Equinox Systems Blitzer Strobe Manuel utilisateur

Order code: EQLED366

Blitzer Strobe

User Manual

www.prolight.co.uk Blitzer Strobe User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageis

between100~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.



• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• Thislightingxtureisforprofessionaluseonly-itis

notdesignedfororsuitableforhouseholduse.The

productmustbeinstalledbyaqualiedtechnicianin

accordancewithlocalterritoryregulations.Thesafetyof

theinstallationistheresponsibilityoftheinstaller.The

xturepresentsrisksofsevereinjuryordeathduetore

hazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingto

EN62471.Donotviewthelightoutputwithoptical

instrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk Blitzer Strobe User Manual 3

Product overview & technical specications

TheBlitzersarecompactall-in-onestrobe,blinderandwashlights,equippedwith132SMDLEDsandan80°

beamangleallenclosedinarobustmetalhousingwithmountingbracket.TheDMXmodesfeaturecontrolover

dimmer,ashspeedandduration.Master/slave,soundactiveandstandalonemodesalsoaddtothemultitude

offeatures.

• 132white5050SMDLEDs(6500K)

• Beamangle:80°

• DMXchannels:1/2/3-1or3-2selectable

• Auto,soundactiveandmaster/slave

modes

• 0-100%dimmingandvariablestrobe

• Suppliedwithhangingbracket

• 4pushbuttonmenuwithLEDdisplay

• IECpowerinput

• 3-PinXLRinput/output

• Convectioncooled

Blitzer Strobe

Specications

Powerconsumption 30W

Powersupply 100~240V,50/60Hz

Fuse F2A250V

Dimensions 120x345x75mm

Weight 1.35kg

Ordercodes EQLED366

120mm

345mm 75mm

www.prolight.co.uk Blitzer Strobe User Manual 4

Technical specications

DMX INPUTMIC DMX OUTPUT

POWER INPUT:

100-240V~50/60Hz

FUSE: F2A 250V

POWER CONSUMPTION: 30W

MENU DOWNUP ENTER

BLITZER

www.prolight.co.uk

11 04

07 08 03 02 05 06

090110

01-Earthpoint

02-LEDdisplay

03-Functionbuttons

04-Microphone

05-DMXinputsocket

06-DMXoutputsocket

07-IECpowerinputsocket

08-FuseF2A250V

09-Hangingbracket

10-Hangingbracket

adjustmentknob

11-Safetyeye

Inthebox:1 x xture,

1 x power cable,

& 1 x user manual

www.prolight.co.uk Blitzer Strobe User Manual 5

Operating instructionsOperating instructions

A 0 0 1

A 5 1 2

A 0 0 1

DMX address setting

A U 0 0

A U 9 9

A U 7 O

Auto mode

S L A U

Slave mode

S 0 0 0

S 0 9 9

S O U N

Sound active

C 1 0 0

C 1 9 9

C F 0 0

C F 9 9

C 0 0 0

Strobe mode

F A 0 0

F A 9 9

F F 0 0

F F 9 9

F A 0 0

Fade mode

1Ch

2Ch

3 C h 1

3 C h 2

C h

DMX channel setting

www.prolight.co.uk Blitzer Strobe User Manual 6

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes

tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof

thextureandeachxtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshowA001

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe

requiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting. Toexitoutofanyoftheabove

options,pressthe“MENU”button.

DMX channel mode:

ToaccesstheDMXchannelmode,pressthe“MENU”buttononthefrontoftheunittoshowChonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseoneofthe

1/2/3-1or3-2DMXchannelmodes.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.



Operating instructions

PLEASE NOTE:WhentheunitisreceivingDMXtherstreddotonthedisplaywillash.

2 channel mode:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-250 Strobe(slow-fast)

251-255 Nofunction

3 channel mode 1:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-250 Strobe(slow-fast)

251-255 Nofunction

CH3 000-255 Flashduration(slow-fast)

3 channel mode 2:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-033 Strobepulse(slow-fast)

034-056 Stroberampup(slow-fast)

057-079 Stroberampdown(slow-fast)

080-102 Stroberandom(slow-fast)

103-127 Strobe(shortash)

128-250 Strobe(slow-fast)

251-255 Nofunction

CH3 000-005 SoundactiveOFF

006-255 SoundactiveON(senslow-high)

1 channel mode:

Channel Value Function

CH1 000-010 Nofunction

011-255 Strobe(slow-fast)

www.prolight.co.uk Blitzer Strobe User Manual 7

Operating instructions

Master/slave mode:

Tosetthemasterunit,selectyourdesiredprogram(soundactive,auto,strobeorfademodes).

Tosettheotherunitsinslavemode,pressthe“MENU”buttononthefrontoftheunittoshowSLAU

ontheLEDdisplay.Pressthe“ENTER”buttontoconrmthesetting.Theunitwillnowruninsequence

withthemasterunit.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Strobe mode:

Toaccessthestrobemode,pressthe“MENU”buttononthefrontoftheunittoshowC000onthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseC1.00.

Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthebrightnessbetween

00~99.Value: 00 - 99 (00 = low, 99 = high). Nowpressthe“ENTER”buttonandusethe“UP”and

“DOWN”buttonstochooseCF.00.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

toselectthestrobespeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Fade mode:

Toaccessthefademode,pressthe“MENU”buttononthefrontoftheunittoshowFA00ontheLED

display.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseFA.00.

Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthefadespeedbetween

00~99.Value: 00 - 99 (00 = slow, 99 = fast). Nowpressthe“ENTER”buttonandusethe“UP”and

“DOWN”buttonstochooseFF.00.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

toselectthestrobespeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Auto mode:

Toaccesstheautomode,pressthe“MENU”buttononthefrontoftheunittoshowAUTOonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselecttheauto

programspeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Sound/sound sensitivity:

Toaccessthesoundmode,pressthe“MENU”buttononthefrontoftheunittoshowSOUNonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthesound

sensitivitybetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = low, 99 = high). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk Blitzer Strobe User Manual 8

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk Blitzer Strobe User Manual 9

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterference.itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

www.prolight.co.uk Blitzer Strobe User Manual 10

WEEE notice

Correct Disposal of this Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries

with separate collection systems)

Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof

withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe

environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother

typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.

Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir

localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally

saferecycling.

Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe

purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Equinox Systems Matériel de DJ

Equinox Systems

Equinox Systems FEVER Manuel utilisateur

Equinox Systems

Equinox Systems Waterwave 50W Manuel utilisateur

Equinox Systems

Equinox Systems FXbar18 Manuel utilisateur

Equinox Systems

Equinox Systems EQLED054 Manuel utilisateur

Equinox Systems

Equinox Systems Quad Pix Batten Manuel utilisateur

Equinox Systems

Equinox Systems Helix 100W Gobo Flower Manuel utilisateur

Equinox Systems

Equinox Systems FUSION SPOT XP MKIII Manuel utilisateur

Equinox Systems

Equinox Systems Waterwave XP Manuel utilisateur

Equinox Systems

Equinox Systems PRO DJ Booth Quad-colour Starcloth Manuel utilisateur

Equinox Systems

Equinox Systems EQLED162 Manuel d'installation et d'exploitation

Equinox Systems

Equinox Systems Fusion 200 Zoom Spot Manuel utilisateur

Equinox Systems

Equinox Systems SpectraPix Batten EQLED055 Manuel utilisateur

Equinox Systems

Equinox Systems EQLED136 Manuel utilisateur

Equinox Systems

Equinox Systems Viper Manuel utilisateur

Equinox Systems

Equinox Systems Six Shooter MKII Manuel utilisateur

Equinox Systems

Equinox Systems Graphix Manuel utilisateur

Equinox Systems

Equinox Systems EQLED127 Manuel utilisateur

Equinox Systems

Equinox Systems MaxiPar Tri MKII Manuel utilisateur

Equinox Systems

Equinox Systems HYPE Manuel utilisateur

Equinox Systems

Equinox Systems SpectraPix Batten Manuel utilisateur

Equinox Systems

Equinox Systems Hot Rod EQLED089 Manuel utilisateur

Equinox Systems

Equinox Systems Colour Raider Uplighter Pack Manuel utilisateur

Equinox Systems

Equinox Systems EQLED368 Manuel utilisateur

Equinox Systems

Equinox Systems Truss Booth LED Starcloth System CW MKII Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur