Erbauer EBR1750 Manuel utilisateur

EBR1750

EAN: 3663602795193

ORIGINAL INSTRUCTIONS

Safety instructions 6

Product description 16

Assembly 19

Use 21

Care & maintenance 23

Guarantee 26

Declaration of conformity 27

WARNING! Please read all safety warnings carefully and be

sure that they are fully understood before handling the tool.

Product description

8 7

4. 1.

B1.

180°

9/10

E1.

180°

H11

Safety instructions

GENERAL POWER TOOL SAFETY WARNING

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, re and/or

serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodied plugs and matching outlets will reduce risk

of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energising power tools that have the switch

on invites accidents.

d) Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a hazardous

situation.

5) SERVICE

a) Have your power tool serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

ADDITIONAL SAFETY WARNINGS FOR BREAKER

HAMMER SAFETY WARNINGS

a) Wear ear protectors. Exposure to noise can cause

hearing loss.

b) Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

c) Hold power tool by insulated gripping surfaces

only, when performing an operation where the

cutting accessory may contact hidden wiring or its

own cord. Cutting accessory contacting a “live” wire

may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

d) ALWAYS ensure that the auxiliary handle is rmly

afxed and secure.

e) ALWAYS use this product when standing on a rm

and secure platform or the ground. (DO NOT USE ON

LADDERS OR STEPS)

f) The power tool shall not be wet or applied in wet

environment.

g) The voltage of the power source must agree with the

voltage specied on the rating label of the machine.

h) Check the product, its power cord and plug as well as

accessories for damage before each use. Do not use

the product if it is damaged or shows wear.

i) Double check that the accessories and attachments

are properly xed. A short-time test running in no-load

condition will be helpful to identify any problems.

j) Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to

re and electric shock. Damaging a gas line can lead

to explosion. Penetrating a water line causes property

damage or may cause an electric shock.

k) Keep the handles dry to ensure safe control. Grip the

product securely with two hands so you have full control

at all times.

l) The chisel, chuck and the work piece can become very

hot while working. Do not touch them before they have

cooled down.

m)Ensure that the air vents are always unobstructed

and clear. Clean them if necessary with a soft brush.

Blocked air vents may lead to overheating and damage

the product.

n) Switch off the power tool immediately when the bit

jams. The chisel jams when: the power tool is subject

to overload or it becomes wedged in the workpiece.

Switch the power tool off and then loosen the bit.

o) Switch the product off immediately if you are disturbed

while working by other people entering the working

area. Always let the product come to complete stop

before putting it down.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Erbauer Outils électriques

Erbauer

Erbauer ERB474HT Manuel utilisateur

Erbauer

Erbauer ERB807A Manuel utilisateur

Erbauer

Erbauer ER2100 Manuel utilisateur

Erbauer

Erbauer ERN647ATL-I Manuel utilisateur

Erbauer

Erbauer EJS750 Manuel utilisateur

Erbauer

Erbauer ERB140D Manuel utilisateur

Erbauer

Erbauer EHTIW18-Li Manuel utilisateur

Erbauer

Erbauer ERB380ROU Manuel utilisateur

Erbauer

Erbauer ERB900 Manuel utilisateur

Erbauer

Erbauer ERB383WCH Manuel utilisateur

Erbauer

Erbauer ERI065JSW Manuel utilisateur

Erbauer

Erbauer EMT18-Li-QC Manuel utilisateur

Erbauer

Erbauer ERB108SDR Manuel utilisateur

Erbauer

Erbauer ERI604IPD Manuel utilisateur

Erbauer

Erbauer ERB383WCH Manuel utilisateur

Erbauer

Erbauer ERB567DRH Manuel utilisateur

Erbauer

Erbauer ERB049DRH Manuel utilisateur

Erbauer

Erbauer ERN634ATL Manuel utilisateur

Erbauer

Erbauer EJS18-Li Manuel utilisateur

Erbauer

Erbauer ERB150D Manuel utilisateur

Erbauer

Erbauer ERB706SA Manuel utilisateur

Erbauer

Erbauer EWC1500 Manuel utilisateur

Erbauer

Erbauer EID18-Li Manuel utilisateur

Erbauer

Erbauer ERB210C Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel