Epson B12B813362 Manuel utilisateur

44 Using Optional Equipment

Transparency Unit

The transparency unit (B12B813362) lets you scan transparent materials—35 mm

slides, filmstrips, and negatives, 4 × 5 inch film, medium format (120/220) film, and

nonstandard film sizes up to 12.2 × 16.5 inches (309 × 420 mm). To switch

from scanning transparent materials to ordinary paper documents, see page 52.

Note: The transparency unit is optional for the GA version of the Expression 10000XL. It

is included with the Photo version.

Unpacking the Transparency Unit

Make sure that all of the following items are included in the transparency unit box. If

any items are missing or damaged, contact your Epson dealer, or contact Epson at

(562) 276-4382 (in the United States) or (905) 709-3839 (in Canada). Keep all the

packing materials so you can use them for storage when you are not scanning

transparencies.

Transparency unit

(including reflective

document mat)

Film holders

(two of each type)

Transparency guide

10000XL.book Page 44 Friday, June 4, 2004 1:57 PM

Using Optional Equipment 45

Installing the Transparency Unit

1. Make sure the scanner is turned off, then

unplug the power cord from the scanner.

2. Fully open the scanner’s document cover,

then lift it straight up.

3. Lower the transparency unit onto the

scanner, so that the pins fit into the holes as

shown.

4. Use a coin to turn the transportation lock

to the Unlock position.

Document

cover

Transparency

unit

10000XL.book Page 45 Friday, June 4, 2004 1:57 PM

46 Using Optional Equipment

5. Close the transparency unit.

6. Connect the transparency unit cable

to the scanner’s OPTION port, then

tighten its screws.

Using the Transparency Unit

Before using the transparency unit (TPU), you need to remove the reflective

document mat and make sure the glass on both the document table and the TPU

is clean.

1. Open the transparency unit.

2. Grasp the white reflective document mat by

its top edge and slide it upward to free the

bottom edge of the mat.

3. Lower the mat slightly to free the tabs at the

top edge, then remove the mat.

4. Place the mat in the storage pocket located

on top of the TPU.

5. Make sure the glass on the scanner’s

document table and on the TPU is

completely clean and free of dust. If

necessary, use a soft cloth to wipe it clean.

Caution: Never spray glass cleaner directly on the document table. Always spray

it on a cloth first and then wipe the glass.

10000XL.book Page 46 Friday, June 4, 2004 1:57 PM

Using Optional Equipment 47

6. Place the transparency guide at the

back edge of the document glass, so

that its alignment pins fit into the

holes as shown.

Placing Standard Film Sizes on the Scanner

Use the film holders that came with the transparency unit to scan 35 mm slides,

filmstrips, and negatives, 4 × 5 inch film, and medium format (120/220) film.

1. Place the film holder on a flat surface. Open its cover (if it has one), then load the

film with its shiny side face down and the film emulsion layer face up.

L400 16

35 mm slides 35 mm strips

Medium format film4 × 5 inch film

10000XL.book Page 47 Friday, June 4, 2004 1:57 PM

48 Using Optional Equipment

2. Make sure the transparency guide is in

place at the back edge of the document

glass (see page 47). Then place the film

holder on the document glass, aligning

the arrow marks as shown.

When scanning large numbers of images,

youcanplace a second film holder on the

scanner next to the first one. The holders

can be for different sizes of film (unless

you plan to scan 35 mm slides using the Thumbnail preview screen; see page 50).

3. Close the transparency unit and scan as described on page 49.

Note: If the transparency unit is not closed, you will get an error message and be

unable to scan.

Placing Nonstandard Film Sizes on the Scanner

You can scan film in nonstandard sizes up to 12.2 × 16.5 inches (309 × 420 mm).

Follow these guidelines:

1. Make sure the transparency guide is in place at the back edge of the document

glass (see page 47).

2. Setyourfilmdirectlyonthedocument

glass, with the shiny side face down

and the film emulsion layer face up.

Align the film with the edge of the

transparency guide, as shown.

3. Close the transparency unit and scan

as described in the next section.

Note: When setting film directly on the

glass or using film holders other than

those that came with the scanner, be sure to adjust the focus (see page 50).

10000XL.book Page 48 Friday, June 4, 2004 1:57 PM

Using Optional Equipment 49

Scanning Your Film

You can scan your film in either Home Mode or Professional Mode. For greater

control over your scanned images, choose Professional Mode.

Note: Be sure to select the correct Document Type (in Home Mode) or Film Type (in

Professional Mode): Positive Film, Color Negative Film, or B&W Negative Film.

Also, be sure to adjust the focus if you’re placing your film directly on the glass (instead

of in a holder) or are using film holders other than those that came with the scanner. See

page 50.

If you’re using Professional Mode, follow these steps:

1. Open your imaging application, then choose the Import (or Acquire) option in

the application and select Epson Expression 10000XL.

Note: If you are using Windows XP and choose WIA-EPSON Expression

10000XL, certain features won’t be available.

The EPSON Scan dialog box

opens.

2. Select Professional Mode

from the selection box at the

top of the screen.

Note: You may have to scroll

down to see all of the settings.

3. Under the Original settings,

select Film as your

Document Type, and then

select the correct Film Type

(Positive Film, Color

Negative Film, or B&W Negative Film).

4. Under the Destination settings, choose a color depth from the Image Type menu:

■48-bit Color for the highest quality color scans

Note: If you choose this option, make sure your application supports 48-bit

image files (Photoshop Elements does not support 48-bit color). This option

significantly increases your file size.

■24-bit Color for high quality color scans

Select

Professional Mode

Scroll down to see

more options

10000XL.book Page 49 Friday, June 4, 2004 1:57 PM

50 Using Optional Equipment

■Color Smoothing to reduce color variations without lessening sharpness

■16-bit Grayscale for the highest quality scans of black-and-white photos or

images

Note: Make sure your application supports 16-bit grayscale.

■8-bit Grayscale for high quality scans of black-and-white photos or images

Click (Windows) or (Macintosh) to see more options, then choose Best or

Draft for the Scanning Quality.

5. Choose a resolution setting (50 to 12800 dpi). See page 30 for guidelines.

6. If you’re scanning 35 mm slides, you can

click the arrow next to the Preview button

and select Thumbnail as the type of

preview screen you want to use. This

locateseachimageautomatically,speeding

up your workflow (see page 38).

For all other types of film, make sure Normal is selected.

7. Click the Preview button to see previews of your images.

8. Click and drag within each image to select just the area you want to scan. For best

results, avoid including borders in your image. This enables EPSON Scan to

apply the optimal exposure and color balance settings (see page 31).

9. If you’re not using the film holders that came with your TPU, you’ll have to reset

the focus. Click the All button (to select all the images) or click a specific image to

adjust, and then do one of the following:

■If you’ve placed your film directly on the document glass, click the

Manual focus button on the preview screen, set the focus position to

0.0, and then click OK.

■If you’re using a non-Epson film holder, manually adjust the focus to the

position specified for your holder, or click the Auto focus button to

adjust the focus position automatically.

Select Thumbnail

10000XL.book Page 50 Friday, June 4, 2004 1:57 PM

Using Optional Equipment 51

10. Use these Adjustment settings (on the main screen) to modify your images as

necessary.

Auto Adjust – If you’ve turned off Continuous auto exposure, click this

button to apply your color management settings and have the software

determine the best exposure and color balance for your scan. (If Continuous

auto exposure is turned on, clicking this button has no effect; see page 31.)

Histogram Adjustment – Click this button to adjust the highlight, shadow,

and gamma input levels.

Tone Correction – Click this button to choose a preset tone curve for specific

effects or to change the tone curve manually.

Image Adjustment – Click this button to adjust the color balance, saturation,

brightness, and contrast settings.

For any of these settings, you can click Reset to go back to the default settings for

an image. Click the Help for more information about using these options.

11. To enhance the appearance of your images, select from the following options:

■To sharpen an image, select

Unsharp Mask Filter.

■To reduce the appearance of graininess

in your film, select Grain Reduction.

■To correct the color on faded photos,

select Color Restoration.

■To digitally remove unwanted specks of dust, select Dust Removal.

Click (Windows) or (Macintosh) next to eachsetting and then choose a Level

to increase or decrease the effect. For more information about these options, see

page 33.

12. Click Scan.

13. Whenscanning completes, click Close to exit EPSON Scan and view the scanned

images in your imaging application.

10000XL.book Page 51 Friday, June 4, 2004 1:57 PM

52 Using Optional Equipment

Scanning Paper Documents

If you want to scan an ordinary paper document while leaving the transparency unit

installed, follow these steps.

1. Remove the transparency guide.

2. Insert the reflective document mat, top

edge first, being careful to keep the mat’s

whitesurfacefrom gettingcaughtunder the

frame of the TPU.

3. Insertthe tabs along the bottom edge of the

mat to hold it in place.

4. Scan your document, following the

instructions in Chapter 1 for the mode that

you’re using.

Note: If you’re scanning in Professional

Mode, be sure to select Reflective as your

Document Type.

10000XL.book Page 52 Friday, June 4, 2004 1:57 PM

Table des matières

Autres manuels Epson Scanner

Epson

Epson Expression 800 Manuel utilisateur

Epson

Epson Expression 1600 Manuel utilisateur

Epson

Epson ES-C220 Manuel utilisateur

Epson

Epson Perfection 610 Scanner Manuel utilisateur

Epson

Epson Perfection 1670 Manuel utilisateur

Epson

Epson Expression 10000XL Series Manuel utilisateur

Epson

Epson 1680 - Expression Special Edition Mode d’emploi

Epson

Epson Perfection 660 Manuel utilisateur

Epson

Epson DS-575W Mode d’emploi

Epson

Epson Personal Document Station Manuel utilisateur

Epson

Epson WorkForce DS-40 Manuel utilisateur

Epson

Epson 00000650 - Perfection 3200 PRO Color Scanner Manuel utilisateur

Epson

Epson 1000XL Manuel utilisateur

Epson

Epson SeriesPerfection 1240U Series Manuel utilisateur

Epson

Epson Expression 12000XL Manuel utilisateur

Epson

Epson 1250 - Perfection Photo Flatbed Scanner Instructions d'installation et d'utilisation

Epson

Epson DS-30000 Manuel utilisateur

Epson

Epson Perfection 3490 Photo Mode d’emploi

Epson

Epson Perfection V37 Mode d’emploi

Epson

Epson Perfection 1250 Manuel

Epson

Epson 2480 - Perfection Photo Manuel utilisateur

Epson

Epson 3170 - Perfection Photo Manuel utilisateur

Epson

Epson Expression 10000XL Series Manuel utilisateur

Epson

Epson 1640SU - Perfection Photo Scanner Dimensions

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur