utilisateur

Sailor

Sailor SP3300 Manuel utilisateur

Matra Nortel

Matra Nortel MC 6500 Manuel utilisateur

Hytera

Hytera PD362i Manuel utilisateur

Vertex Standard

Vertex Standard VX-P920 Series Manuel utilisateur

Roberts

Roberts Ecologic 3 Manuel utilisateur

LENCO

LENCO IPD-5100 Manuel utilisateur

Baofeng

Baofeng BF-82 Manuel utilisateur

Philips

Philips AE2110/04 Manuel utilisateur

Trevi

Trevi RA 764 Manuel utilisateur

TerraTec

TerraTec NOXONiRadio Manuel d'utilisation et d'entretien

M/A-Com

M/A-Com P5100 Series Manuel utilisateur

Elta

Elta 6699 Manuel utilisateur

PURE

PURE ONE classic Series II Manuel utilisateur

Teac

Teac PR130 Manuel utilisateur

Philips

Philips AE6370 Manuel utilisateur