Equinox Systems EQLED135 Manuel utilisateur

Order code: EQLED135

MicroPar Bar System

User Manual

www.prolight.co.uk MicroPar Bar System User Manual

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-

FULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageis

between100~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.

• Thisunitisnotintendedforxedinstallation.

• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• Thislightingxtureisforprofessionaluseonly-itis

notdesignedfororsuitableforhouseholduse.The

productmustbeinstalledbyaqualiedtechnicianin

accordancewithlocalterritoryregulations.Thesafetyof

theinstallationistheresponsibilityoftheinstaller.The

xturepresentsrisksofsevereinjuryordeathduetore

hazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingto

EN62471.Donotviewthelightoutputwithoptical

instrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk MicroPar Bar System User Manual

Product overview & technical specications

Acompact,all-in-onelightingpackage,theEquinoxMicroParBarSystem

includesarobust,heavydutystand,heavydutyroadbag,IRremoteand4

multi-colourLEDParpanelsttedtoapoweredT-bar.The4LEDParpanels

areofamicrosizeandslimlinedesignandeachfeature12x1WLEDs

(R:3,G:3,B:3,W:3).Theuserhascontrolovercolour,auto,soundactive

andDMXmodes,viatheLEDdisplayandpushbuttons.TheIRremote

givesinstantandsimplecontroloverseveralcontrolmodes:blackout,auto,

soundandcolour.

•4parseachcontaining12x1WLEDs

(R:3,G:3,B:3,W:3)

•Beamangle:25°

•DMXchannels:5/8or20selectable

•Auto,soundactiveandmaster/slave

modesplusbuilt-inprograms

•0-100%dimmingandvariablestrobe

•4pushbuttonmenuwithLEDdisplay

•3-PinXLRinput/output

•IECpowerinput

•IRremotecontrol

•Heightadjustablestand

•Carrybagincluded

MicroPar Bar System

Specications

Powerconsumption 60W

Powersupply 100~240V,50/60Hz

Fuse F3A250V

Dimensions(withoutstand) 200x720x110mm

Weight 5.7kg

Ordercode EQLED135

200mm

720mm 110mm

POWER INPUT: 100-240V~50/60Hz DMX INPUT DMX OUTPUT MENU UP DOWN ENTER

FUSE: F3A 250V

www.prolight.co.uk

02040706

05 03 01

01-LEDdisplay

02-Functionbuttons

03-DMXinput

04-DMXoutput

05-IECpowerinput

06-FuseF3A250V

07-35mmstandadaptor

Inthebox:1 x xture,

1 x carry bag,

1 x stand & bag,

1 x IR remote,

1 x power cable &

1 x user manual

www.prolight.co.uk MicroPar Bar System User Manual

Operating instructionsOperating instructions

A 1. 0 1

Static colour mode

A 1. 0 1

A 1. 1 5

A 2. 0 1

Colour change mode

A 2. 0 1

A 2. 3 2

A 3. 0 1

Colour fade mode

A 3. 0 1

A 3. 3 2

A 4. 0 1

Sound active mode

A 4. 0 1

A 4. 0 3

A 5. 0 1

Strobe modes

A 5. 0 1

A 5. 3 2

A 6. 0 1

Auto modes

A 6. 0 1

A 6. 3 2

A 7. 0 1

Colour chase modes

A 7. 0 1

A 7. 3 2

Slave mode

S L A u

DMX address & channel settings

d 0 0 1

d 5 1 2

d. 0 0 1

0 5 C H

0 8 C H

2 0 C H

www.prolight.co.uk MicroPar Bar System User Manual

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes

tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof

thextureandeachxtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttonontherearoftheunittoshow

d001ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”

buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.

Nowusethe“UP”and“DOWN”buttonstochooseoneofthe5/8or20DMXchannelmodes.

Pressthe“ENTER”buttontoconrmthesetting.



Operating instructions

8 channel mode:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2 000-255 Strobe(slow-fast)

CH3 000-255 Red(0-100%)

CH4 000-255 Green(0-100%)

CH5 000-255 Blue(0-100%)

CH6 000-255 White(0-100%)

CH7

000-009 Nofunction

010-099 Allparsfullon

100-129 Colourchange

130-159 Colourfade

160-189 Colourchase

190-219 Soundactivemode1

220-249 Soundactivemode2

250-255 Soundactivemode3

CH8 000-255 Speedadjustment

20 channel mode:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2 000-255 Strobe(slow-fast)

CH3 000-255 Red(0-100%)

Par1

CH4 000-255 Green(0-100%)

CH5 000-255 Blue(0-100%)

CH6 000-255 White(0-100%)

CH7 000-255 Red(0-100%)

Par2

CH8 000-255 Green(0-100%)

CH9 000-255 Blue(0-100%)

CH10 000-255 White(0-100%)

CH11 000-255 Red(0-100%)

Par3

CH12 000-255 Green(0-100%)

CH13 000-255 Blue(0-100%)

CH14 000-255 White(0-100%)

CH15 000-255 Red(0-100%)

Par4

CH16 000-255 Green(0-100%)

CH17 000-255 Blue(0-100%)

CH18 000-255 White(0-100%)

CH19

000-009 Nofunction

010-099 Allparsfullon

100-129 Colourchange

130-159 Colourfade

160-189 Colourchase

190-219 Soundactivemode1

220-249 Soundactivemode2

250-255 Soundactivemode3

CH20 000-255 Speedadjustment

5 channel mode:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2 000-255 Red(0-100%)

CH3 000-255 Green(0-100%)

CH4 000-255 Blue(0-100%)

CH5 000-255 White(0-100%)

www.prolight.co.uk MicroPar Bar System User Manual

Static colour mode:

Toaccessstaticcolourmode,pressthe“MENU”buttonontherearoftheunittoshowA1.01

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

betweenA1.01~A1.15.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Colour change mode:

Toaccesscolourchangemode,pressthe“MENU”buttonontherearoftheunittoshowA2.01

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

betweenA2.01~A2.32.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Colour fade modes:

Toaccessthecolourfademodes,pressthe“MENU”buttonontherearoftheunittoshowA3.01

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

betweenA3.01~A3.32.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Sound modes:

Toaccessthesoundactivemodes,pressthe“MENU”buttonontherearoftheunittoshowA4.01

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

betweenA4.01~A4.03.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Strobe modes:

Toaccessthestrobemodes,pressthe“MENU”buttonontherearoftheunittoshowA5.01

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

betweenA5.01~A5.32.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Auto modes:

Toaccesstheautomodes,pressthe“MENU”buttonontherearoftheunittoshowA6.01

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

betweenA6.01~A6.32.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Colour chase modes:

Toaccesstheautomodes,pressthe“MENU”buttonontherearoftheunittoshowA7.01

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose

betweenA7.01~A7.32.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk MicroPar Bar System User Manual

Operating instructions

Master/slave mode:

Tosetthemasterunitselectyourdesiredprogram(staticcolour,colourchange,colourfade,sound

active,strobe,auto,colourchaseorDMX).

Tosettheotherunitsinslavemode,pressthe“MENU”buttononthefrontoftheunittoshowSLAu

ontheLEDdisplay.Pressthe“ENTER”buttontoconrmthesetting.Theunitwillnowruninsequence

withthemasterunit.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

www.prolight.co.uk MicroPar Bar System User Manual

Operating instructions

IR remote functions:

Button functions:

01-Setstheunitintoblackoutonoroff

02-SetstheunitintoDMX-Usethe‘+’and‘-’DMX

buttonstochangetheDMXaddress(001-512)

03-Putstheunitintostaticcolourmode-Usethe‘+’

and‘-’colorbuttonstoselectthedesiredcolour.

04-Putstheunitintocolourchangemode-Usethe‘+’

and‘-’speedbuttonstoselectthedesiredspeed

05-Putstheunitintocolourfademode-Usethe‘+’

and‘-’colourbuttonstoselectthedesiredprogram,

andthe‘+’and‘-’speedbuttonstoselectthe

desiredprogramspeed

06-Putstheunitintosoundactivemode-Usethe‘+’

and‘-’colourbuttonstoselectthedesiredprogram,

andthe‘+’and‘-’senbuttonstoselectthe

desiredsensitivitylevel(1-4)

07-Putstheunitintostrobemode-Usethe‘+’

and‘-’colourbuttonstoselectthedesiredprogram,

andthe‘+’and‘-’speedbuttonstoselectthe

desiredstrobespeed

08-Putstheunitintoautomode-Usethe‘+’and‘-’

speedbuttonstoselectthedesiredspeed

09-Putstheunitintocolourchasemode-Usethe‘+’

and‘-’speedbuttonstoselectthedesiredspeed

10-SetstheunitintoDMX-Usethe‘+’and‘-’DMX

buttonstochangetheDMXaddress(001-512)

11-Setsthestaticcolour/colourprograms-Usethe‘+’

and‘-’buttonstochangethedesiredcolour/program

(note:onlyavailableinthestaticcolour,colourfade,

soundactiveandstrobemodes)

12-Setstheprogramspeedlevel-Usethe‘+’and‘-’

buttonstochangethedesiredprogramspeedlevel

(note:onlyavailableinthecolourchange,colour

fade,strobe,autoandcolourchasemodes)

Setsthesoundsensitivitylevel-Usethe‘+’

and‘-’buttonstochangethedesiredsound

sensitivitylevel(note:onlyavailableinsound

activemode)

DMX A1

A6 A7

A2 A4

–

SPEED

–

COLOR

–

DMX

–

SEN

www.prolight.co.uk MicroPar Bar System User Manual

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk MicroPar Bar System User Manual

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterferance.itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

Table des matières

Autres manuels Equinox Systems Matériel de DJ

Equinox Systems

Equinox Systems Fusion 140 Manuel utilisateur

Equinox Systems

Equinox Systems Scantastic 4 Manuel utilisateur

Equinox Systems

Equinox Systems Truss Booth LED Starcloth System CW MKII Manuel utilisateur

Equinox Systems

Equinox Systems MoonPar Manuel utilisateur

Equinox Systems

Equinox Systems C-Shot Manuel utilisateur

Equinox Systems

Equinox Systems Power Par 54 MKII Manuel utilisateur

Equinox Systems

Equinox Systems Waterwave XP Manuel utilisateur

Equinox Systems

Equinox Systems Triton Beam EQLED071 Manuel utilisateur

Equinox Systems

Equinox Systems SpectraPix Batten Manuel utilisateur

Equinox Systems

Equinox Systems Domin8R II Manuel utilisateur

Equinox Systems

Equinox Systems MIRR22 Manuel utilisateur

Equinox Systems

Equinox Systems Power Par 54 MKIII Manuel utilisateur

Equinox Systems

Equinox Systems EQLED019 Manuel utilisateur

Equinox Systems

Equinox Systems Pulse Tube Lithium Manuel utilisateur

Equinox Systems

Equinox Systems Microbor EQLED60 Manuel utilisateur

Equinox Systems

Equinox Systems Crossfire XP Manuel utilisateur

Equinox Systems

Equinox Systems Fusion 50 MKIII Manuel utilisateur

Equinox Systems

Equinox Systems PRO DJ Booth LED Starcloth System Manuel utilisateur

Equinox Systems

Equinox Systems Cabaret Colour HEX Manuel utilisateur

Equinox Systems

Equinox Systems EQLED003 Manuel utilisateur

Equinox Systems

Equinox Systems MaxiPar Quad Manuel utilisateur

Equinox Systems

Equinox Systems EQLED082 Manuel utilisateur

Equinox Systems

Equinox Systems Confetti Burst EQLED400 Manuel utilisateur

Equinox Systems

Equinox Systems HYPE Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur