Erbauer ECS1400 Manuel utilisateur
ECS1400
EAN: 3663602795773
ORIGINAL INSTRUCTIONS
1400W circular saw MNL_ECS1400_TPS_GB_V2_BX220IM-10-8-2020
2
Safety instructions 7
Product description 22
Assembly 25
Use 28
Care & maintenance 32
Guarantee 35
Declaration of conformity 36
Product description 4
Safety instructions 7
Product description 22
Assembly 25
Use 28
Care & maintenance 32
Guarantee 35
Declaration of conformity 36
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 2 6/5/18 3:24 PM
1
x1
3
WARNING! Please read all safety warnings carefully and be
sure that they are fully understood before handling the tool.
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 3 6/5/18 3:24 PM
4
Product description
1
4
56b
6a
7
8
9
10a
20a
20b
21
24
23
22
10
18 19
11
12
14
13
15
17
2
3
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 4 6/5/18 3:24 PM
5
A
11
17 16 15
14
13
24
B
7
1.
2.
C D
2.
1.
1.
2.
3.
8
20a
20b
E F
1.
2.
6b6a
1.
2.
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 5 6/5/18 3:24 PM
6
G H
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 6 6/5/18 3:24 PM
7
Safety instructions
GENERAL POWER TOOL SAFETY WARNING
WARNING! Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk
of electric shock.
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 7 6/5/18 3:24 PM
8
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energising power tools that have the switch
on invites accidents.
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 8 6/5/18 3:24 PM
9
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 9 6/5/18 3:24 PM
10
e) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) SERVICE
a) Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTIONS FOR CIRCULAR SAW
CUTTING PROCEDURES
a) DANGER: Keep hands away from cutting area
and the blade. Keep your second hand on auxiliary
handle, or motor housing. If both hands are holding
the saw, they cannot be cut by the blade.
b) Do not reach underneath the workpiece. The guard
cannot protect you from the blade below the workpiece.
c) Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade teeth
should be visible below the workpiece.
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 10 6/5/18 3:24 PM
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Erbauer Scie
Erbauer
Erbauer ERB110SSW Manuel utilisateur
Erbauer
Erbauer ECS18-Li Manuel utilisateur
Erbauer
Erbauer ERB566CSW Manuel utilisateur
Erbauer
Erbauer ERB1590LA Manuel utilisateur
Erbauer
Erbauer ERA568RSP Manuel utilisateur
Erbauer
Erbauer ERB609MSW Manuel utilisateur
Erbauer
Erbauer ERB2504SE Manuel utilisateur
Erbauer
Erbauer ERB239MSW Manuel utilisateur
Erbauer
Erbauer ERN642ATL-I Manuel utilisateur
Erbauer
Erbauer ERB566CSW Manuel utilisateur
Erbauer
Erbauer EMCS650 Manuel utilisateur
Erbauer
Erbauer ERB2501SE Manuel utilisateur
Erbauer
Erbauer EDD18-Li-2 Manuel utilisateur
Erbauer
Erbauer ERB596CSW Manuel utilisateur
Erbauer
Erbauer ERB800RL Manuel utilisateur
Erbauer
Erbauer ERB596CSW Manuel utilisateur
Erbauer
Erbauer ERF298MSW Manuel utilisateur
Erbauer
Erbauer ERB237MSW Manuel utilisateur
Erbauer
Erbauer ERB690CSW Manuel utilisateur
Erbauer
Erbauer EMIS216S Manuel utilisateur
